qos802AceUserPriority – QOS-POLICY-802-PIB

Object

column r/w Bits

The set of values, representing the potential range
of user priority values, against which the value contained
in the user priority field of a tagged 802.1 frame is
compared. A test for equality is performed when determining
if a match exists between the data in a data link layer
frame and the value of this 802 ACE component. Multiple
values may be set at one time such that potentially several
different user priority values may match this 802 ACE
component.
              
Setting all of the bits that are associated with this
object causes all user priority values to match this
attribute. This essentially makes any comparisons
with regard to user priority values unnecessary. Untagged
frames are treated as an implicit match.

Context

MIB: QOS-POLICY-802-PIB
OID: .1.3.6.1.4.1.45.4.3.1.2.1.1.9
Type: column
Access: readwrite
Status: current
Parent: qos802AceEntry
Table: qos802AceTable
Siblings: 11

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	matchPriority0
`1`	matchPriority1
`2`	matchPriority2
`3`	matchPriority3
`4`	matchPriority4
`5`	matchPriority5
`6`	matchPriority6
`7`	matchPriority7

Related Objects

Sibling Objects

Object	Type	Syntax	OID
qos802AceId An arbitrary integer index that uniquely identifies this 802 ACE among all of the 802 ACEs. Note that this identifier is used in instances of the qos802Acl class to associate a …	column	POLICY-FRAMEWORK-PIBPolicyInstanceId	`.1.3.6.1.4.1.45.4.3.1.2.1.1.1`
qos802AcePermit If the frame matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this 802-based ACE (indirectly through the…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.45.4.3.1.2.1.1.10`
qos802AceStorageType The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. …	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.45.4.3.1.2.1.1.11`
qos802AceStatus The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default values…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.45.4.3.1.2.1.1.12`
qos802AceDstAddr The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this object, taking into accou…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.2`
qos802AceDstAddrMask This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the qos802AceDstAddr obj…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.3`
qos802AceSrcAddr The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified by this object, ta…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.4`
qos802AceSrcAddrMask This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in the qos802AceSrcAdd…	column	SNMPv2-TCPhysAddress	`.1.3.6.1.4.1.45.4.3.1.2.1.1.5`
qos802AceVlanId The VLAN ID (VID) that uniquely identifies a VLAN within the device. This VLAN may be known or unknown (i.e., traffic associated with this VID has not yet been seen by the device)…	column	Integer32	`.1.3.6.1.4.1.45.4.3.1.2.1.1.6`
qos802AceVlanTagRequired This object indicates whether the presence of an IEEE 802.1Q VLAN tag in data link layer frames must be considered when determining if a given frame matches this 802 ACE entry. …	column	Enumeration	`.1.3.6.1.4.1.45.4.3.1.2.1.1.7`
qos802AceEtherType This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include 'IP' (0x0800), 'ARP…	column	Integer32	`.1.3.6.1.4.1.45.4.3.1.2.1.1.8`