S5-ETHERNET-COMMON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

s5EnPortTable

table

.1.3.6.1.4.1.45.1.6.6.1.1 · 1 row entry · 6 columns

Open in standard view

A table containing information about each
managed ethernet connectivity port on a board.
The number of entries is determined by the
number of managed ports. Those boards
that do not have any ports do not have
any entries in this table.

s5EnPortEntry entry .1.3.6.1.4.1.45.1.6.6.1.1.1

A row in Ethernet port table. Entries
can not be created or deleted via SNMP.

Indexes

s5EnPortBrdIndx s5EnPortIndx

Column Syntax OID

s5EnPortBrdIndx

The index of the board. This corresponds to
the index of the slot containing the board.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.45.1.6.6.1.1.1.1

s5EnPortIndx

The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.45.1.6.6.1.1.1.2

s5EnPortPartStatus

The partition status of the port.
The following values can be written:
enabled(2)..........enabled port
partition(3)........partition port
timedPartition(5)...time partition port (uses value
…

Enumerationr/w

Enumerated Values:

1	other
2	enabled
3	partition
4	autoPartition
5	timedPartition

.1.3.6.1.4.1.45.1.6.6.1.1.1.3

s5EnPortPartTime

The length of time to keep the port
partitioned when a timed partition is
done to the port. This object can only
be written in the same request that sets
s5EnPortPartStatus to timedPartition(5).
Afterwards, it indicates…

S5-TCS-MIBTimeIntervalSecr/w

Textual Convention: S5-TCS-MIBTimeIntervalSec Integer32

.1.3.6.1.4.1.45.1.6.6.1.1.1.4

s5EnPortLinkStatus

Tells whether the port is receiving
link status. The values are:
other(1)...returned for AUI
off(2).....link is not connected
on(3)......link is connected
on/off applies to 10BASE-T and Fiber ports only.

Enumeration

Enumerated Values:

1	other
2	off
3	on

.1.3.6.1.4.1.45.1.6.6.1.1.1.5

s5EnPortJabberStatus

The jabber status of the DTE(s) connected
to the port. The values are:
other(1).......unknown or other condition
jabbering(2)...port receiving jabber
ok(3)..........no jabber detected.

Enumeration

Enumerated Values:

1	other
2	jabbering
3	ok

.1.3.6.1.4.1.45.1.6.6.1.1.1.6

s5EnPortExtTable

table

.1.3.6.1.4.1.45.1.6.6.1.3 · 1 row entry · 11 columns

Open in standard view

An extension table to s5EnPortTable containing 
additional information about per port
switchable, autonegotiating 10/100 Mbit
ethernet connectivity ports on a board.
The number of entries is determined by the
number of managed ports. Those boards
that do not have any ports do not have
any entries in this table.

s5EnPortExtEntry entry .1.3.6.1.4.1.45.1.6.6.1.3.1

A row in Ethernet port extension table.
Entries can not be created or deleted
via SNMP.

Indexes

s5EnPortExtBrdIndx s5EnPortExtIndx

Column Syntax OID

s5EnPortExtBrdIndx

The index of the board. This corresponds to
the index of the slot containing the board.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.45.1.6.6.1.3.1.1

s5EnPortExtIndx

The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.45.1.6.6.1.3.1.2

s5EnPortExtHwCapability

A bit array that contains the bit map
representing the hardware capabilites
of the port. The bit 7 tells if the port
supports auto-negotiation. If the auto negotiation
is on, the port will have multiple speed capabi…

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.45.1.6.6.1.3.1.3

s5EnPortExtAutoNegAdv

A bit array that contains the bit map
representing the abilities advertised
during link negociation. The bit 7 tells
if auto negotiation is enabled or disabled:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T…

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.45.1.6.6.1.3.1.4

s5EnPortExtAutoNegRcvd

A bit array that contains the bit map
representing the auto-negotiation
abilities of the remote end of the link:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full duplex capable
bit 2 - 100 BASE-TX half du…

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.45.1.6.6.1.3.1.5

s5EnPortExt10MbSegAttCfg

The index for the segment used in case
a 10 Mbit link is established.

