cmmFecMode

IPI-CMM-COHERENT-MIB · .1.3.6.1.4.1.36673.100.1.15.2.4.1.11

MIB view Table view

Object

column Enumeration

FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error

Context

MIB: IPI-CMM-COHERENT-MIB
OID: .1.3.6.1.4.1.36673.100.1.15.2.4.1.11
Type: column
Access: readonly
Status: current
Parent: cmmCoherentChannelConfigTableEntry
Table: cmmCoherentChannelConfigTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	none
`1`	fec-15per-everest
`2`	fec-15per-denali
`3`	fec-otu4-g709
`4`	fec-otu4-transparent
`5`	fec-otu4-7per-staircase
`6`	fec-25per-hc-sd2
`7`	sd-fec
`8`	sc-fec
`9`	ufec
`10`	ofec

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cmmSoftTxDisable Disable transmission of data on a network interface. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.1`
cmmPrbsType Simulate random data for transmission across the network interface if set. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.10`
cmmOperationalMode Current operational mode. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.12`
cmmLinkDownPolicy Make link down when parameters violate threshold values.	column	Bits	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.13`
cmmLosiEnabled lOSI is enabled or not. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.2`
cmmDifferntialEncoding Enable differential encoding on a optical network interface. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.3`
cmmOutputPower Specifies the output power of the optical network interface. '-100001' indicates internal error	column	0.01 dBm Integer32	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.4`
cmmLaserFreq Specifies the output laser frequency for the optical network interface in terms of Hz. 0 indicates internal error	column	Hz SNMPv2-SMICounter64	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.5`
cmmModulationFormat Specifies the modulation format of the optical signal. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.6`
cmmPulseShapingRx Enable or disable rx pulse shaping of the signal. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.7`
cmmPulseShapingTx Enable or disable tx pulse shaping of the signal. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.8`
cmmLoopbackType use to send and receive data from the same network interface port to verify that the port is operational. -100001 indicates internal error	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.15.2.4.1.9`