s5EnPortExtHwCapability
S5-ETHERNET-COMMON-MIB ·
.1.3.6.1.4.1.45.1.6.6.1.3.1.3
Object
column
OctetString
A bit array that contains the bit map
representing the hardware capabilites
of the port. The bit 7 tells if the port
supports auto-negotiation. If the auto negotiation
is on, the port will have multiple speed capabilities
while if the auto negotiation is not supported, the
hardware will only be capable for one speed:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full duplex capable
bit 2 - 100 BASE-TX half duplex capable
bit 3 - 100 BASE-TX full duplex capable
bit 5 - 100 BASE-FX full duplex capable
bit 6 - 100 BASE-FX half duplex capable
bit 7 - auto negotiation support capability
When auto negotiation is supported only bits 0-3
are used to indicate the capabilities available
for negotiation, and any or all of these bits may
be set as long as at least one bit is set.
When auto negotiation is NOT supported (bit 7 = 0)
all other bits are used to indicate the capabilities
supported by the port, but which must be manually
configured.
Context
- MIB
- S5-ETHERNET-COMMON-MIB
- OID
.1.3.6.1.4.1.45.1.6.6.1.3.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- s5EnPortExtEntry
- Table
- s5EnPortExtTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-1
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5EnPortExtBrdIndx The index of the board. This corresponds to
the index of the slot containing the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.3.1.1 |
| s5EnPortExtActiveSpeed The speed of the link. The possible
values are:
unknown(1)........unknown, no link
bps10M(2).........10 Mbit link
bps100M(3)........100 Mbit link | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.3.1.10 |
| s5EnPortExtCurDuplexMode The status of duplex mode. The possible
values are:
unknown(1)........unknown, no link
halfDuplex(2).........half duplex mode
fullDuplex(3)........full duplex mode | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.3.1.11 |
| s5EnPortExtIndx The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.3.1.2 |
| s5EnPortExtAutoNegAdv A bit array that contains the bit map
representing the abilities advertised
during link negociation. The bit 7 tells
if auto negotiation is enabled or disabled:
bit 0 - 10 BASE-… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.4 |
| s5EnPortExtAutoNegRcvd A bit array that contains the bit map
representing the auto-negotiation
abilities of the remote end of the link:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full dup… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.5 |
| s5EnPortExt10MbSegAttCfg The index for the segment used in case
a 10 Mbit link is established. | column | S5-TCS-MIBAttId | .1.3.6.1.4.1.45.1.6.6.1.3.1.6 |
| s5EnPortExt100MbSegAttCfg The index for the segment used in case
a 100 Mbit link is established. | column | S5-TCS-MIBAttId | .1.3.6.1.4.1.45.1.6.6.1.3.1.7 |
| s5EnPortExt10MbSegConnCapability A bit array that contains the bit map
representing all available 10Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the … | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.8 |
| s5EnPortExt100MbSegConnCapability A bit array that contains the bit map
representing all available 100Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.9 |