cmmModulationFormat
IPI-CMM-COHERENT-MIB ·
.1.3.6.1.4.1.36673.100.1.15.2.4.1.6
Object
column
Enumeration
Specifies the modulation format of the optical signal. -100001 indicates internal error
Context
- MIB
- IPI-CMM-COHERENT-MIB
- OID
.1.3.6.1.4.1.36673.100.1.15.2.4.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cmmCoherentChannelConfigTableEntry
- Table
- cmmCoherentChannelConfigTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | modulation-format-bpsk |
2 | modulation-format-dp-bpsk |
3 | modulation-format-qpsk |
4 | modulation-format-dp-qpsk |
5 | modulation-format-8-qam |
6 | modulation-format-dp-8-qam |
7 | modulation-format-16-qam |
8 | modulation-format-dp-16-qam |
9 | modulation-format-32-qam |
10 | modulation-format-dp-32-qam |
11 | modulation-format-64-qam |
12 | modulation-format-dp-64-qam |
13 | modulation-format-dp-qpsk-200g |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmmSoftTxDisable Disable transmission of data on a network interface.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.1 |
| cmmPrbsType Simulate random data for transmission across the
network interface if set.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.10 |
| cmmFecMode FEC mode for optical signal.
-100003 indicates device not ready
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.11 |
| cmmOperationalMode Current operational mode.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.12 |
| cmmLinkDownPolicy Make link down when parameters violate threshold values. | column | Bits | .1.3.6.1.4.1.36673.100.1.15.2.4.1.13 |
| cmmLosiEnabled lOSI is enabled or not.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.2 |
| cmmDifferntialEncoding Enable differential encoding on a optical network interface.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.3 |
| cmmOutputPower Specifies the output power of the optical network interface.
'-100001' indicates internal error | column | 0.01 dBm Integer32 | .1.3.6.1.4.1.36673.100.1.15.2.4.1.4 |
| cmmLaserFreq Specifies the output laser frequency for the optical network
interface in terms of Hz.
0 indicates internal error | column | Hz SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.100.1.15.2.4.1.5 |
| cmmPulseShapingRx Enable or disable rx pulse shaping of the signal.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.7 |
| cmmPulseShapingTx Enable or disable tx pulse shaping of the signal.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.8 |
| cmmLoopbackType use to send and receive data from the same network interface
port to verify that the port is operational.
-100001 indicates internal error | column | Enumeration | .1.3.6.1.4.1.36673.100.1.15.2.4.1.9 |