S5-ETH-REDUNDANT-LINKS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
14
s5EnRedPortTable
table.1.3.6.1.4.1.45.1.6.6.1.2.1
·
1 row entry
·
14 columns
A table with redundancy status and control for
each redundancy-capable port in the chassis.
The number of entries is determined by the number
of redundancy-capable ports in the chassis.
The ports appearing in this table can be divided into
two categories:
Those with remote fault signaling capability and
those without. The latter kind depends on the port
link status to provide the required redundancy.
Ports that are not capable of supporting redundancy do
not have an entry in this table.
A row in the table of redundancy status and
control for each redundancy-capable port in the
chassis. Entries in the table cannot be
created or deleted via SNMP.
control for each redundancy-capable port in the
chassis. Entries in the table cannot be
created or deleted via SNMP.
Indexes
s5EnRedPortBrdIndx s5EnRedPortPortIndx
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
s5EnRedPortBrdIndx
The index of the slot containing the board on which
the port is located. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 |
||||||||||||||
|
s5EnRedPortPortIndx
The index of the port on the board.
|
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 |
||||||||||||||
|
s5EnRedPortCapability
The redundancy capability of the port:
hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndSwRed(3)....both hardware and software redundancy. A value of hwRedOnly(1) … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 |
||||||||||||||
|
s5EnRedPortRedundMode
The redundancy mode of the port.
The values when written change the redundancy mode, and when read report the redundancy mode: standalone(1)..the port is not in any redundant pair. hwActive(2)....the… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 |
||||||||||||||
|
s5EnRedPortOperStatus
The redundancy status of the port. The values are:
other(1).............none of the following. ok(2)...................no fault localFault(3)....the local port has sensed a fault condition. remoteFault(4)...the remote p… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 |
||||||||||||||
|
s5EnRedPortRemoteOperStatus
This object reflects the real time status of the
received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)....10BASE-FL signaling, plus capable of SynOptics proprietar… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 |
||||||||||||||
|
s5EnRedPortRemFltSelectMode
This mode specifies the set of local fault events
which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx Remote Fault events consist of auto-partition and NM (network … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 |
||||||||||||||
|
s5EnRedPortTxMode
The Transmit Fiber Mode, which determines the
port transmit idle. The values are: autoCfg(1)...The port will auto configure based upon the received idle. fl(2)........The port is configured in FL mode… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 |
||||||||||||||
|
s5EnRedPortFaults
A count of local or remote faults on this port. This
counter increments on a transition between the fault and no-fault states. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 |
||||||||||||||
|
s5EnRedPortModeChanges
A count of the number of times this port has transitioned
from standby mode to non-standby mode (includes active mode and standalone mode), or vice versa. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 |
||||||||||||||
|
s5EnRedPortCompanionBrdNum
The index of the slot containing the board of the
other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-redundant capable, this object has the valu… |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 |
||||||||||||||
|
s5EnRedPortCompanionPortNum
The index of the other port in the redundant pair.
If the port (whose slot-port identity is given by the instance) is hardware-redundant capable, this object has the value of the port number of the (poten… |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 |
||||||||||||||
|
s5EnRedPortSwitchoverStatus
The switchover status of the port (and its companion).
The following values can be written: timedSwitchover(2)...cause a timed switchover (see value of s5EnRedPortSwitcho… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 |
||||||||||||||
|
s5EnRedPortSwitchoverTime
The length of time between switching over a redundant
port pair and switching back, when a timed switchover is done to the port. This object can only be written in the same request that sets s5EnRedPortSwitchoverStatus … |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.14 |