scGenSwitchPromptMessage
XSWITCH-MIB ·
.1.3.6.1.4.1.81.28.1.5.1.1.34
Object
column
mandatory
r/w
OctetString
The textual message of the Prompt message that should be displayed.
Context
- MIB
- XSWITCH-MIB
- OID
.1.3.6.1.4.1.81.28.1.5.1.1.34- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- scGenSwitchEntry
- Table
- scGenSwitchTable
- Siblings
- 37
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| scGenSwitchId mandatory Index which identifies the XSwitch for which this entry contains information.
This value is never greater than chNumberOfXSwitches. | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.1 |
| scGenSwitchNumberOfLoads mandatory This attribute identifies the total number of loads of that Xswitch.
There is a maximum budget of 30 loads on an single Xswitch. | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.10 |
| scGenSwitchAgVLAN mandatory The Virtual LAN number of the Agent's internal interface in the switch.
The value 0 means Generic (But can communicate with Global !).
The value '255' means Global. | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.11 |
| scGenSwitchVLANList mandatory A bitmap defining the status of the virtual LANs in the
Virtual LAN Table. The first bit is for Virtual LAN 0, the
second for Virtual LAN 1, and so on. If the Virtual LAN
exist… | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.12 |
| scGenSwitchSTA mandatory Enable /Disable the Spanning Tree protocol support in the switch. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.13 |
| scGenSwitchSecurityMode mandatory This item defines the Security mode per stack.
nonSecurityMode - all ports in the stack are not secure.
securityMode - all ports in the stack are secure according to their scGenPo… | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.14 |
| scGenSwitchFindQuery mandatory An address to be searched for by the Agent.
The Agent will start look for the address when the value is
different than Null.
The string format is:
1st byte: address type - 0=MAC… | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.15 |
| scGenSwitchFindResult mandatory The search result. The result string format is:
1st byte: address type - 0=MAC, 1=IP.
Next bytes: the address. (for MAC: next 6 bytes,
for IP: next 4 bytes)
7-th byte (for MAC) o… | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.16 |
| scGenSwitchSWRdChange mandatory A 4-byte octet-string indicating a change performed by the SW Redundancy task.
The string will include:
Byte 1: Group1 (module number).
Byte 2 : Port1
Byte 3 : Group2
Byte 4 : … | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.17 |
| scGenSwitchDefaultVLAN mandatory Attribute describing the Default VLAN configuration on the switch ports.
The user may change the value of this parameter through the setup terminal.
Vlan1 is the standard default … | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.18 |
| scGenSwitchVLANBridging mandatory VLAN Bridging mode should be enabled in all Xswitches in the network, when the user
wants to support network-wide VLAN Bridging. VLAN Bridging should also be enabled
in one M-MLS,… | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.19 |
| scGenSwitchCopyMode mandatory Enable /Disable the Copy Port mode in the XSwitch. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.2 |
| scGenSwitchOldVersionModules mandatory A list of modules, in ASCII format, that have older software versions than
necessary in the switch. Module numbers are separated by a comma and a space.
It is used to inform the u… | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.20 |
| scGenSwitchVIDPNonSupportedModules mandatory A list of modules, in ASCII format, that do not support the VIDP function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems … | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.21 |
| scGenSwitchSTANonSupportedModules mandatory A list of modules, in ASCII format, that do not support the STA function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems i… | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.22 |
| scGenSwitchIDSNonSupportedModules mandatory A list of modules, in ASCII format, that do not support the IDS function.
Module numbers are separated by a comma and a space.
It is used to inform the user on possible problems i… | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.23 |
| scGenSwitchMcFilter mandatory Enable/disable the multicast filtering mechanism supported in the switch | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.24 |
| scGenSwitchMcFilterHostAgingTime mandatory The Value of the Host-Aging-Time parameter used by the multicast filtering
mechanism for aging learned multicast filtering information | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.25 |
| scGenSwitchMcFilterRouterAgingTime mandatory The Value of the Router-Aging-Time parameter used by the multicast filtering
mechanism for aging learned router-ports information | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.26 |
| scGenSwitchMcFilterDelayTime mandatory The Value of the Delay-Time parameter used by the multicast filtering
mechanism for waiting to all registration requests before applying a filter
on a specific group | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.27 |
| scGenSwitchLACPMode mandatory The value of this attribute determines whether LACPDU messages can be exchanged by the switch's ports.
If enabled, the ports will exchange LACPDU messages according to their scGen… | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.28 |
| scGenSwitchSecurityModePermit mandatory This item defines the Security mode per switch.
This MIB is encoded in AVAYA specific security mechanism. | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.29 |
| scGenSwitchCopySource mandatory The port in the switch that is being copied.
All received and transmit packets on the port( including local traffic ) are copied to
the defined destination, besides their normal … | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.3 |
| scGenSwitchFastAgingOnRemoteTopChg mandatory This item defines if the switch performs fast aging on the MAC address
forwarding database (or reset the cam contents) upon reception of
Topology Change BPDU from the STA root, i… | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.30 |
| scGenSwitchGigaMode mandatory The value of this attribute determines the setting for the two Giga links of a P130 stack. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.31 |
| scGenSwitchCAMClear mandatory When value sets to on(1), the switch clears its CAM table.
This item will always return a value of off(2), since it acts like a toggle switch. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.32 |
| scGenSwitchWelcomeMessage mandatory The textual message of the welcome message that should be displayed upon
power on or telneting to the system. | column | OctetString | .1.3.6.1.4.1.81.28.1.5.1.1.33 |
| scGenSwitchMacAging mandatory Enable/Disable filtering database entries (MAC) aging | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.35 |
| scGenSwitchSecurityAction mandatory Specifies global security violation action.
Drop - drop intruder packets for 5 seconds.
dropAndNotify - Drop and notify.
shutdownAndNotify - Administratively Disable port (… | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.36 |
| scGenSwitchDot1xPortMaxSuppNum mandatory Maximum number of supplicant allowed per port.
Possible values 1-8.
DEFAULT is 2. | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.37 |
| scGenSwitchDot1xLldpTxVlanName mandatory This MIB item includes additional information for the extension of 802.1x
multi-supplicant mode and LLDP application.
If this MIB is Enable and if there was authentication on on… | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.38 |
| scGenSwitchCopyDestination mandatory The destination of the copied information.
The destination can be another port or the Agent acting as an RMON probe.
The value of this item is: 1024*S+P,
where S is the slot num… | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.4 |
| scGenSwitchSetDefaults mandatory Set all port parameters in the XSwitch, to their default values.
This item will always return a value of off(2), since it acts like a toggle switch. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.5 |
| scGenSwitchVIDP mandatory Enable /Disable the VIDP protocol supported in the XSwitch. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.6 |
| scGenSwitchType mandatory This attribute defines the type of the Xswitch. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.7 |
| scGenSwitchMasterId mandatory This attribute defines which module in the Xswitch take the role of the Master.
It is equal to the slot number of the Xswitch Master. | column | Integer32 | .1.3.6.1.4.1.81.28.1.5.1.1.8 |
| scGenSwitchReset mandatory Setting this attribute to `on' will cause a reset to the Xswitch. Default value is 'off'. | column | Enumeration | .1.3.6.1.4.1.81.28.1.5.1.1.9 |