IPI-CMM-COHERENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
17
Rows
17
Columns
205

cmmCoherentModuleTable

table
.1.3.6.1.4.1.36673.100.1.15.1.1 · 1 row entry · 18 columns
Open in standard view 
A list of entries containing information
for each Optical module state.
cmmCoherentModuleEntry entry .1.3.6.1.4.1.36673.100.1.15.1.1.1
A list of entries containing information
for each optical module state.
Indexes
cmmSlotIndex
Column Syntax OID
cmmSlotIndex
The optical slot identifier.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.1
cmmModulePresence
Cage presence in optical module interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1present
2notpresent
3unknown
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.2
cmmModuleType
Module Type.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0unknown
1dco
2aco
3non-coherent
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.3
cmmOperAdminStatus
Admin operational status of the optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.4
cmmOperationalStatus
Operational status of the optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1initialize
2ready
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.5
cmmOpticalVendorName
Optical module Vendor name.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.6
cmmOpticalVendorSerialnum
The optical module vendor serial number.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.7
cmmOpticalVendorFirmwarenumber
Vendor Firmware Version.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.8
cmmNumNetworkInterfaces
Number of optical channel interfaces.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.9
cmmNumHostInterfaces
Number of ethernet non-optical ports supported for the optical
interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.10
cmmCfpTransPresence
To verify cfp transceiver presence
Enumeration
Enumerated Values:
1present
2not-present
3unknown
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.11
cmmCfpVendorName
CFP Vendor Name.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.12
cmmCfpVendorOui
CFP Vendor Oui in Hex format.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.13
cmmCfpVendorPartNum
The optical module CFP vendor part number.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.14
cmmCfpVendorSerialNum
CFP Vendor Serial Number.
'-100001' indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.15
cmmCfpFirmwareVersion
CFP Vendor Firmware Version.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.16
cmmModuleTemp
Internally measured temperature.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.17
cmmModuleVolt
Internally measured transceiver supply voltage
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.1.1.18

cmmCoherentModuleFAWSTable

table
.1.3.6.1.4.1.36673.100.1.15.1.2 · 1 row entry · 4 columns
Open in standard view 
A optical elated
objects for a particular port..
cmmCoherentModuleFAWSEntry entry .1.3.6.1.4.1.36673.100.1.15.1.2.1
A optical entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex
Column Syntax OID
cmmModuleTemperature
Module Temperature alarm.
Enumeration
Enumerated Values:
1temperature-low-alarm
2temperature-low-warning
3temperature-high-warning
4temperature-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.1
cmmModuleVoltage
Module voltage alarm.
Enumeration
Enumerated Values:
1voltage-low-alarm
2voltage-low-warning
3voltage-high-warning
4voltage-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.2
cmmModuleGeneralStatus
Module General Status alarm. Empty String indicates unavailable.
Zeros Indicates No Alarms.
ModuleGeneralStatusCode
Textual Convention: ModuleGeneralStatusCode Bits
Type Values:
0hw-interlock
1tx-loss-Of-signal-functionality
2rx-loss-Of-signal
3rx-network-loss-of-lock
4tx-host-loss-of-lock
5hostlane-out-of-alignment
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.3
cmmModuleFaultStatus
Module Fault Status alarm. Empty String indicates unavailable.
Zeros Indicates No Alarms.
ModuleFaultStatusCode
Textual Convention: ModuleFaultStatusCode Bits
Type Values:
0over-temperature-fault
1hardware-fault
2initialization-fault
3power-supply-fault
4checksum-fault
 .1.3.6.1.4.1.36673.100.1.15.1.2.1.4

cmmCoherentModuleMonitorTable

table
.1.3.6.1.4.1.36673.100.1.15.1.3 · 1 row entry · 8 columns
Open in standard view 
A optical elated
objects for a particular port..
cmmCoherentModuleMonitorEntry entry .1.3.6.1.4.1.36673.100.1.15.1.3.1
A optical entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex
Column Syntax OID
cmmModuleTempHighAlarmThreshold
Module Temperature High Alarm threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.1
cmmModuleTempHighWarnThreshold
Module Temperature High Warn Threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.2
cmmModuleTempLowWarnThreshold
Module Temperature Low Warn Threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.3
cmmModuleTempLowAlarmhreshold
Module Temperature Low Alarm threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 CInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.4
cmmModuleVoltHighAlarmThreshold
Module Voltage High Alarm threshold in V.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.5
cmmModuleVoltHighWarnThreshold
Module Voltage High Warn Threshold in v.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.6
cmmModuleVoltLowWarnThreshold
Module Voltage Low Warn Threshold in V.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.7
cmmModuleVoltlowAlarmThreshold
Module Volatge Low Alarm threshold in C.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.001 VInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.3.1.8

cmmCoherentModuleConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.1.4 · 1 row entry · 5 columns
Open in standard view 
A list of entries containing Configuration information
for each Optical module.
cmmCoherentModuleConfigTableEntry entry .1.3.6.1.4.1.36673.100.1.15.1.4.1
A list of entries containing Configuration information
for each optical module.
Indexes
cmmSlotIndex
Column Syntax OID
cmmAdminStatus
Admin operational status of the optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.1
cmmModuleServiceStatus
To enable service for the optical controller module.
Enumeration
Enumerated Values:
0inactive
1active
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.2
cmmSlotDescription
Specifies Coherent Optics slot Description.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.3
cmmAllNetifLoopBack
All the network interfaces loopback-type of the optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.4
cmmAllHostifLoopBack
All the host interfaces loopback-type of the optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.1.4.1.5

cmmCoherentModuleEventCountTable

table
.1.3.6.1.4.1.36673.100.1.15.1.5 · 1 row entry · 19 columns
Open in standard view 
Event count information for each Optical module.
cmmCoherentModuleEventCountEntry entry .1.3.6.1.4.1.36673.100.1.15.1.5.1
A list of entries containing Coherent Module event count information.
Indexes
cmmSlotIndex
Column Syntax OID
cmmHwInterlockEC
Module General Fault hardware interlock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.1
cmmTXLossofSignalFunctionalityEC
Module General Fault tx loss of signal functionality
event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.2
cmmRXLossofSignalEC
Module General Fault rx loss of signal event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.3
cmmRXNetworkLossofLockEC
Module General Fault rx network loss of lock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.4
cmmTXHostLossofLockEC
Module General Fault tx host loss of lock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.5
cmmHostLaneOutofAlignmentEC
Module General Fault hostlane out of alignment event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.6
cmmOverTemperatureFaultEC
Module Fault Status over temperature fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.7
cmmHardwareFaultEC
Module Fault Status hardware fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.8
cmmInitializationFaultEC
Module Fault Status initialization fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.9
cmmPowersupplyFaultEC
Module Fault Status power supply fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.10
cmmChecksumFaultEC
Module Fault Status checksum fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.11
cmmTemperatureLowAlarmEC
Module temperature low alarm event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.12
cmmTemperatureLowWarningEC
Module temperature low warning event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.13
cmmTemperatureHighWarningEC
Module temperature high warning event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.14
cmmTemperatureHighAlarmEC
Module temperature high alarm event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.15
cmmPowerLowAlarmEC
Module power low alarm event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.16
cmmPowerLowWarningEC
Module power low warning event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.17
cmmPowerHighWarningEC
Module power high warning event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.18
cmmPowerHighAlarmEC
Module power high alarm event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.1.5.1.19

