s5EnRedPortModeChanges
S5-ETH-REDUNDANT-LINKS-MIB ·
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.10
Object
column
SNMPv2-SMICounter32
A count of the number of times this port has transitioned from standby mode to non-standby mode (includes active mode and standalone mode), or vice versa.
Context
- MIB
- S5-ETH-REDUNDANT-LINKS-MIB
- OID
.1.3.6.1.4.1.45.1.6.6.1.2.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- s5EnRedPortEntry
- Table
- s5EnRedPortTable
- Siblings
- 13
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| s5EnRedPortBrdIndx The index of the slot containing the board on which
the port is located. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.1 |
| s5EnRedPortCompanionBrdNum The index of the slot containing the board of the
other port in the redundant pair.
If the port (whose slot-port identity is given by
the instance) is hardware-red… | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.11 |
| s5EnRedPortCompanionPortNum The index of the other port in the redundant pair.
If the port (whose slot-port identity is given by
the instance) is hardware-redundant capable, this object
has th… | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.12 |
| s5EnRedPortSwitchoverStatus The switchover status of the port (and its companion).
The following values can be written:
timedSwitchover(2)...cause a timed switchover
(see value of
… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.13 |
| s5EnRedPortSwitchoverTime The length of time between switching over a redundant
port pair and switching back, when a timed switchover
is done to the port. This object can only be written
in the same reques… | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.14 |
| s5EnRedPortPortIndx The index of the port on the board. | column | Integer32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.2 |
| s5EnRedPortCapability The redundancy capability of the port:
hwRedOnly(1).....hardware redundancy only.
swRedOnly(2).....software redundacy only.
hwAndSwRed(3)....both hardware and software redundancy.… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.3 |
| s5EnRedPortRedundMode The redundancy mode of the port.
The values when written change the redundancy
mode, and when read report the redundancy mode:
standalone(1)..the port is not in … | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.4 |
| s5EnRedPortOperStatus The redundancy status of the port. The values are:
other(1).............none of the following.
ok(2)...................no fault
localFault(3)....the local port has sensed a fault … | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.5 |
| s5EnRedPortRemoteOperStatus This object reflects the real time status of the
received data from the remote port. The values are:
snpxFLRemFltCpblPortUp(1)....10BASE-FL signaling,
… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.6 |
| s5EnRedPortRemFltSelectMode This mode specifies the set of local fault events
which will cause a switchover. The values are:
synoptics(1)..The SynOptics Tx Remote Fault events
consist of a… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.7 |
| s5EnRedPortTxMode The Transmit Fiber Mode, which determines the
port transmit idle. The values are:
autoCfg(1)...The port will auto configure based
upon the received idle.
fl(2).… | column | Enumeration | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.8 |
| s5EnRedPortFaults A count of local or remote faults on this port. This
counter increments on a transition between the fault
and no-fault states. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.45.1.6.6.1.2.1.1.9 |