S5-TCS-MIBAttIdr/w

Textual Convention: S5-TCS-MIBAttId Integer32

Type Constraints:
range: -255..255

.1.3.6.1.4.1.45.1.6.6.1.3.1.6

s5EnPortExt100MbSegAttCfg

The index for the segment used in case
a 100 Mbit link is established.

S5-TCS-MIBAttIdr/w

Textual Convention: S5-TCS-MIBAttId Integer32

Type Constraints:
range: -255..255

.1.3.6.1.4.1.45.1.6.6.1.3.1.7

s5EnPortExt10MbSegConnCapability

A bit array that contains the bit map
representing all available 10Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the cluster has an isolate
capability.
…

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.45.1.6.6.1.3.1.8

s5EnPortExt100MbSegConnCapability

A bit array that contains the bit map
representing all available 100Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the cluster has an isolate
capability.
…

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.45.1.6.6.1.3.1.9

s5EnPortExtActiveSpeed

The speed of the link. The possible
values are:
unknown(1)........unknown, no link
bps10M(2).........10 Mbit link
bps100M(3)........100 Mbit link

Enumeration

Enumerated Values:

1	unknown
2	bps10M
3	bps100M

.1.3.6.1.4.1.45.1.6.6.1.3.1.10

s5EnPortExtCurDuplexMode

The status of duplex mode. The possible
values are:
unknown(1)........unknown, no link
halfDuplex(2).........half duplex mode
fullDuplex(3)........full duplex mode

Enumeration

Enumerated Values:

1	unknown
2	halfDuplex
3	fullDuplex

.1.3.6.1.4.1.45.1.6.6.1.3.1.11

s5EnBStatTable

table

.1.3.6.1.4.1.45.1.6.6.2.1 · 1 row entry · 19 columns

Open in standard view

A table containing Ethernet basic
statistics. The entries in the table
may come from several different data
sources. The number of entries is
determined by the number of sources
that can provide the information.

s5EnBStatEntry entry .1.3.6.1.4.1.45.1.6.6.2.1.1

A row in Ethernet basic statistics table.
Entries can not be created or deleted via
SNMP.

Indexes

s5EnBStatSrcIndx

Column	Syntax	OID
s5EnBStatSrcIndx The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table.	S5-TCS-MIBSrcIndx Textual Convention: S5-TCS-MIBSrcIndx `Integer32` Type Constraints: `range: 1..999999`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.1`
s5EnBStatGoodOctets A count of octets contained in frames received which had no errors. This counter includes octets in unicast, broadcast, and multicast frames. This counter includes octets after the start frame delimiter u…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.2`
s5EnBStatGoodFrms A count of frames that are detected without errors. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. This counter includes unicast, broadcast, and multicast frames.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.3`
s5EnBStatBcastFrms A count of frames that are detected without errors and are directed to the broadcast group address. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors. Multicast frames are not i…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.4`
s5EnBStatMcastFrms A count of frames that are detected without errors and are directed to a non-broadcast group address. This does not include frames received with a frame-too-long, runt, FCS, or alignment errors.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.5`
s5EnBStatAlignErrors A count of frames detected that are not an integral number of octets in length and do not pass the FCS check. This counter is incremented when the frame is received with FramingError and FcsError and whose OctetCount is…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.6`
s5EnBStatFcsErrors A count of frames detected that are an integral number of octets in length that do not pass the FCS check. This counter is incremented when the frame is received with FcsError and NoFramingError and NoCollisions and who…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.7`
s5EnBStatRunts A count of frames detected that are less than the minimum permitted frame size and have a good FCS.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.8`
s5EnBStatTooLongFrms A count of frames detected that exceed the maximum permitted frame size. This counter is incremented when a frame received on this port whose OctetCount is greater than maxFramSize.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.9`
s5EnBStatFragments A count of fragments detected between 80-512 bits (64 bytes), inclusively, with invalid FCS. (These commonly represent collision fragments, and are not errors).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.10`
s5EnBStatVeryLongEvents A count of the times that MAU jabber lockup protection (MJLP) was detected due to transmission of data that exceeded 5 msec in duration(OctetCount greater than maxFramSize). This information can be useful in identifying…	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.11`
s5EnBStatColls A count of receive collisions detected.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.12`
s5EnBStatLateColls A count of late receive collisions detected. This counter is incremented for each event in which there is a receive Collision and ActivityDuration is greater than the LateEventThreshold.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.13`
s5EnBStatShortEvents A count of fragments detected with ActivityDuration less than ShortEventMaxTime. ShortEventMaxTime is greater than 74 bit times and less than 82 bit times.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.14`
s5EnBStatRateMismatches A count of the occurrences of out of spec bit rates. This indicates the number of times the FIFO buffer over-runs or under-runs due to transmission rate errors.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.15`
s5EnBStatBackOffFailures This counter is incremented by one for each frame received on this port with collision and port activity time greater than 552 to 560 bit time.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.16`
s5EnBStatAutoPartitions A count of the number of times that this port was automatically partitioned. The condition occurs when 32 consecutive collisions are detected on the port.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.17`
s5EnBStatShortIPGs A count of occurrences of a too short IPG (inter packet gap before a good packet) that were detected.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.18`
s5EnBStatNullFrames A count of the occurrences of frames received with no collision and whose octetCount is equal to 0 and activity time is greater than ValidPacketMinTime.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.1.1.19`

