swPoEPortCtrlPowerLimit
PoE-MIB ·
.1.3.6.1.4.1.171.12.24.3.1.1.4
Object
column
r/w
Enumeration
There are 4 pre-defined values for users' convenience to set the upper power limit for class 0, class 1, class 2, and class 3. class_0: 15400mW (The maximum power provided by PSE (switch) is 12.95 W + power loss on cable) class_1: 4000mW (The maximum power provided by PSE is 3.84 W + power loss on cable) class_2: 7000mW (The maximum power provided by PSE is 6.49 W + power loss on cable) class_3: 15400mW (The maximum power provided by PSE is 12.95 W + power loss on cable) user-defined: User can select this setting and configure the range in swPoEPortCtrlUserDefined.
Context
- MIB
- PoE-MIB
- OID
.1.3.6.1.4.1.171.12.24.3.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swPoEPortCtrlEntry
- Table
- swPoEPortCtrlTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | class0 |
2 | class1 |
3 | class2 |
4 | class3 |
5 | user-defined |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swPoEPortCtrlPortIndex This object indicates the devices' port number in this stack.
If a device has N ports, then the 1 -- N ports describe the port number of BoxId 1 device;
N+1 -- 2N describe the por… | column | Integer32 | .1.3.6.1.4.1.171.12.24.3.1.1.1 |
| swPoEPortCtrlState The PoE port state. Enables or disables the PoE function on the specific port.
The default setting is enable. | column | Enumeration | .1.3.6.1.4.1.171.12.24.3.1.1.2 |
| swPoEPortCtrlPriority The PoE port priority. Port priority affects power-up order (after a
rest, the ports are powered up according to their priority) and shutdown
order (when exceeding the power budge… | column | Enumeration | .1.3.6.1.4.1.171.12.24.3.1.1.3 |
| swPoEPortCtrlUserDefined User defined per-port power limit (in milliwatts). If a port exceeds 10% of its power
limit, the PoE system will shut down that port. The default setting is 15400 mW.
Note: This o… | column | Integer32 | .1.3.6.1.4.1.171.12.24.3.1.1.5 |
| swPoEPortCtrlTimeRangeName Specifies the time_range that applies to the port of the POE.If time range is configured,
power can only be supplied during the period specified by the time range. | column | OctetString | .1.3.6.1.4.1.171.12.24.3.1.1.6 |