cmmCoherentChannelTable

table
.1.3.6.1.4.1.36673.100.1.15.2.1 · 1 row entry · 35 columns
Open in standard view 
A optical network interface entry containing interface related
objects for a particular port..
cmmCoherentChannelEntry entry .1.3.6.1.4.1.36673.100.1.15.2.1.1
A optical network interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmNetIfIndex
Index of network interface in a coherent optical module.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.1
cmmChannelOperationalStatus
Operational status of the network interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0unknown
1reset
2initialize
3low-power
4high-power-up
5tx-off
6tx-turn-on
7ready
8tx-turn-off
9high-power-down
10fault
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.2
cmmDspOpertionalStatus
Operational status of the Digital signal processor of the network
interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1no-module
2waiting-configuration
3booting-top-half
4waiting-aco-module
5booting-aco-module
6waiting-rx-signal
7booting-bottom-half
8ready
9misc-config
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.3
cmmOperModulationFormat
Specifies the modulation format of the optical signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
1modulation-format-bpsk
2modulation-format-dp-bpsk
3modulation-format-qpsk
4modulation-format-dp-qpsk
5modulation-format-8-qam
6modulation-format-dp-8-qam
7modulation-format-16-qam
8modulation-format-dp-16-qam
9modulation-format-32-qam
10modulation-format-dp-32-qam
11modulation-format-64-qam
12modulation-format-dp-64-qam
13modulation-format-dp-qpsk-200g
14modulation-format-dp-qpsk-ofec
15modulation-format-8qam-200g-ofec
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.4
cmmOperDifferntialEncoding
Enable differential encoding on a optical network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.5
cmmOperPulseShapingRx
Enable or disable rx pulse shaping of the signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.6
cmmOperPulseShapingTx
Enable or disable tx pulse shaping of the signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.7
cmmOperLoopbackType
use to send and receive data from the same network interface
port to verify that the port is operational.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.8
cmmOperPrbsType
Simulate random data for transmission across the
network interface if set.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1prbs7
2prbs9
3prbs11
4prbs15
5prbs20
6prbs23
7prbs31
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.9
cmmOperLosiEnabled
lOSI is enabled or not.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.10
cmmPrbsInSync
PRBS in SYNC.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.11
cmmCurrentPrbsBer
Current PRBS BER in the units of 1e-18.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.12
cmmCurrentBerPeriod
Current BER Period in milli second.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
milli secondsInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.13
cmmCurrentPreFecBer
Current Pre Fec Ber in the units of 1e-18 ber/sec.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18 ber/BER PeriodSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.14
cmmCurrentPostFecBer
Current Post Fec Ber in the units of 1e-18 ber/BER Period.
BER value 2 represents internal error/ Device not ready/
Not applicable/ Value not applicable.
1e-18 ber/BER PeriodSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.15
cmmChromaticDispersion
Current chromatic dispersion in pico second/nano meter (ps/nm).
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
ps/nmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.16
cmmDifferentialGroupDelay
The Differential Group delay in pico second.
psSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.17
cmmOperSoftTxDisable
Disable transmission of data on a network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.18
cmmOperOutputPower
Specifies the output power of the optical network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.19
cmmOperLaserFreq
Specifies the output laser frequency for the optical network
interface in terms of Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.20
cmmMinLaserFreq
Min frequency of the laser in the units of Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.21
cmmMaxLaserFreq
Max frequency of the laser in the units of Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.22
cmmCurrentTxLaserFreq
Current Tx-Laser Frequency in Hz.
0 indicates device not ready/Not applicable/internal error
HzSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.23
cmmTxGridSpacing
Grid spacing.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0grid-spacing-6-25-ghz
1grid-spacing-12-5-ghz
2grid-spacing-25-ghz
3grid-spacing-33-ghz
4grid-spacing-50-ghz
5grid-spacing-100-ghz
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.24
cmmLaserGridSupport
Laser grid suppported by the Coherent Module.
Empty string indicates internal error.
GridSupportCode
Textual Convention: GridSupportCode Bits
Type Values:
0grid-6-25-ghz
1grid-12-5-ghz
2grid-25-ghz
3grid-33-ghz
4grid-50-ghz
5grid-100-ghz
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.25
cmmCurrentOutputPower
Current Output Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.26
cmmCurrentInputPower
Current input power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.27
cmmCurrentPostVoaPower
Current POST VOA Power in dBm.
indicates unavailable
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.28
cmmCurrentProvisionedChannelPower
Current Province Channel Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.29
cmmOSNR
Current OSNR in dB.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.30
cmmCurrentPostVOAProvisionedChannelPower
Current Post VOA Provisioned Channel Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.31
cmmCurrentQMargin
Current Network Q-Margin Value in dB.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error
0.01 dBInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.32
cmmFECUncorrectedBlocksCount
FEC UnCorrected Blocks Count value.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.33
cmmLaserAge
Laser Age mentioned in percentage.
0 meaning Beginning of Life and 100 meaning End of Life.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error.
% Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.34
cmmOperFecMode
FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error.
Enumeration
Enumerated Values:
0unknown
1fec-15per-everest
2fec-15per-denali
3fec-otu4-g709
4fec-otu4-transparent
5fec-otu4-7per-staircase
6fec-25per-hc-sd2
7sd-fec
8sc-fec
9ufec
10ofec
 .1.3.6.1.4.1.36673.100.1.15.2.1.1.35

