PoE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
26

swPoESystemStackingCtrlTable

table
.1.3.6.1.4.1.171.12.24.1.11 · 1 row entry · 6 columns
Open in standard view 
A table that is used to configure PoE system information based on Unit ID.
The Unit ID is used for stacking.
swPoESystemStackingCtrlEntry entry .1.3.6.1.4.1.171.12.24.1.11.1
A list of PoE system information based on Unit ID.
Indexes
swPoESystemStackingCtrlUnitId
Column Syntax OID
swPoESystemStackingCtrlUnitId
This object indicates the device's Unit ID.
A unit ID of zero denotes a stand-alone device.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.24.1.11.1.1
swPoESystemStackingCtrlPowerLimit
The power budget (in watts) of the PoE sytem.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.1.11.1.2
swPoESystemStackingCtrlPowerDisconnectMethod
The power management disconnection method. When the total consumed power
exceeds the power budget, the PoE controller initiates port disconnection
to prevent overloading the power supply. The controller uses one of the
…
Enumerationr/w
Enumerated Values:
1denyNextPort
2denyLowPriorityPort
 .1.3.6.1.4.1.171.12.24.1.11.1.3
swPoESystemStackingCtrlManagementMode
This mode can be either power_limit mode or auto mode.
power_limit: If power supplied to the port exceeds the power limit
specified for it, this port will be shut down.
auto: The system will automatically determine the …
Enumerationr/w
Enumerated Values:
1power-limit
2auto
 .1.3.6.1.4.1.171.12.24.1.11.1.4
swPoESystemStackingCtrlLedMode
Specifies the system mode to be POE or NORMAL.
Enumerationr/w
Enumerated Values:
1normal
2poe
 .1.3.6.1.4.1.171.12.24.1.11.1.5
swPoESystemStackingCtrlLegacyPD
The legacy PD detection state. Enables or disables legacy PD detection on PoE unit.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.24.1.11.1.6

swPoESystemInfoTable

table
.1.3.6.1.4.1.171.12.24.2.1 · 1 row entry · 7 columns
Open in standard view 
A table that contains PoE system information based on Unit ID.
The Unit ID is used for stacking.
swPoESystemInfoEntry entry .1.3.6.1.4.1.171.12.24.2.1.1
A list of PoE system information based on Unit ID.
Indexes
swPoESystemInfoUnitId
Column Syntax OID
swPoESystemInfoUnitId
This object indicates the device's Unit ID.
A unit ID of zero denotes a stand-alone device.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.24.2.1.1.1
swPoESystemInfoPowerConsumption
The actual momentary power consumption (in watts) in the PoE system.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.2.1.1.2
swPoESystemInfoPowerRemained
The actual momentary remaining power (in watts) in the PoE system.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.2.1.1.3
swPoESystemInfoPowerLimit
The power budget (in watts) of the PoE sytem.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.2.1.1.4
swPoESystemInfoPowerDisconnectMethod
The power management disconnection method. When the total consumed power
exceeds the power budget, the PoE controller initiates port disconnection
to prevent overloading the power supply. The controller uses one of the
…
Enumeration
Enumerated Values:
1denyNextPort
2denyLowPriorityPort
 .1.3.6.1.4.1.171.12.24.2.1.1.5
swPoESystemInfoManagementMode
This mode can be either power_limit mode or auto mode.
power_limit: If power supplied to the port exceeds the power limit
specified for it, this port will be shut down.
auto: The system will automatically determine the…
Enumeration
Enumerated Values:
1power-limit
2auto
 .1.3.6.1.4.1.171.12.24.2.1.1.6
swPoESystemInfoLegacyPD
The current status of legacy PD detection.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.24.2.1.1.7

