hwOspfv3IfRtrDeadInterval
HUAWEI-OSPFV3-MIB ·
.1.3.6.1.4.1.2011.5.25.147.1.6.1.10
Object
column
r/w
seconds HWOspfv3DeadIntRangeTc
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
Context
- MIB
- HUAWEI-OSPFV3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.147.1.6.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- hwOspfv3IfEntry
- Table
- hwOspfv3IfTable
- Siblings
- 19
Syntax
seconds HWOspfv3DeadIntRangeTc
- Source
- HWOspfv3DeadIntRangeTc
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOspfv3IfIndex The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.147.1.6.1.1 |
| hwOspfv3IfState The OSPFv3 Interface State. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.6.1.11 |
| hwOspfv3IfDesignatedRouter The Router ID of the Designated Router. | column | HWOspfv3RouterIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.12 |
| hwOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated
Router. | column | HWOspfv3RouterIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.13 |
| hwOspfv3IfEvents The number of times this OSPFv3 interface has
changed its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.14 |
| hwOspfv3IfRowStatus This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.147.1.6.1.15 |
| hwOspfv3IfMetricValue The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value
of the reference bandwidth is configured
by the ospfv3Refere… | column | OSPF-MIBMetric | .1.3.6.1.4.1.2011.5.25.147.1.6.1.16 |
| hwOspfv3IfLinkScopeLsaCount The total number of Link-Scope link state
advertisements in this link's link state
database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.17 |
| hwOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link state
advertisements' LS checksums contained in this
link's link state database. The sum can be used
to determine if there has be… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.18 |
| hwOspfv3IfPollInterval The larger time interval, in seconds, between
the Hello packets sent to an inactive
non-broadcast multi-access neighbor. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.19 |
| hwOspfv3IfInstId Enables multiple interface instances of OSPFv3
to be run over a single link. Each protocol
instance would be assigned a separate ID. This ID
has local link significance only. | column | HWOspfv3IfInstIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.2 |
| hwOspfv3IfMulticastForwarding The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
me… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.6.1.20 |
| hwOspfv3IfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0 is used for the OSPFv3 backbone. | column | HWOspfv3AreaIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.3 |
| hwOspfv3IfType The OSPFv3 interface type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.6.1.4 |
| hwOspfv3IfAdminStatus The OSPFv3 interface's administrative status.
The value formed on the interface, and the
interface will be advertised as an internal route
to some area. The value 'disabled' de… | column | OSPF-MIBStatus | .1.3.6.1.4.1.2011.5.25.147.1.6.1.5 |
| hwOspfv3IfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not
el… | column | OSPF-MIBDesignatedRouterPriority | .1.3.6.1.4.1.2011.5.25.147.1.6.1.6 |
| hwOspfv3IfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. | column | seconds HWOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.7 |
| hwOspfv3IfRetransInterval The number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
desc… | column | seconds HWOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.8 |
| hwOspfv3IfHelloInterval The length of time, in seconds, between the
Hello packets that the router sends on the
interface. This value must be the same for all
routers attached to a common network. | column | seconds HWHelloRange | .1.3.6.1.4.1.2011.5.25.147.1.6.1.9 |