s5EnRedPortEntry

S5-ETH-REDUNDANT-LINKS-MIB · .1.3.6.1.4.1.45.1.6.6.1.2.1.1

MIB view Table view

Object

row

A row in the table of redundancy status and
control for each redundancy-capable port in the
chassis. Entries in the table cannot be
created or deleted via SNMP.

Context

MIB: S5-ETH-REDUNDANT-LINKS-MIB
OID: .1.3.6.1.4.1.45.1.6.6.1.2.1.1
Type: row
Status: current
Parent: s5EnRedPortTable
Table: s5EnRedPortTable
Children: 14

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
s5EnRedPortBrdIndx The index of the slot containing the board on which the port is located.	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.1`
s5EnRedPortModeChanges A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standalone mode), or vice versa.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.10`
s5EnRedPortCompanionBrdNum The index of the slot containing the board of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-red…	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.11`
s5EnRedPortCompanionPortNum The index of the other port in the redundant pair. If the port (whose slot-port identity is given by the instance) is hardware-redundant capable, this object has th…	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.12`
s5EnRedPortSwitchoverStatus The switchover status of the port (and its companion). The following values can be written: timedSwitchover(2)...cause a timed switchover (see value of …	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.13`
s5EnRedPortSwitchoverTime The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. This object can only be written in the same reques…	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.14`
s5EnRedPortPortIndx The index of the port on the board.	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.2`
s5EnRedPortCapability The redundancy capability of the port: hwRedOnly(1).....hardware redundancy only. swRedOnly(2).....software redundacy only. hwAndSwRed(3)....both hardware and software redundancy.…	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.3`
s5EnRedPortRedundMode The redundancy mode of the port. The values when written change the redundancy mode, and when read report the redundancy mode: standalone(1)..the port is not in …	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.4`
s5EnRedPortOperStatus The redundancy status of the port. The values are: other(1).............none of the following. ok(2)...................no fault localFault(3)....the local port has sensed a fault …	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.5`
s5EnRedPortRemoteOperStatus This object reflects the real time status of the received data from the remote port. The values are: snpxFLRemFltCpblPortUp(1)....10BASE-FL signaling, …	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.6`
s5EnRedPortRemFltSelectMode This mode specifies the set of local fault events which will cause a switchover. The values are: synoptics(1)..The SynOptics Tx Remote Fault events consist of a…	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.7`
s5EnRedPortTxMode The Transmit Fiber Mode, which determines the port transmit idle. The values are: autoCfg(1)...The port will auto configure based upon the received idle. fl(2).…	column	Enumeration	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.8`
s5EnRedPortFaults A count of local or remote faults on this port. This counter increments on a transition between the fault and no-fault states.	column	SNMPv2-SMICounter32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.9`

Indexes

Object	Type	Syntax	OID
s5EnRedPortBrdIndx The index of the slot containing the board on which the port is located.	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.1`
s5EnRedPortPortIndx The index of the port on the board.	column	Integer32	`.1.3.6.1.4.1.45.1.6.6.1.2.1.1.2`