scEthPortPauseCapabilities
XSWITCH-MIB ·
.1.3.6.1.4.1.81.28.2.1.1.1.44
Object
column
mandatory
r/w
Enumeration
The Pause capabilities of a Giga port that should be advertised to the link
partner when performing auto-negotiation:
noFlowControl (1) - no flow control support in any direction
asymTxFlowControlOnly (2) - STD 802.3x flow control frames can be sent from this port,
but flow control packets received on it can not be processed.
symFlowControlOnly (3) - STD 802.3x flow control frames must be supported in both directions
symAndAsymRxFlowControl (4) -
STD 802.3x flow control frames must be supported in both directions or
at least received flowcontrol frames on this port can be processed.
Context
- MIB
- XSWITCH-MIB
- OID
.1.3.6.1.4.1.81.28.2.1.1.1.44- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- scEthPortEntry
- Table
- scEthPortTable
- Siblings
- 46
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noFlowControl |
2 | asymTxFlowControlOnly |
3 | symFlowControlOnly |
4 | symAndAsymRxFlowControl |
255 | notSupported |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| scEthPortGroupId mandatory Id of the group to which the port belongs. | column | Integer32 | .1.3.6.1.4.1.81.28.2.1.1.1.1 |
| scEthPortJabber mandatory The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets), and were not an integral number of octets in
length o… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.10 |
| scEthPortCollisions mandatory The best estimate of the total number of collisions on this
Ethernet segment. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.11 |
| scEthPortPkts64Octets mandatory The total number of packets (including error packets)
that were 64 octets in length (excluding framing
bits but including FCS octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.12 |
| scEthPortPkts65to127Octets mandatory The total number of packets (including error packets)
that were between 65 and 127 octets in length
inclusive (excluding framing bits but including FCS
octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.13 |
| scEthPortPkts128to255Octets mandatory The total number of packets (including error packets)
that were between 128 and 255 octets in length
inclusive (excluding framing bits but including FCS
octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.14 |
| scEthPortPkts256to511Octets mandatory The total number of packets (including error packets)
that were between 256 and 511 octets in length
inclusive (excluding framing bits but including FCS
octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.15 |
| scEthPortPkts512to1023Octets mandatory The total number of packets (including error packets)
that were between 512 and 1023 octets in length
inclusive (excluding framing bits but including FCS
octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.16 |
| scEthPortPkts1024to1518Octets mandatory The total number of packets (including error packets)
that were between 1024 and 1518 octets in length
inclusive (excluding framing bits but including FCS
octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.17 |
| scEthPortGoodPktsRec mandatory The total number of good packets received by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.18 |
| scEthPortBadPkts mandatory The total number of bad packets filtered by the port.
This item is the summation of:
scEthPortCRCAlignErrors, scEthPortOversizePkts,
scEthPortFragments and scEthPor… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.19 |
| scEthPortId mandatory Unique Id of the port in the scEthPortTable. | column | Integer32 | .1.3.6.1.4.1.81.28.2.1.1.1.2 |
| scEthPortGoodOctetsRec mandatory The total number of good octets of data received by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.20 |
| scEthPortBadOctets mandatory The total number of bad octets of data filtered by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.21 |
| scEthPortGoodBroadcastOctetsRec mandatory The total number of good octets received that were
directed to the broadcast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.22 |
| scEthPortGoodMulticastOctetsRec mandatory The total number of good octets received that were
directed to a multicast address. Note that this number does
not include octets directed to the broadcast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.23 |
| scEthPortGoodOctetsSent mandatory The total number of good octets of data sent by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.24 |
| scEthPortGoodPktsSent mandatory The total number of good packets sent by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.25 |
| scEthPortLateCollisions mandatory The best estimate of the total number of late collisions on
this Ethernet segment. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.26 |
| scEthPortFunctionalStatus mandatory The functional status of the port:
ok(1) - fully functional port, transmitting and receiving
packets.
rld(2) - receive link down condition on the port - Indicates
a cable or co… | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.27 |
| scEthPortMode mandatory The flow control mode of the port when operated in full duplex:
halfDuplex(1) - Half duplex connection, standard mode for segment
fullDuplexNoPause(2) - Full duplex connection wit… | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.28 |
| scEthPortSpeed mandatory This parameter defines the port speed:
ethernet(1) and fastEthernet(2). | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.29 |
| scEthPortOctetsRec mandatory The total number of good octets received and bad octets
filtered by the port (excluding framing bits but including
FCS octets).