swPoEPortCtrlTable

table
.1.3.6.1.4.1.171.12.24.3.1 · 1 row entry · 6 columns
Open in standard view 
A table that contains PoE configuration about every port in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device;
N+1 -- 2N describe the port number of BoxId 2 device;
2N+1 -- 3N describe the port number of BoxId 2 device;
......
swPoEPortCtrlEntry entry .1.3.6.1.4.1.171.12.24.3.1.1
A list of PoE configurations for each port of the device in this stack.
Indexes
swPoEPortCtrlPortIndex
Column Syntax OID
swPoEPortCtrlPortIndex
This object indicates the devices' port number in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device;
N+1 -- 2N describe the port number of BoxId 2 device;
2N+1 -- 3N d…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.24.3.1.1.1
swPoEPortCtrlState
The PoE port state. Enables or disables the PoE function on the specific port.
The default setting is enable.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.171.12.24.3.1.1.2
swPoEPortCtrlPriority
The PoE port priority. Port priority affects power-up order (after a
rest, the ports are powered up according to their priority) and shutdown
order (when exceeding the power budget, the ports are shut down according
to …
Enumerationr/w
Enumerated Values:
1critical
2high
3low
 .1.3.6.1.4.1.171.12.24.3.1.1.3
swPoEPortCtrlPowerLimit
There are 4 pre-defined values for users' convenience to set the upper
power limit for class 0, class 1, class 2, and class 3.
class_0: 15400mW (The maximum power provided by PSE (switch) is 12.95 W + power loss on cabl…
Enumerationr/w
Enumerated Values:
1class0
2class1
3class2
4class3
5user-defined
 .1.3.6.1.4.1.171.12.24.3.1.1.4
swPoEPortCtrlUserDefined
User defined per-port power limit (in milliwatts). If a port exceeds 10% of its power
limit, the PoE system will shut down that port. The default setting is 15400 mW.
Note: This object is valid only while the swPoEPortC…
Integer32r/w
Constraints:
range: 1000-35000
 .1.3.6.1.4.1.171.12.24.3.1.1.5
swPoEPortCtrlTimeRangeName
Specifies the time_range that applies to the port of the POE.If time range is configured,
power can only be supplied during the period specified by the time range.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.12.24.3.1.1.6

swPoEPortInfoTable

table
.1.3.6.1.4.1.171.12.24.4.1 · 1 row entry · 7 columns
Open in standard view 
A table that contains PoE information about every port in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxID 1 device;
N+1 -- 2N describe the port number of BoxID 2 device;
2N+1 -- 3N describe the port number of BoxID 2 device;
......
swPoEPortInfoEntry entry .1.3.6.1.4.1.171.12.24.4.1.1
A list of PoE information for each port of the device in this stack.
Indexes
swPoEPortInfoPortIndex
Column Syntax OID
swPoEPortInfoPortIndex
This object indicates the devices' port number in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device;
N+1 -- 2N describe the port number of BoxID 2 device;
2N+1 -- 3N d…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.24.4.1.1.1
swPoEPortInfoClass
The power class of the PD according to 802.3af definitions:
class 0: PD power consumption is within 0.44-12.95 watts,
class 1: PD power consumption is within 0.44-3.84 watts,
class 2: PD power consumption is within 3.84…
Integer32
Constraints:
range: 0-4
 .1.3.6.1.4.1.171.12.24.4.1.1.2
swPoEPortInfoPower
The port power consumption (in milliwatts).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.4.1.1.3
swPoEPortInfoVoltage
The port input line voltage (in decivolts).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.4.1.1.4
swPoEPortInfoCurrent
The port current (calculated in milliamps).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.24.4.1.1.5
swPoEPortInfoStatus
The string describes the PoE port current status.
OctetString
Constraints:
range: 0-76
 .1.3.6.1.4.1.171.12.24.4.1.1.6
swpoEPortInfoLedStatus
The LED display for PoE port status.
on (1): power is provided to the port on which a 802.3af-compliant
or legacy PD is connected,
off(2): no power is provided to the port where there aren't any errors,
error(…
Enumeration
Enumerated Values:
1on
2off
3error
 .1.3.6.1.4.1.171.12.24.4.1.1.7