s5EnPortExt10MbSegAttCfg
S5-ETHERNET-COMMON-MIB ·
.1.3.6.1.4.1.45.1.6.6.1.3.1.6
Object
The index for the segment used in case a 10 Mbit link is established.
Context
- MIB
- S5-ETHERNET-COMMON-MIB
- OID
.1.3.6.1.4.1.45.1.6.6.1.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- s5EnPortExtEntry
- Table
- s5EnPortExtTable
- Siblings
- 10
Syntax
S5-TCS-MIBAttId
- Source
- S5-TCS-MIBAttId
- Base type
Integer32
Values & Constraints
Type Constraints
range: -255..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5EnPortExtBrdIndx The index of the board. This corresponds to
the index of the slot containing the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.3.1.1 |
| s5EnPortExtActiveSpeed The speed of the link. The possible
values are:
unknown(1)........unknown, no link
bps10M(2).........10 Mbit link
bps100M(3)........100 Mbit link | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.3.1.10 |
| s5EnPortExtCurDuplexMode The status of duplex mode. The possible
values are:
unknown(1)........unknown, no link
halfDuplex(2).........half duplex mode
fullDuplex(3)........full duplex mode | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.3.1.11 |
| s5EnPortExtIndx The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.3.1.2 |
| s5EnPortExtHwCapability A bit array that contains the bit map
representing the hardware capabilites
of the port. The bit 7 tells if the port
supports auto-negotiation. If the auto negotiation
is on, … | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.3 |
| s5EnPortExtAutoNegAdv A bit array that contains the bit map
representing the abilities advertised
during link negociation. The bit 7 tells
if auto negotiation is enabled or disabled:
bit 0 - 10 BASE-… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.4 |
| s5EnPortExtAutoNegRcvd A bit array that contains the bit map
representing the auto-negotiation
abilities of the remote end of the link:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full dup… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.5 |
| s5EnPortExt100MbSegAttCfg The index for the segment used in case
a 100 Mbit link is established. | column | S5-TCS-MIBAttId | .1.3.6.1.4.1.45.1.6.6.1.3.1.7 |
| s5EnPortExt10MbSegConnCapability A bit array that contains the bit map
representing all available 10Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the … | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.8 |
| s5EnPortExt100MbSegConnCapability A bit array that contains the bit map
representing all available 100Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.9 |