qos802AceVlanTagRequired

Object

column r/w Enumeration

This object indicates whether the presence of an
IEEE 802.1Q VLAN tag in data link layer frames must
be considered when determining if a given frame
matches this 802 ACE entry. 
              
A value of 'taggedOnly(1)' means that only frames 
containing a VLAN tag with a non-Null VID (i.e., a 
VID in the range 1..4094) will be considered a match. 
              
A value of 'priorityTaggedPlus(2)' means that only 
frames containing a VLAN tag, regardless of the value 
of the VID, will be considered a match.
              
A value of 'untaggedOnly(3)' indicates that only 
untagged frames will match this filter component. 
              
The presence of a VLAN tag is not taken into 
consideration in terms of a match if the value is 
'ignoreTag(4)'.

Context

MIB: QOS-POLICY-802-PIB
OID: .1.3.6.1.4.1.45.4.3.1.2.1.1.7
Type: column
Access: readwrite
Status: current
Parent: qos802AceEntry
Table: qos802AceTable
Siblings: 11

Related Objects

Sibling Objects

Object	Type	Syntax	OID
qos802AceId An arbitrary integer index that uniquely identifies this 802 ACE among all of the 802 ACEs. Note that this identifier is used in instances of the qos802Acl class to associate a …	column	POLICY-FRAMEWORK-PIBPolicyInstanceId	`.1.3.6.1.4.1.45.4.3.1.2.1.1.1`
qos802AcePermit If the frame matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this 802-based ACE (indirectly through the…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.4.3.1.2.1.1.10`
qos802AceStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. …	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.45.4.3.1.2.1.1.11`
qos802AceStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.45.4.3.1.2.1.1.12`
qos802AceDstAddr The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into accou…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.2`
qos802AceDstAddrMask This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the qos802AceDstAddr obj…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.3`
qos802AceSrcAddr The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, ta…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.4`
qos802AceSrcAddrMask This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the qos802AceSrcAdd…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.5`
qos802AceVlanId The VLAN ID (VID) that uniquely identifies a VLAN within the device. This VLAN may be known or unknown (i.e., traffic associated with this VID has not yet been seen by the device)…	column	Integer32	`.1.3.6.1.4.1.45.4.3.1.2.1.1.6`
qos802AceEtherType This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP…	column	Integer32	`.1.3.6.1.4.1.45.4.3.1.2.1.1.8`
qos802AceUserPriority The set of values, representing the potential range of user priority values, against which the value contained in the user priority field of a tagged 802.1 frame is compared. A te…	column	Bits	`.1.3.6.1.4.1.45.4.3.1.2.1.1.9`

`1`	taggedOnly
`2`	priorityTagged
`3`	untaggedOnly
`4`	ignoreTag

Object

Context

Syntax

Values & Constraints

Related Objects