cmmCoherentChannelFAWSTable

table
.1.3.6.1.4.1.36673.100.1.15.2.2 · 1 row entry · 11 columns
Open in standard view 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentChannelFAWSTableEntry entry .1.3.6.1.4.1.36673.100.1.15.2.2.1
A optical channel interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmRxLos
Netif Rx-Los Alarm.
Enumeration
Enumerated Values:
1rx-los-alarm
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.1
cmmRxOtu
Netif Rx-Otu Alarm. Empty String indicates unavailable.
Zeros indicated no alarm
RxOtuStatusCode
Textual Convention: RxOtuStatusCode Bits
Type Values:
0loss-of-frame
1loss-of-multiframe
2backward-defect-detection
3alarm-indication-signal
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.2
cmmRxOdu
Netif Rx-Odu Alarm. Empty String indicates unavailable.
Zeros indicated no alarm
RxOduStatusCode
Textual Convention: RxOduStatusCode Bits
Type Values:
0backward-defect-indication
1alarm-indication-signal
2open-connection-indication
3locked-defect
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.3
cmmRxOpu
Netif Rx-Opu Alarm. Empty String indicates unavailable.
Zeros indicated no alarm
RxOpuStatusCode
Textual Convention: RxOpuStatusCode Bits
Type Values:
0payload-Mismatch
1client-signal-fail
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.4
cmmRxTs
Netif Rx-Ts Alarm. Empty String indicates unavailable.Zeros indicated no alarm
RxTsStatusCode
Textual Convention: RxTsStatusCode Bits
Type Values:
0loss-of-lock
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.5
cmmInPower
Channel Rx Input power alarm.
Enumeration
Enumerated Values:
1power-low-alarm
2power-low-warning
3power-high-warning
4power-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.6
cmmOutPower
Channel Tx power alarm.
Enumeration
Enumerated Values:
1power-low-alarm
2power-low-warning
3power-high-warning
4power-high-alarm
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.7
cmmPreFecBerSignal
Channel Prefec ber signal status power alarm.
Enumeration
Enumerated Values:
1prefec-ber-signal-degrade
2prefec-ber-signal-failure
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.8
cmmQMarginAlarm
Netif Q-Margin Alarm.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.9
cmmSNRAlarm
Netif SNR Alarm.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.10
cmmChromaticDispersionAlarm
Netif Chromatic Dispersion alarm.
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.2.1.11

cmmCoherentChannelMonitorTable

table
.1.3.6.1.4.1.36673.100.1.15.2.3 · 1 row entry · 22 columns
Open in standard view 
A Coherent threshold Monitor entry containing
all network-interface related monitoring Thresholds for a
particular Slot.
cmmCoherentChannelMonitorTableEntry entry .1.3.6.1.4.1.36673.100.1.15.2.3.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmOperInputPowerHighAlarmThreshold
Specifies the Rx intput power High Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.1
cmmOperInputPowerHighWarningThreshold
Specifies the Rx intput power High Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.2
cmmOperInputPowerLowWarningThreshold
Specifies the Rx intput power Low Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.3
cmmOperInputPowerLowAlarmThreshold
Specifies the Rx intput power low Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.4
cmmPermissibleInputPowerHighAlarmThresholdMin
Specifies the Rx intput power High Alarm Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.5
cmmPermissibleInputPowerHighAlarmThresholdMax
Specifies the Rx intput power High Alarm Maximium Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.6
cmmPermissibleInputPowerHighWarningThresholdMin
Specifies the Rx intput power High Warning Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.7
cmmPermissibleInputPowerHighWarningThresholdMax
Specifies the Rx intput power High Warning Maximum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.8
cmmPermissibleInputPowerLowWarningthresholdMin
Specifies the Rx intput power Low Warning Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.9
cmmPermissibleInputPowerLowWarningthresholdMax
Specifies the Rx intput power Low Warning Maximum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.10
cmmPermissibleInputPowerLowAlarmThresholdMin
Specifies the Rx intput power low Alarm Minimum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.11
cmmPermissibleInputPowerLowAlarmThresholdMax
Specifies the Rx intput power low Alarm Maximum Permissible
threshold value of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.12
cmmOutputPowerHighAlarmThreshold
Specifies the Tx output power High Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.13
cmmOutputPowerHighWarningThreshold
Specifies the Tx output power High Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.14
cmmOutputPowerLowWarningThreshold
Specifies the Tx output power Low Warning threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.15
cmmOutputPowerLowAlarmThreshold
Specifies the Tx output power low Alarm threshold value
of the optical network interface.
-100003 indicates device not ready.
-100002 indicates Not applicable.
-100001 indicates internal error.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.16
cmmOperPreFecBerSignalFailThreshold
Specifies the Signal Fail threshold Value based on pre-fec ber
of the optical network interface.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.17
cmmOperPreFecBerSignalDegradeThreshold
Specifies the Signal Degrade threshold Value based on pre-fec ber
of the optical network interface.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.18
cmmOperPreFecBerSignalclearThreshold
Specifies the Signal Clear threshold Value based on pre-fec ber
of the optical network interface.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.19
cmmOperQMarginThreshold
Current Network Rx Q-Margin Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.20
cmmOperOSNRThreshold
Current OSNR Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.21
cmmOperChromaticDispersionThreshold
Current chromatic dispersion threshold violation in
pico second/nano meter (ps/nm).
-100003 indicates device not ready
'-100001' indicates unavailable
ps/nmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.3.1.22

cmmCoherentChannelConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.2.4 · 1 row entry · 13 columns
Open in standard view 
A optical network interface entry containing interface related
objects for a particular port..
cmmCoherentChannelConfigTableEntry entry .1.3.6.1.4.1.36673.100.1.15.2.4.1
A optical network interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmSoftTxDisable
Disable transmission of data on a network interface.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.1
cmmLosiEnabled
lOSI is enabled or not.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.2
cmmDifferntialEncoding
Enable differential encoding on a optical network interface.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.3
cmmOutputPower
Specifies the output power of the optical network interface.
'-100001' indicates internal error
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.4
cmmLaserFreq
Specifies the output laser frequency for the optical network
interface in terms of Hz.
0 indicates internal error
HzSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.5
cmmModulationFormat
Specifies the modulation format of the optical signal.
-100001 indicates internal error
Enumeration
Enumerated Values:
1modulation-format-bpsk
2modulation-format-dp-bpsk
3modulation-format-qpsk
4modulation-format-dp-qpsk
5modulation-format-8-qam
6modulation-format-dp-8-qam
7modulation-format-16-qam
8modulation-format-dp-16-qam
9modulation-format-32-qam
10modulation-format-dp-32-qam
11modulation-format-64-qam
12modulation-format-dp-64-qam
13modulation-format-dp-qpsk-200g
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.6
cmmPulseShapingRx
Enable or disable rx pulse shaping of the signal.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.7
cmmPulseShapingTx
Enable or disable tx pulse shaping of the signal.
-100001 indicates internal error
Enumeration
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.8
cmmLoopbackType
use to send and receive data from the same network interface
port to verify that the port is operational.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.9
cmmPrbsType
Simulate random data for transmission across the
network interface if set.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1prbs7
2prbs9
3prbs11
4prbs15
5prbs20
6prbs23
7prbs31
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.10
cmmFecMode
FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1fec-15per-everest
2fec-15per-denali
3fec-otu4-g709
4fec-otu4-transparent
5fec-otu4-7per-staircase
6fec-25per-hc-sd2
7sd-fec
8sc-fec
9ufec
10ofec
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.11
cmmOperationalMode
Current operational mode.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1mod-format-dp-8-qam-fec-15per-denali
2mod-format-dp-16-qam-fec-15per-denali
3mod-format-dp-qpsk-fec-15per-denali
4mod-format-dp-qpsk-fec-15per-everest
5mod-format-dp-qpsk-fec-otu4-g709
6mod-format-dp-qpsk-fec-otu4-7per-staircase
7mod-format-dp-16-qam-fec-ofec
8mod-format-dp-qpsk-fec-sc-fec
9mod-format-dp-qpsk-200g-fec-ofec
10mod-format-dp-qpsk-fec-ofec
11mod-format-8qam-200g-fec-ofec
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.12
cmmLinkDownPolicy
Make link down when parameters violate threshold values.
Bits
Enumerated Values:
0pre-fec-ber
1q-margin
2snr
3chromatic-dispersion
4rx-power
 .1.3.6.1.4.1.36673.100.1.15.2.4.1.13

cmmCoherentChannelMonitorConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.2.5 · 1 row entry · 10 columns
Open in standard view 
A optical network interface monitoring entry containing interface related
threshold values for a particular port..
cmmCoherentChannelMonitorConfigEntry entry .1.3.6.1.4.1.36673.100.1.15.2.5.1
A optical network interface monitoring entry containing interface related
threshold values for a particular port..
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmInputPowerHighAlarmThreshold
Specifies the rx-input power High Alarm threshold value of the
optical network interface.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.1
cmmInputPowerHighWarnThreshold
Specifies the rx-input power High Warning threshold value of the
optical network interface.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.2
cmmInputPowerLowWarnThreshold
Specifies the rx-input power Low Alarm threshold value of the
optical network interface.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.3
cmmInputPowerLowAlarmThreshold
Specifies the rx-input power Low Warning threshold value of the
optical network interface.
0.01 dBmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.4
cmmPreFecBerSignalFailureThreshold
Specifies the Pre fec ber Signal Failure value of the
optical network interface.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.5
cmmPreFecBerSignalDegradeThreshold
Specifies the Pre fec ber Signal Degrade value of the optical
network interface.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.6
cmmPreFecBerSignalClearThreshold
Specifies the Pre fec ber Signal CLEAR value of the optical
network interface.
1e-18SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.7
cmmQMarginThreshold
Current Network Rx Q-Margin Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.8
cmmOSNRThreshold
Current OSNR Threshold violation in dB.
-100003 indicates device not ready
'-100001' indicates unavailable
0.01 dBInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.9
cmmChromaticDispersionThreshold
Current chromatic dispersion threshold violation in
pico second/nano meter (ps/nm).
-100003 indicates device not ready
'-100001' indicates unavailable
ps/nmInteger32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.5.1.10

cmmCoherentChannelEventCountTable

table
.1.3.6.1.4.1.36673.100.1.15.2.6 · 1 row entry · 14 columns
Open in standard view 
Event count information for each optical network interface
cmmCoherentChannelEventCountEntry entry .1.3.6.1.4.1.36673.100.1.15.2.6.1
A list of entries containing Coherent Channel network interface
event count information.
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmOperInputPowerHighAlarmThresholdEC
Module Network interface oper input power high alarm threshold
event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.1
cmmOperInputPowerHighWarnThresholdEC
Module Network interface oper input power high warning threshold
event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.2
cmmOperInputPowerLowWarnThresholdEC
Module Network interface oper input power low warning threshold
event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.3
cmmOperInputPowerLowAlarmThresholdEC
Module Network interface oper input power low alarm threshold
event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.4
cmmOutputPowerHighAlarmThresholdEC
Module Network interface output power high alarm
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.5
cmmOutputPowerHighWarnThresholdEC
Module Network interface output power high warning
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.6
cmmOutputPowerLowWarnThresholdEC
Module Network interface output power low warning
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.7
cmmOutputPowerLowAlarmThresholdEC
Module Network interface output power low alarm
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.8
cmmOperPrefecberSignalFailThresholdEC
Module Network interface oper prefecber signal fail
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.9
cmmOperPrefecberSignalDegradeThresholdEC
Module Network interface oper prefecber signal degrade
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.10
cmmQMarginThresholdEC
Module Network interface current Q Margin
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.11
cmmOSNRThresholdEC
Module Network interface current SNR threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.12
cmmChromaticDispersionThresholdEC
Module Network interface current chromatic dispersion
threshold event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.13
cmmRXLossEC
Module Network interface RX loss event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.2.6.1.14

cmmCoherentChannelErrorCountTable

table
.1.3.6.1.4.1.36673.100.1.15.2.7 · 1 row entry · 2 columns
Open in standard view 
A list of entries containing information on the Network-Interface
Error counter values of Coherent Optical Module.
cmmCoherentChannelErrorCountTableEntry entry .1.3.6.1.4.1.36673.100.1.15.2.7.1
Entry of Network-Interface Error
Counter values of Coherent Optical Module.
Indexes
cmmSlotIndex cmmNetIfIndex
Column Syntax OID
cmmFecUncorrectedBlocksCountSinceReset
Specifies the Uncorrected Fec BlockCount value of the network
interface since module reset, in a Coherent optical module.
'0' indicates internal error. Device not ready, Not Applicable.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.7.1.1
cmmOtnSmBip8ErrorCount
Specifies the OTN Section Monitoring BIP-8 Count Value of the
network interface, in a Coherent Optical Module. '0' indicates
internal error, Device not ready, Not Applicable.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.2.7.1.2

