s5EnRedPortSwitchoverTime
S5-ETH-REDUNDANT-LINKS-MIB ·
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.14
Object
column
r/w
Integer32
The length of time between switching over a redundant port pair and switching back, when a timed switchover is done to the port. This object can only be written in the same request that sets s5EnRedPortSwitchoverStatus to timedSwitchover(2). Afterwards, it indicates the amount of time left before the timed switchover is completed, at which time another switchover occurs and s5EnRedSwitchoverStatus is changed to other(1). This object has the value of zero if the port is not undergoing a timed switchover, or if the amount of time is not available.
Context
- MIB
- S5-ETH-REDUNDANT-LINKS-MIB
- OID
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- s5EnRedPortEntry
- Table
- s5EnRedPortTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5EnRedPortBrdIndx The index of the slot containing the board on which
the port is located. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 |
| s5EnRedPortModeChanges A count of the number of times this port has transitioned
from standby mode to non-standby mode (includes active
mode and standalone mode), or vice versa. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.10 |
| s5EnRedPortCompanionBrdNum The index of the slot containing the board of the
other port in the redundant pair.
If the port (whose slot-port identity is given by
the instance) is hardware-red… | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 |
| s5EnRedPortCompanionPortNum The index of the other port in the redundant pair.
If the port (whose slot-port identity is given by
the instance) is hardware-redundant capable, this object
has th… | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 |
| s5EnRedPortSwitchoverStatus The switchover status of the port (and its companion).
The following values can be written:
timedSwitchover(2)...cause a timed switchover
(see value of
… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 |
| s5EnRedPortPortIndx The index of the port on the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 |
| s5EnRedPortCapability The redundancy capability of the port:
hwRedOnly(1).....hardware redundancy only.
swRedOnly(2).....software redundacy only.
hwAndSwRed(3)....both hardware and software redundancy.… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 |
| s5EnRedPortRedundMode The redundancy mode of the port.
The values when written change the redundancy
mode, and when read report the redundancy mode:
standalone(1)..the port is not in … | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 |
| s5EnRedPortOperStatus The redundancy status of the port. The values are:
other(1).............none of the following.
ok(2)...................no fault
localFault(3)....the local port has sensed a fault … | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 |
| s5EnRedPortRemoteOperStatus This object reflects the real time status of the
received data from the remote port. The values are:
snpxFLRemFltCpblPortUp(1)....10BASE-FL signaling,
… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 |
| s5EnRedPortRemFltSelectMode This mode specifies the set of local fault events
which will cause a switchover. The values are:
synoptics(1)..The SynOptics Tx Remote Fault events
consist of a… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 |
| s5EnRedPortTxMode The Transmit Fiber Mode, which determines the
port transmit idle. The values are:
autoCfg(1)...The port will auto configure based
upon the received idle.
fl(2).… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 |
| s5EnRedPortFaults A count of local or remote faults on this port. This
counter increments on a transition between the fault
and no-fault states. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 |