QOS-POLICY-802-PIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
29

qos802DscpMappingTable

table
.1.3.6.1.4.1.45.4.3.1.1.1 · 1 row entry · 5 columns
Open in standard view 
Maps each DSCP to an QosIeee802Cos.  When configured 
for the first time, all 64 entries of the table must 
be specified. Thereafter, instances may be modified but 
not deleted unless all instances are deleted.
qos802DscpMappingEntry entry .1.3.6.1.4.1.45.4.3.1.1.1.1
An instance of the qos802DscpMapping class. A total of 64
class instances are constantly maintained after initial device
configuration.
Indexes
qos802DscpMappingId
Column Syntax OID
qos802DscpMappingId
A unique ID for this policy rule instance.
POLICY-FRAMEWORK-PIBPolicyInstanceId
Textual Convention: POLICY-FRAMEWORK-PIBPolicyInstanceId Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.45.4.3.1.1.1.1.1
qos802DscpMappingDscp
The DSCP class instance attribute that is used to
determine the appropriate Layer 2 CoS mappings. DSCP
values 0 through 63 (inclusive) are maintained in
the table.
QOS-POLICY-IP-PIBDscpr/w
Textual Convention: QOS-POLICY-IP-PIBDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.45.4.3.1.1.1.1.2
qos802DscpMapping802Cos
The IEEE 802 CoS value to use when mapping the DSCP
value specified by the qos802DscpMappingDscp attribute
to a IEEE 802 CoS.
QosIeee802Cosr/w
Textual Convention: QosIeee802Cos Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.45.4.3.1.1.1.1.3
qos802DscpMappingStorageType
The storage type for this conceptual row.

Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.

This object may not be modified if th…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.45.4.3.1.1.1.1.4
qos802DscpMappingStatus
The status of this row.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.45.4.3.1.1.1.1.5

qos802CosToDscpTable

table
.1.3.6.1.4.1.45.4.3.1.1.2 · 1 row entry · 5 columns
Open in standard view 
Maps each of eight Layer 2 CoS values to a DSCP.  When 
configured for the first time, all 8 entries of the table
must be specified. Thereafter, instances may be modified 
but not deleted unless all instances are deleted.
qos802CosToDscpEntry entry .1.3.6.1.4.1.45.4.3.1.1.2.1
An instance of the qosCosToDscp class. A total of 8
class instances are constantly maintained after initial
device configuration.
Indexes
qos802CosToDscpId
Column Syntax OID
qos802CosToDscpId
A unique ID for this policy rule instance.
POLICY-FRAMEWORK-PIBPolicyInstanceId
Textual Convention: POLICY-FRAMEWORK-PIBPolicyInstanceId Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.45.4.3.1.1.2.1.1
qos802CosToDscpCos
The Layer 2 CoS class instance attribute that is used to
determine the appropriate DSCP mappings. CoS values 0
through 7 (inclusive) are maintained in the table.
QosIeee802Cosr/w
Textual Convention: QosIeee802Cos Integer32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.45.4.3.1.1.2.1.2
qos802CosToDscpDscp
The DSCP value to use when mapping the Layer 2 CoS value
specified by the qosCosToDscp attribute to a DSCP.
QOS-POLICY-IP-PIBDscpr/w
Textual Convention: QOS-POLICY-IP-PIBDscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.45.4.3.1.1.2.1.3
qos802CosToDscpStorageType
The storage type for this conceptual row.

Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.

This object may not be modified if th…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.45.4.3.1.1.2.1.4
qos802CosToDscpStatus
The status of this row.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.45.4.3.1.1.2.1.5

qos802AceTable

table
.1.3.6.1.4.1.45.4.3.1.2.1 · 1 row entry · 12 columns
Open in standard view 
IEEE 802-based ACE definitions. A class that contains 
attributes of IEEE 802 (e.g., 802.3) traffic that form 
an association that is used to perform traffic 
classification.
qos802AceEntry entry .1.3.6.1.4.1.45.4.3.1.2.1.1
IEEE 802-based ACE definitions. An entry specifies
(potentially) several distinct matching components. Each
component is tested against the data in a frame
individually. An overall match occurs when all of the
indi…
Indexes
qos802AceId
Column Syntax OID
qos802AceId
An arbitrary integer index that uniquely identifies this
802 ACE among all of the 802 ACEs. Note that this identifier
is used in instances of the qos802Acl class to associate a
802 ACE with a 802 ACL. An active ACE/A…
POLICY-FRAMEWORK-PIBPolicyInstanceId
Textual Convention: POLICY-FRAMEWORK-PIBPolicyInstanceId Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.45.4.3.1.2.1.1.1
qos802AceDstAddr
The 802 address against which the 802 DA of incoming traffic
streams will be compared. Frames whose 802 DA matches the
physical address specified by this object, taking into account
address wildcarding as specified by t…
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.4.3.1.2.1.1.2
qos802AceDstAddrMask
This object specifies the bits in a 802 destination address
that should be considered when performing a 802 DA comparison
against the address specified in the qos802AceDstAddr object.

