s5EnPortExt100MbSegConnCapability
S5-ETHERNET-COMMON-MIB ·
.1.3.6.1.4.1.45.1.6.6.1.3.1.9
Object
column
OctetString
A bit array that contains the bit map
representing all available 100Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the cluster has an isolate
capability.
The first 31 bits of the array represent
the backplane numbers, starting from the
lower order bit. Bit 32 indicates whether
the port has a null connection capability.
The bits in the fifth and sixth octets,
starting with bits in the lower order octet,
represent local segments that the port
can connect to.
A bit with a value of 1 means that the
port is capable of connecting to the
corresponding backplane segment, local segment
or null segment.
Context
- MIB
- S5-ETHERNET-COMMON-MIB
- OID
.1.3.6.1.4.1.45.1.6.6.1.3.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- s5EnPortExtEntry
- Table
- s5EnPortExtTable
- Siblings
- 10
Syntax
OctetString
Values & Constraints
Object Constraints
range: 8-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5EnPortExtBrdIndx The index of the board. This corresponds to
the index of the slot containing the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.3.1.1 |
| s5EnPortExtActiveSpeed The speed of the link. The possible
values are:
unknown(1)........unknown, no link
bps10M(2).........10 Mbit link
bps100M(3)........100 Mbit link | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.3.1.10 |
| s5EnPortExtCurDuplexMode The status of duplex mode. The possible
values are:
unknown(1)........unknown, no link
halfDuplex(2).........half duplex mode
fullDuplex(3)........full duplex mode | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.3.1.11 |
| s5EnPortExtIndx The index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.3.1.2 |
| s5EnPortExtHwCapability A bit array that contains the bit map
representing the hardware capabilites
of the port. The bit 7 tells if the port
supports auto-negotiation. If the auto negotiation
is on, … | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.3 |
| s5EnPortExtAutoNegAdv A bit array that contains the bit map
representing the abilities advertised
during link negociation. The bit 7 tells
if auto negotiation is enabled or disabled:
bit 0 - 10 BASE-… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.4 |
| s5EnPortExtAutoNegRcvd A bit array that contains the bit map
representing the auto-negotiation
abilities of the remote end of the link:
bit 0 - 10 BASE-T half duplex capable
bit 1 - 10 BASE-T full dup… | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.5 |
| s5EnPortExt10MbSegAttCfg The index for the segment used in case
a 10 Mbit link is established. | column | S5-TCS-MIBAttId | .1.3.6.1.4.1.45.1.6.6.1.3.1.6 |
| s5EnPortExt100MbSegAttCfg The index for the segment used in case
a 100 Mbit link is established. | column | S5-TCS-MIBAttId | .1.3.6.1.4.1.45.1.6.6.1.3.1.7 |
| s5EnPortExt10MbSegConnCapability A bit array that contains the bit map
representing all available 10Mbit backplane
segment and local segment connections for
the port. One bit is also reserved to
indicate if the … | column | OctetString | .1.3.6.1.4.1.45.1.6.6.1.3.1.8 |