cmmCoherentHostTable

table
.1.3.6.1.4.1.36673.100.1.15.3.1 · 1 row entry · 4 columns
Open in standard view 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentHostEntry entry .1.3.6.1.4.1.36673.100.1.15.3.1.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmHostIfIndex
Column Syntax OID
cmmHostIfIndex
Index of host interface in a coherent optical module.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.1
cmmOperFecType
Fec Type of the host interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1rs
2fc
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.2
cmmOperLoopBack
Loopback Type of the host interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.3
cmmHostIfCurrentPreFecBer
The object returns the Pre-Fec-Ber value in the units of 1e-18 ber/BER Period.
BER value 2 represents internal error/ Device not ready/
Value not applicable.
1e-18 ber/BER PeriodSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.3.1.1.4

cmmCoherentHostFAWSTable

table
.1.3.6.1.4.1.36673.100.1.15.3.2 · 1 row entry · 3 columns
Open in standard view 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentHostFAWSTableEntry entry .1.3.6.1.4.1.36673.100.1.15.3.2.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmHostIfIndex
Column Syntax OID
cmmRxPcs
Hostif Rx-Pcs Alarm. Zeros indicate No alarm.
Empty String indicates unavailable
PcsAlarmStatusCode
Textual Convention: PcsAlarmStatusCode Bits
Type Values:
0loss-of-signal
1loss-of-frame
2illegal-alignment-marker
3remote-fault
4local-fault
5high-ber
6bip-error
7deskew-error
8loss-of-block-lock
9loss-of-alignment-marker-lock
10loss-of-alignment
11opu-client-signal-fail
12error-blocks-detected
13none
 .1.3.6.1.4.1.36673.100.1.15.3.2.1.1
cmmTxPcs
Hostif Tx-Pcs Alarm. Empty String indicates unavailable
Zeros indicate No alarm
PcsAlarmStatusCode
Textual Convention: PcsAlarmStatusCode Bits
Type Values:
0loss-of-signal
1loss-of-frame
2illegal-alignment-marker
3remote-fault
4local-fault
5high-ber
6bip-error
7deskew-error
8loss-of-block-lock
9loss-of-alignment-marker-lock
10loss-of-alignment
11opu-client-signal-fail
12error-blocks-detected
13none
 .1.3.6.1.4.1.36673.100.1.15.3.2.1.2
cmmCoherentHostFaultStatus
Hostif Fault Alarm status. Empty String indicates unavailable
Zeros indicate No alarm
HostLaneFaultCode
Textual Convention: HostLaneFaultCode Bits
Type Values:
0tx-host-lol-l0
1tx-host-lol-l1
2tx-host-lol-l2
3tx-host-lol-l3
4ingress-aps-msg-rcvd
5deskew-lock-fault
6out-of-align
7loss-of-align
 .1.3.6.1.4.1.36673.100.1.15.3.2.1.3

cmmCoherentHostConfigTable

table
.1.3.6.1.4.1.36673.100.1.15.3.3 · 1 row entry · 2 columns
Open in standard view 
A optical host interface entry containing interface related
objects for a particular port..
cmmCoherentHostConfigTableEntry entry .1.3.6.1.4.1.36673.100.1.15.3.3.1
A optical host interface entry containing interface related
objects for a particular port..
Indexes
cmmSlotIndex cmmHostIfIndex
Column Syntax OID
cmmFecType
Fec Type of the host interface in a optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1rs
2fc
 .1.3.6.1.4.1.36673.100.1.15.3.3.1.1
cmmLoopBack
Loopback Type of the host interface in a optical module.
-100001 indicates internal error
Enumeration
Enumerated Values:
0none
1shallow
2deep
 .1.3.6.1.4.1.36673.100.1.15.3.3.1.2

