cmmChannelOperationalStatus
IPI-CMM-COHERENT-MIB ·
.1.3.6.1.4.1.36673.100.1.15.2.1.1.2
Object
column
Enumeration
Operational status of the network interface in a optical module. -100003 indicates device not ready -100002 indicates Not applicable -100001 indicates internal error
Context
- MIB
- IPI-CMM-COHERENT-MIB
- OID
.1.3.6.1.4.1.36673.100.1.15.2.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmmCoherentChannelEntry
- Table
- cmmCoherentChannelTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | reset |
2 | initialize |
3 | low-power |
4 | high-power-up |
5 | tx-off |
6 | tx-turn-on |
7 | ready |
8 | tx-turn-off |
9 | high-power-down |
10 | fault |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmmNetIfIndex Index of network interface in a coherent optical module. | column | Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.1 |
| cmmOperLosiEnabled lOSI is enabled or not.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.10 |
| cmmPrbsInSync PRBS in SYNC.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.11 |
| cmmCurrentPrbsBer Current PRBS BER in the units of 1e-18.
BER value 2 represents internal error/ Device not ready/
Value not applicable. | column | 1e-18 SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.12 |
| cmmCurrentBerPeriod Current BER Period in milli second.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | milli seconds Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.13 |
| cmmCurrentPreFecBer Current Pre Fec Ber in the units of 1e-18 ber/sec.
BER value 2 represents internal error/ Device not ready/
Value not applicable. | column | 1e-18 ber/BER Period SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.14 |
| cmmCurrentPostFecBer Current Post Fec Ber in the units of 1e-18 ber/BER Period.
BER value 2 represents internal error/ Device not ready/
Not applicable/ Value not applicable. | column | 1e-18 ber/BER Period SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.15 |
| cmmChromaticDispersion Current chromatic dispersion in pico second/nano meter (ps/nm).
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | ps/nm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.16 |
| cmmDifferentialGroupDelay The Differential Group delay in pico second. | column | ps SNMPv2-SMICounter32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.17 |
| cmmOperSoftTxDisable Disable transmission of data on a network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.18 |
| cmmOperOutputPower Specifies the output power of the optical network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.19 |
| cmmOperLaserFreq Specifies the output laser frequency for the optical network
interface in terms of Hz.
0 indicates device not ready/Not applicable/internal error | column | Hz SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.20 |
| cmmMinLaserFreq Min frequency of the laser in the units of Hz.
0 indicates device not ready/Not applicable/internal error | column | Hz SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.21 |
| cmmMaxLaserFreq Max frequency of the laser in the units of Hz.
0 indicates device not ready/Not applicable/internal error | column | Hz SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.22 |
| cmmCurrentTxLaserFreq Current Tx-Laser Frequency in Hz.
0 indicates device not ready/Not applicable/internal error | column | Hz SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.23 |
| cmmTxGridSpacing Grid spacing.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.24 |
| cmmLaserGridSupport Laser grid suppported by the Coherent Module.
Empty string indicates internal error. | column | GridSupportCode | .1.3.6.1.4.1.36673.100.1.15.2.1.1.25 |
| cmmCurrentOutputPower Current Output Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.26 |
| cmmCurrentInputPower Current input power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.27 |
| cmmCurrentPostVoaPower Current POST VOA Power in dBm.
indicates unavailable | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.28 |
| cmmCurrentProvisionedChannelPower Current Province Channel Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.29 |
| cmmDspOpertionalStatus Operational status of the Digital signal processor of the network
interface in a optical module.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indica… | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.3 |
| cmmOSNR Current OSNR in dB.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dB Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.30 |
| cmmCurrentPostVOAProvisionedChannelPower Current Post VOA Provisioned Channel Power in dBm.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.31 |
| cmmCurrentQMargin Current Network Q-Margin Value in dB.
-100003 indicates device not ready
-100002 indicates Not applicable
'-100001' indicates internal error | column | 0.01 dB Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.32 |
| cmmFECUncorrectedBlocksCount FEC UnCorrected Blocks Count value. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.33 |
| cmmLaserAge Laser Age mentioned in percentage.
0 meaning Beginning of Life and 100 meaning End of Life.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates i… | column | % Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.1.1.34 |
| cmmOperFecMode FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.35 |
| cmmOperModulationFormat Specifies the modulation format of the optical signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.4 |
| cmmOperDifferntialEncoding Enable differential encoding on a optical network interface.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.5 |
| cmmOperPulseShapingRx Enable or disable rx pulse shaping of the signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.6 |
| cmmOperPulseShapingTx Enable or disable tx pulse shaping of the signal.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.7 |
| cmmOperLoopbackType use to send and receive data from the same network interface
port to verify that the port is operational.
-100003 indicates device not ready
-100002 indicates Not applicable
-1000… | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.8 |
| cmmOperPrbsType Simulate random data for transmission across the
network interface if set.
-100003 indicates device not ready
-100002 indicates Not applicable
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.1.1.9 |