An ospfv3VirtIfStateChange notification signifies that there 
has been a change in the state of an OSPFv3 virtual 
interface. 
          
This notification should be generated when the interface 
state regresses (for example, goes from Point-to-Point to Down) 
or progresses to a terminal state (that is, Point-to-Point).

An ospfv3NbrRestartHelperStatusChange notification 
signifies that there has been a change in the 
graceful restart helper state for the neighbor. 
This notification should be generated when the 
neighbor restart helper status transitions for a neighbor.

An ospfv3VirtNbrRestartHelperStatusChange 
notification signifies that there has been a 
change in the graceful restart helper state for 
the virtual neighbor. This notification should be 
generated when the virtual neighbor restart helper status 
transitions for a virtual neighbor.

An ospfv3NssaTranslatorStatusChange notification 
indicates that there has been a change in the router's ability 
to translate OSPFv3 NSSA LSAs into OSPFv3 External LSAs. 
This notification should be generated when the Translator Status 
transitions from or to any defined status on a per area basis.

An hwOspfv3LastAuthKeyExpiry notification 
indicates that the last key associated with an interface has expired.
When this notification is received, either the lifetime of the key should be extended
or a new key should be configured.

An hwOspfv3AuthSequenceNumWrap notification 
indicates that the 64-bit authentication sequence number has wrapped.
When this notification is received, all the keys must be reset
to avoid the possibility of replay attacks.

The object is used to monitor router ID conflict recovery in an intra area.

These objects are used to monitor changed OSPFv3 peer flapping suppress status.

This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm threshold.

This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes has been less than the configured alarm threshold.

This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes exceeds the configured maximum number.

An ospfv3NbrStateChange notification signifies that 
there has been a change in the state of a 
non-virtual OSPFv3 neighbor. This notification should be 
generated when the neighbor state regresses 
(for example, goes from Attempt or Full to 1-Way or 
Down) or progresses to a terminal state (for example, 
2-Way or Full). When an neighbor transitions 
from or to Full on non-broadcast multi-access 
and broadcast networks, the notification should be 
generated by the designated router. A designated 
router transitioning to Down will be noted by 
ospfIfStateChange.

This object indicates that the number of AS-external LSAs generated when an OSPFv3 process imports external routes has been less than the configured maximum number.

This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes exceeds the configured alarm threshold.

This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes has been less than the configured alarm threshold.

This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes exceeds the configured maximum number.

This object indicates that the number of NSSA LSAs generated when an OSPFv3 process imports external routes has been less than the configured maximum number.

This object is used to monitor the router receive a greater age lsa in ospfv3.

This object indicates that the local device deleted OSPFv3 routes advertised by other devices. 
Reset or isolate the device from the network.

This object indicates that the local device did not delete OSPFv3 routes advertised by other devices.

This object indicates that OSPFv3 routes advertised by the local device were deleted by another device. 
Reset or isolate the faulty device from the network.

This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device.

An ospfv3VirtNbrStateChange notification signifies 
that there has been a change in the state of an OSPFv3 
virtual neighbor. This notification should be generated 
when the neighbor state regresses (for example, goes 
from Attempt or Full to 1-Way or Down) or 
progresses to a terminal state (for example, Full).

This object indicates that OSPFv3 routes advertised by the local device were deleted by another device, 
and the possibly faulty device did not support OSPFv3 flush LSA source trace. Log in to the possibly faulty device. 
If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices. 
Neither of the devices displayed in the display ospfv3 purge-source-trace analysis-info  command output is the faulty device.

This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device.

This object indicates that OSPFv3 routes advertised by the local device were deleted by another device. 
Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. 
Otherwise, check other devices.

This object indicates that OSPFv3 routes advertised by the local device were not deleted by another device.

This object indicates that OSPFv3 routes advertised by another device were deleted. 
Reset or isolate the faulty device from the network.

This object indicates that OSPFv3 routes advertised by another device were not deleted.

This object indicates that OSPFv3 routes advertised by another device were deleted, 
and the possibly faulty device did not support OSPFv3 flush LSA source trace. 
Log in to the possibly faulty device. If the device is deleting routes, reset or isolate it from the network. 
Otherwise, check other devices. Neither of the devices displayed in the display ospfv3 purge-source-trace analysis-info 
command output is the faulty device.

This object indicates that OSPFv3 routes advertised by another device were not deleted.

This object indicates that OSPFv3 routes advertised by another device were deleted. Log in to the possibly faulty device. 
If the device is deleting routes, reset or isolate it from the network. Otherwise, check other devices.

This object indicates that OSPFv3 routes advertised by another device were not deleted.

An ospfv3IfConfigError notification signifies that a 
packet has been received on a non-virtual 
interface from a router whose configuration 
parameters conflict with this router's 
configuration parameters. Note that the event 
optionMismatch should cause a notification only if it 
prevents an adjacency from forming.

This object indicates that a routing loop has been detected on the local device.

This object indicates that the routing loop is cleared.

This object indicates that an OSPF link cost adjustment event occurs.

This object indicates that an OSPF link cost adjustment event is cleared.

The object is used to monitor router ID conflict in an intra area.

The object is used to monitor router ID conflict recovery in an intra area.

This object indicates that the number of ospfv3 exceeds the configed threshold.

This object indicates that the number of ospfv3 has been less than the the configed threshold.

An ospfv3VirtIfConfigError notification signifies that a 
packet has been received on a virtual interface 
from a router whose configuration parameters 
conflict with this router's configuration 
parameters. Note that the event optionMismatch 
should cause a notification only if it prevents an 
adjacency from forming.

An ospfv3IfRxBadPacket notification signifies that an 
OSPFv3 packet that cannot be parsed has been received on a 
non-virtual interface.

An ospfv3VirtIfRxBadPacket notification signifies 
that an OSPFv3 packet that cannot be parsed has been received 
on a virtual interface.

An ospfv3IfStateChange notification signifies that there 
has been a change in the state of a non-virtual 
OSPFv3 interface. This notification should be generated 
when the interface state regresses (for example, goes 
from Dr to Down) or progresses to a terminal 
state (that is, Point-to-Point, DR Other, Dr, or 
Backup).

An ospfv3RestartStatusChange notification signifies that 
there has been a change in the graceful restart 
state for the router. This notification should be 
generated when the router restart status 
changes.