qos802AceDstAddrMask
QOS-POLICY-802-PIB ·
.1.3.6.1.4.1.45.4.3.1.2.1.1.3
Object
This object specifies the bits in a 802 destination address
that should be considered when performing a 802 DA comparison
against the address specified in the qos802AceDstAddr object.
The value of this object represents a mask that is logically
and'ed with the 802 DA in received frames to derive the value
to be compared against the qos802AceDstAddr address. A zero
bit in the mask thus means that the corresponding bit in the
address always matches. The qos802AceDstAddr value must also
be masked using this value prior to any comparisons.
The length of this object in octets must equal the length in
octets of the qos802AceDstAddr. Note that a mask with no bits
set (i.e., all zeroes) effectively wildcards the
qos802AceDstAddr object.
Context
- MIB
- QOS-POLICY-802-PIB
- OID
.1.3.6.1.4.1.45.4.3.1.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- qos802AceEntry
- Table
- qos802AceTable
- Siblings
- 11
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| qos802AceId An arbitrary integer index that uniquely identifies this
802 ACE among all of the 802 ACEs. Note that this identifier
is used in instances of the qos802Acl class to associate a … | column | POLICY-FRAMEWORK-PIBPolicyInstanceId | .1.3.6.1.4.1.45.4.3.1.2.1.1.1 |
| qos802AcePermit If the frame matches this ACE and the value of this
attribute is true, then the matching process terminates
and the QoS associated with this 802-based ACE (indirectly
through the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.45.4.3.1.2.1.1.10 |
| qos802AceStorageType The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.45.4.3.1.2.1.1.11 |
| qos802AceStatus The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.45.4.3.1.2.1.1.12 |
| qos802AceDstAddr The 802 address against which the 802 DA of incoming traffic
streams will be compared. Frames whose 802 DA matches the
physical address specified by this object, taking into accou… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.45.4.3.1.2.1.1.2 |
| qos802AceSrcAddr The 802 MAC address against which the 802 MAC SA of incoming
traffic streams will be compared. Frames whose 802 MAC SA
matches the physical address specified by this object,
ta… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.45.4.3.1.2.1.1.4 |
| qos802AceSrcAddrMask This object specifies the bits in a 802 MAC source address
that should be considered when performing a 802 MAC SA
comparison against the address specified in the
qos802AceSrcAdd… | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.45.4.3.1.2.1.1.5 |
| qos802AceVlanId The VLAN ID (VID) that uniquely identifies a VLAN
within the device. This VLAN may be known or unknown
(i.e., traffic associated with this VID has not yet
been seen by the device)… | column | Integer32 | .1.3.6.1.4.1.45.4.3.1.2.1.1.6 |
| qos802AceVlanTagRequired This object indicates whether the presence of an
IEEE 802.1Q VLAN tag in data link layer frames must
be considered when determining if a given frame
matches this 802 ACE entry.
… | column | Enumeration | .1.3.6.1.4.1.45.4.3.1.2.1.1.7 |
| qos802AceEtherType This object specifies the value that will be compared
against the value contained in the EtherType field of an
IEEE 802 frame. Example settings would include 'IP'
(0x0800), 'ARP… | column | Integer32 | .1.3.6.1.4.1.45.4.3.1.2.1.1.8 |
| qos802AceUserPriority The set of values, representing the potential range
of user priority values, against which the value contained
in the user priority field of a tagged 802.1 frame is
compared. A te… | column | Bits | .1.3.6.1.4.1.45.4.3.1.2.1.1.9 |