qos802AceEtherType

Object

column r/w Integer32

This object specifies the value that will be compared
against the value contained in the EtherType field of an 
IEEE 802 frame. Example settings would include 'IP' 
(0x0800), 'ARP' (0x0806) and 'IPX' (0x8137). 
              
Setting the qos802AceEtherType object to -1 indicates 
that EtherType data should not be considered during traffic 
classification. 
              
Note that the position of the EtherType field depends on
the underlying frame format. For Ethernet-II encapsulation,
the EtherType field follows the 802 MAC source address. For
802.2 LLC/SNAP encapsulation, the EtherType value follows the
Organization Code field in the 802.2 SNAP header. The value
that is tested with regard to this filter component therefore
depends on the data link layer frame format being used. If
this 802 ACE component is active when there is no EtherType
field in a frame (e.g., 802.2 LLC), a match is implied.

Context

MIB: QOS-POLICY-802-PIB
OID: .1.3.6.1.4.1.45.4.3.1.2.1.1.8
Type: column
Access: readwrite
Status: current
Parent: qos802AceEntry
Table: qos802AceTable
Siblings: 11

Related Objects

Sibling Objects

Object	Type	Syntax	OID
qos802AceId An arbitrary integer index that uniquely identifies this 802 ACE among all of the 802 ACEs. Note that this identifier is used in instances of the qos802Acl class to associate a …	column	POLICY-FRAMEWORK-PIBPolicyInstanceId	`.1.3.6.1.4.1.45.4.3.1.2.1.1.1`
qos802AcePermit If the frame matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this 802-based ACE (indirectly through the…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.4.3.1.2.1.1.10`
qos802AceStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. …	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.45.4.3.1.2.1.1.11`
qos802AceStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.45.4.3.1.2.1.1.12`
qos802AceDstAddr The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into accou…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.2`
qos802AceDstAddrMask This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the qos802AceDstAddr obj…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.3`
qos802AceSrcAddr The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, ta…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.4`
qos802AceSrcAddrMask This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the qos802AceSrcAdd…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.5`
qos802AceVlanId The VLAN ID (VID) that uniquely identifies a VLAN within the device. This VLAN may be known or unknown (i.e., traffic associated with this VID has not yet been seen by the device)…	column	Integer32	`.1.3.6.1.4.1.45.4.3.1.2.1.1.6`
qos802AceVlanTagRequired This object indicates whether the presence of an IEEE 802.1Q VLAN tag in data link layer frames must be considered when determining if a given frame matches this 802 ACE entry. …	column	Enumeration	`.1.3.6.1.4.1.45.4.3.1.2.1.1.7`
qos802AceUserPriority The set of values, representing the potential range of user priority values, against which the value contained in the user priority field of a tagged 802.1 frame is compared. A te…	column	Bits	`.1.3.6.1.4.1.45.4.3.1.2.1.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects