swPoESystemStackingCtrlPowerDisconnectMethod

PoE-MIB · .1.3.6.1.4.1.171.12.24.1.11.1.3

Object

column r/w Enumeration

The power management disconnection method. When the total consumed power
exceeds the power budget, the PoE controller initiates port disconnection
to prevent overloading the power supply. The controller uses one of the
following two ways to implement the disconnection.
deny_next_port:
after the power budget has been exceeded, the next port
attempting to power up is denied, regardless of its priority.
deny_low_priority_port:
after the power budget has been exceeded, the next
port attempting to power up causes the port with the lowest priority to
shut down to allow high-priority ports to power up.
The default setting is deny_next_port.

Context

MIB: PoE-MIB
OID: .1.3.6.1.4.1.171.12.24.1.11.1.3
Type: column
Access: readwrite
Status: current
Parent: swPoESystemStackingCtrlEntry
Table: swPoESystemStackingCtrlTable
Siblings: 5

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	denyNextPort
`2`	denyLowPriorityPort

Related Objects

Sibling Objects

Object	Type	Syntax	OID
swPoESystemStackingCtrlUnitId This object indicates the device's Unit ID. A unit ID of zero denotes a stand-alone device.	column	Integer32	`.1.3.6.1.4.1.171.12.24.1.11.1.1`
swPoESystemStackingCtrlPowerLimit The power budget (in watts) of the PoE sytem.	column	Integer32	`.1.3.6.1.4.1.171.12.24.1.11.1.2`
swPoESystemStackingCtrlManagementMode This mode can be either power_limit mode or auto mode. power_limit: If power supplied to the port exceeds the power limit specified for it, this port will be shut down. auto: The …	column	Enumeration	`.1.3.6.1.4.1.171.12.24.1.11.1.4`
swPoESystemStackingCtrlLedMode Specifies the system mode to be POE or NORMAL.	column	Enumeration	`.1.3.6.1.4.1.171.12.24.1.11.1.5`
swPoESystemStackingCtrlLegacyPD The legacy PD detection state. Enables or disables legacy PD detection on PoE unit.	column	Enumeration	`.1.3.6.1.4.1.171.12.24.1.11.1.6`