The value of this ob…
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.4.3.1.2.1.1.3
qos802AceSrcAddr
The 802 MAC address against which the 802 MAC SA of incoming
traffic streams will be compared. Frames whose 802 MAC SA
matches the physical address specified by this object,
taking into account address wildcarding as…
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.4.3.1.2.1.1.4
qos802AceSrcAddrMask
This object specifies the bits in a 802 MAC source address
that should be considered when performing a 802 MAC SA
comparison against the address specified in the
qos802AceSrcAddr object.

The value of th…
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.45.4.3.1.2.1.1.5
qos802AceVlanId
The VLAN ID (VID) that uniquely identifies a VLAN
within the device. This VLAN may be known or unknown
(i.e., traffic associated with this VID has not yet
been seen by the device) at the time this entry
is instantiated.…
Integer32r/w
Constraints:
range: -1--1
range: 1-4094
 .1.3.6.1.4.1.45.4.3.1.2.1.1.6
qos802AceVlanTagRequired
This object indicates whether the presence of an
IEEE 802.1Q VLAN tag in data link layer frames must
be considered when determining if a given frame
matches this 802 ACE entry.

A value of 'taggedOnly(1)'…
Enumerationr/w
Enumerated Values:
1taggedOnly
2priorityTagged
3untaggedOnly
4ignoreTag
 .1.3.6.1.4.1.45.4.3.1.2.1.1.7
qos802AceEtherType
This object specifies the value that will be compared
against the value contained in the EtherType field of an
IEEE 802 frame. Example settings would include 'IP'
(0x0800), 'ARP' (0x0806) and 'IPX' (0x8137).
…
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.45.4.3.1.2.1.1.8
qos802AceUserPriority
The set of values, representing the potential range
of user priority values, against which the value contained
in the user priority field of a tagged 802.1 frame is
compared. A test for equality is performed when determ…
Bitsr/w
Enumerated Values:
0matchPriority0
1matchPriority1
2matchPriority2
3matchPriority3
4matchPriority4
5matchPriority5
6matchPriority6
7matchPriority7
 .1.3.6.1.4.1.45.4.3.1.2.1.1.9
qos802AcePermit
If the frame matches this ACE and the value of this
attribute is true, then the matching process terminates
and the QoS associated with this 802-based ACE (indirectly
through the 802 ACL) is applied to the packet. If …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.45.4.3.1.2.1.1.10
qos802AceStorageType
The storage type for this conceptual row.

Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.

This object may not be modified if th…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.45.4.3.1.2.1.1.11
qos802AceStatus
The status of this row.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.45.4.3.1.2.1.1.12

qos802AclDefinitionTable

table
.1.3.6.1.4.1.45.4.3.1.2.2 · 1 row entry · 7 columns
Open in standard view 
IEEE 802-based ACL definitions. A class that defines a 
set of 802 ACLs, each of which is comprised of an ordered 
list of 802 ACEs.
qos802AclDefinitionEntry entry .1.3.6.1.4.1.45.4.3.1.2.2.1
IEEE 802-based ACL definitions. An entry specifies an
instance of this class that associates an 802 ACE with
a given 802 ACL. The evaluation order of distinct 802
ACEs that are associated with a specific 802 ACL is
…
Indexes
qos802AclDefinitionId
Column Syntax OID
qos802AclDefinitionId
An arbitrary integer index that uniquely identifies this
802 ACE / 802 ACL association.
POLICY-FRAMEWORK-PIBPolicyInstanceId
Textual Convention: POLICY-FRAMEWORK-PIBPolicyInstanceId Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.45.4.3.1.2.2.1.1
qos802AclDefinitionAclId
An index for this 802 ACL. Each 802 ACL in the device is
assigned a unique integer index. There will (potentially) be
multiple instances of the qos802AclDefinition class with this
identifier, one for each 802 ACE that…
POLICY-FRAMEWORK-PIBPolicyInstanceIdr/w
Textual Convention: POLICY-FRAMEWORK-PIBPolicyInstanceId Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.45.4.3.1.2.2.1.2
qos802AclDefinitionAceId
This attribute identifies the 802 ACE in the qos802AceTable
that is associated with the 802 ACL specified by
qos802AclDefinitionAclId object. The corresponding instance
in the qos802Ace class must exist prior to bein…
POLICY-FRAMEWORK-PIBPolicyInstanceIdr/w
Textual Convention: POLICY-FRAMEWORK-PIBPolicyInstanceId Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.45.4.3.1.2.2.1.3
qos802AclDefinitionAceOrder
The precedence of the 802 ACE, identified via the
qos802AclDefinitionAceId object, with regard to evaluation
order. The precedence determines the order of evaluation of
this ACE in relation to related 802 ACEs that a…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.45.4.3.1.2.2.1.4
qos802AclDefinitionStorageType
The storage type for this conceptual row.

Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.

This object may not be modified if th…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.45.4.3.1.2.2.1.5
qos802AclDefinitionStatus
The status of this row.

An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.45.4.3.1.2.2.1.6
qos802AclDefinitionLabel
A label used to reference the filter group in a textual
manner. All members of the same group, as determined by
the value of the qos802AclDefinitionAclId attribute,
must have the same label.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.45.4.3.1.2.2.1.7