cmmCoherentHostEventCountTable

table
.1.3.6.1.4.1.36673.100.1.15.3.4 · 1 row entry · 34 columns
Open in standard view 
Event count information for each host interface
cmmCoherentHostEventCountEntry entry .1.3.6.1.4.1.36673.100.1.15.3.4.1
A list of entries containing Coherent Host interface
event count information.
Indexes
cmmSlotIndex cmmHostIfIndex
Column Syntax OID
cmmIngressPCSLossofSignalEC
Host interface ingress PCS loss of signal event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.1
cmmIngressPCSLossofFrameEC
Host interface ingress PCS loss of frame event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.2
cmmIngressPCSIllegalAlignmentMarkerEC
Host interface ingress PCS illegal alignment marker event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.3
cmmIngressPCSRemoteFaultEC
Host interface ingress PCS remote fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.4
cmmIngressPCSLocalFaultEC
Host interface ingress PCS local fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.5
cmmIngressPCSHighBEREC
Host interface ingress PCS high ber event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.6
cmmIngressPCSBIPErrorEC
Host interface ingress PCS bip error event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.7
cmmIngressPCSDeskewErrorEC
Host interface ingress PCS deskew error event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.8
cmmIngressPCSLossofBlocklockEC
Host interface ingress PCS loss of block lock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.9
cmmIngressPCSLossofAlignmentMarkerLockEC
Host interface ingress PCS loss of alignment marker lock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.10
cmmIngressPCSLossofAlignmentEC
Host interface ingress PCS loss of alignment event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.11
cmmIngressPCSOPUClientSignalFailEC
Host interface ingress PCS OPU client signal fail event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.12
cmmIngressPCSErrorBlocksDetectedEC
Host interface ingress PCS error blocks detected event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.13
cmmEgressPCSLossofSignalEC
Host interface egress PCS loss of signal event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.14
cmmEgressPCSLossofFrameEC
Host interface egress PCS loss of frame event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.15
cmmEgressPCSIllegalAlignmentMarkerEC
Host interface egress PCS illegal alignment marker event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.16
cmmEgressPCSRemoteFaultEC
Host interface egress PCS remote fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.17
cmmEgressPCSLocalFaultEC
Host interface egress PCS local fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.18
cmmEgressPCSHighBEREC
Host interface egress PCS high ber event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.19
cmmEgressPCSBIPErrorEC
Host interface egress PCS bip error event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.20
cmmEgressPCSDeskewErrorEC
Host interface egress PCS deskew error event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.21
cmmEgressPCSLossofBlocklockEC
Host interface egress PCS loss of block lock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.22
cmmEgressPCSLossofAlignmentMarkerLockEC
Host interface egress PCS loss of alignment marker
lock event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.23
cmmEgressPCSLossofAlignmentEC
Host interface egress PCS loss of alignment event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.24
cmmEgressPCSOPUClientSignalFailEC
Host interface egress PCS OPU client signal fail event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.25
cmmEgressPCSErrorBlocksDetectedEC
Host interface egress PCS error blocks detected event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.26
cmmTXHostLolL0EC
Host interface tx loss of lock lane0 event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.27
cmmTXHostLolL1EC
Host interface tx loss of lock lane1 event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.28
cmmTXHostLolL2EC
Host interface tx loss of lock lane2 event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.29
cmmTXHostLolL3EC
Host interface tx loss of lock lane3 event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.30
cmmIngressAPSMsgRcvdEC
Host interface ingress aps message received event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.31
cmmDeskewLockFaultEC
Host interface deskew lock fault event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.32
cmmOutofAlignEC
Host interface out of alignment event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.33
cmmLossofAlignEC
Host interface loss of alignment event count.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.36673.100.1.15.3.4.1.34

cmmCoherentHostErrorCountTable

table
.1.3.6.1.4.1.36673.100.1.15.3.5 · 1 row entry · 1 columns
Open in standard view 
A list of entries containing information on  Host-Interface
Error counter values of  Coherent Optical Module.
cmmCoherentHostErrorCountTableEntry entry .1.3.6.1.4.1.36673.100.1.15.3.5.1
Entry of Host-Interface Counter values of Coherent Optical
Module.
Indexes
cmmSlotIndex cmmHostIfIndex
Column Syntax OID
cmmHostIfFecUncorrectedBlockCount
Uncorrected Fec Block Count Value of the Host-Interface in
Coherent Optical Module. '0' indicates internal error, Not a
number. Device not ready , Not applicable.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.36673.100.1.15.3.5.1.1