This item is the summation of scEthPortGoodOctetsR… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.3 |
| scEthPortAutoNegotiation mandatory This object define if the Auto Sense /Auto Negotiation
process is enable(1) or disable (2)
for modules that don't support the Auto Snese mode
please define the notSupported opt… | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.30 |
| scEthPortAutoNegotiationStatus mandatory This object define the status of the Auto Negotiation process:
pass: The Auto negotiation process was completed and succeeded .
fail: The Auto Negotiation process failed .
disa… | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.31 |
| scEthPortTotalOctets mandatory The total number of octets received and transmitted on
the port (including all good and bad).
This item is the summation of scEthPortOctetsRec
and scEthPortGoodOctetsSent. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.32 |
| scEthPortTotalPkts mandatory The total number of packets received and transmitted on
the port (including all good and bad).
This item is the summation of scEthPortPktsRec
and scEthPortGoodPktsSent. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.33 |
| scEthPortDropEvents mandatory The total number of events in which the probe could not
count packets due to lack of resources. This number is not
necessarily the number of packets dropped; it is just the
num… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.34 |
| scEthPortGigaPauseStatus mandatory Indicates the status of the Flow Control as determined in the Auto Negotiation process on the
Gigabit ports:
noPause(1) indicates that there is no Flow Control.
symmetricPause(2)… | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.35 |
| scEthPortLower32OctetsRec mandatory Lower 32 bit conter of the total number of octets of data received by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.36 |
| scEthPortUpper32OctetsRec mandatory Upper 32 bit conter of the total number of octets of data received by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.37 |
| scEthPortLower32OctetsSent mandatory Lower 32 bit conter of the total number of octets of data sent by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.38 |
| scEthPortUpper32OctetsSent mandatory Upper 32 bit conter of the total number of octets of data sent by the port. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.39 |
| scEthPortPktsRec mandatory The total number of good packets received and bad
packets filtered by the port.
This item is the summation of scEthPortGoodPktsRec
and scEthPortBadPkts. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.4 |
| scEthPortGoodUnicastPktsRec mandatory The total number of good packets received that were directed to a unicast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.40 |
| scEthPortDiscardPktsRec mandatory The total number of packets which were chosen to be discarded even
though no errors had been detected to prevent their being deliverable
to a higher-layer protocol. One possible r… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.41 |
| scEthPortUnicastPktsSent mandatory The total number of good packets sent by the port
that were directed to a unicast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.42 |
| scEthPortDiscardPktsSent mandatory The total number of packets which were chosen to be discarded even though no errors
had been detected to prevent their being transmitted.
One possible reason for discarding such a… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.43 |
| scEthPortMulticastPktsSent mandatory The total number of good packets sent by the port that were directed to a multicast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.45 |
| scEthPortUndersizePktsRec mandatory The total number of packets received that were less than 64 octets long (excluding framing
bits, but including FCS octets) and were otherwise well formed. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.46 |
| scEthPortFlowControl mandatory The flow control mode of the port | column | Enumeration | .1.3.6.1.4.1.81.28.2.1.1.1.47 |
| scEthPortGoodBroadcastPktsRec mandatory The total number of good packets received that were
directed to the broadcast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.5 |
| scEthPortGoodMulticastPktsRec mandatory The total number of good packets received that were
directed to a multicast address.
Note that this number does not include packets directed to
the broadcast address. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.6 |
| scEthPortCRCAlignErrors mandatory The total number of packets received that had a length
(excluding framing bits, but including FCS octets) of
between 64 and 1518 octets, inclusive, but were not an
integral num… | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.7 |
| scEthPortOversizePkts mandatory The total number of packets received that were longer
than 1518 octets (excluding framing bits, but including
FCS octets) and were otherwise well formed. | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.8 |
| scEthPortFragments mandatory The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets). | column | RFC1155-SMICounter | .1.3.6.1.4.1.81.28.2.1.1.1.9 |