s5EnPStatTable

table

.1.3.6.1.4.1.45.1.6.6.2.2 · 1 row entry · 4 columns

Open in standard view

A table containing Ethernet port
extension statistics. This table extends
table s5EnBStatTable for ports. The entries
in the table may come only from port
sources. The number of entries is determined
by the number of sources that can provide the
information.

s5EnPStatEntry entry .1.3.6.1.4.1.45.1.6.6.2.2.1

A row in Ethernet port extension statistic table.
Entries can not be created or deleted via
SNMP.

Indexes

s5EnPStatSrcIndx

Column	Syntax	OID
s5EnPStatSrcIndx The index of the entry in the table. This index identifies the source of the information. Only those sources that provide these statistics are in this table.	S5-TCS-MIBSrcIndx Textual Convention: S5-TCS-MIBSrcIndx `Integer32` Type Constraints: `range: 1..999999`	`.1.3.6.1.4.1.45.1.6.6.2.2.1.1`
s5EnPStatSourceAddrChngs A count of changes in Last Source Address.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.2.1.2`
s5EnPStatLinkStatusChngs Contains a count of number of changes in link status from on(3) to off(2).	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.45.1.6.6.2.2.1.3`
s5EnPStatLastSourceAddr The Source Address of the last readable frame received by this port. If no frames have been received by this port since the agent began monitoring this port, the agent shall return a string of length zero.	OctetString Constraints: `range: 0-6`	`.1.3.6.1.4.1.45.1.6.6.2.2.1.4`

s5EnSStatTable

table

.1.3.6.1.4.1.45.1.6.6.2.3 · 1 row entry · 3 columns

Open in standard view

A table containing Ethernet Segment
extension statistics. This table extends
table s5EnBStatTable for segments. The
entries in the table may come from several
different data sources. The number
of entries is determined by the number
of sources that can provide the information.

s5EnSStatEntry entry .1.3.6.1.4.1.45.1.6.6.2.3.1

A row in Ethernet segment statistics table.
Entries can not be created or deleted via
SNMP.

Indexes

s5EnSStatSrcIndx

Column Syntax OID

s5EnSStatSrcIndx

The index of the entry in the table.
This index identifies the source of the
information. Only those sources that provide
these statistics are in this table.

S5-TCS-MIBSrcIndx

Textual Convention: S5-TCS-MIBSrcIndx Integer32

Type Constraints:
range: 1..999999

.1.3.6.1.4.1.45.1.6.6.2.3.1.1

s5EnSStatSegColls

A count of number of transmit collision
events(one per packet activity) for a
segment (i.e., local channel or backplane
network).

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.45.1.6.6.2.3.1.2

s5EnSStatSegRate

The segment speed type of this ethernet segment.
The following values are currently defined:
unknown (1) ------- unknown type
bps10m (2) ------- 10Mbps ethernet
bps100m (3) ------ 100Mbps ethernet

Enumeration

Enumerated Values:

1	unknown
2	bps10m
3	bps100m

.1.3.6.1.4.1.45.1.6.6.2.3.1.3