hwOspfv3VersionNumber
HUAWEI-OSPFV3-MIB ·
.1.3.6.1.4.1.2011.5.25.147.1.1.3
Object
scalar
Enumeration
The version number of OSPF for IPv6 is 3.
Context
- MIB
- HUAWEI-OSPFV3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.147.1.1.3- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hwOspfv3GeneralGroup
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOspfv3RouterId A 32-bit integer uniquely identifying the
router in the Autonomous System. To ensure
uniqueness, this may default to the value of
one of the router's IPv4 host addresses,
repr… | scalar | HWOspfv3RouterIdTc | .1.3.6.1.4.1.2011.5.25.147.1.1.1 |
| hwOspfv3ExtLsaCount The number of AS-Scope External(LS type 0x4005) link state
advertisements in the link state database | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.147.1.1.10 |
| hwOspfv3ExtAreaLsdbLimit The maximum number of non-default
AS-external-LSAs entries that can be stored in the
link state database. If the value is -1, then
there is no limit.
When the numb… | scalar | Integer32 | .1.3.6.1.4.1.2011.5.25.147.1.1.11 |
| hwOspfv3RestartSupport The router's support for OSPFv3 Graceful restart.
Options include: no restart support, only planned
restarts or both planned and unplanned restarts. | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.1.12 |
| hwOspfv3RestartInterval Configured OSPFv3 Graceful restart timeout interval. | scalar | seconds HWOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.2011.5.25.147.1.1.13 |
| hwOspfv3RestartStatus The current status of OSPFv3 Graceful restart capability. | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.1.14 |
| hwOspfv3RestartAge Remaining time in current OSPFv3 Graceful restart
interval. | scalar | seconds HWOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.2011.5.25.147.1.1.15 |
| hwOspfv3RestartExitRc Describes the outcome of the last attempt at a
Graceful restart.
none:............no restart has yet been attempted.
inProgress:......a restart attempt is currently… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.1.16 |
| hwOspfv3NotificationEnable If this object is set to true(1), then it enables
the generation of OSPFv3 Notifications. If it is
set to false(2), these notifications are not
generated.
Configure… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.147.1.1.17 |
| hwOspfv3ReferenceBandwidth Reference bandwidth in kilobits per second for
calculating default interface metrics. The
default value is 100,000 KBPS (100 MBPS).
This object is persistent, and when… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.1.18 |
| hwOspfv3AdminStatus The administrative status of OSPFv3 in the
router. The value 'enabled' denotes that the
OSPFv3 Process is active on at least one
interface; 'disabled' disables it on all
inter… | scalar | OSPF-MIBStatus | .1.3.6.1.4.1.2011.5.25.147.1.1.2 |
| hwOspfv3AreaBdrRtrStatus A flag to note whether this router is an area
border router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.147.1.1.4 |
| hwOspfv3AsBdrRtrStatus A flag to note whether this router is
configured as an Autonomous System border router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.147.1.1.5 |
| hwOspfv3AsScopeLsaCount The number of AS-Scope (for example AS-External) link state
advertisements in the link state database. | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.147.1.1.6 |
| hwOspfv3AsScopeLsaCksumSum The 32-bit unsigned sum of the LS checksums of
the AS-scoped link state advertisements
contained in the link state database. This sum
can be used to determine if there has bee… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.1.7 |
| hwOspfv3OriginateNewLsas The number of new link-state advertisements
that have been originated. This number is
incremented each time the router originates a new
LSA. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.147.1.1.8 |
| hwOspfv3RxNewLsas The number of link state advertisements
received determined to be new instantiations.
This number does not include newer
instantiations of self-originated link state
adverti… | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.147.1.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOspfv3ProcessId The process ID indicates the OSPFv3 process number. The value ranges from 1 to 4294967295. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.12.7 |
| hwOspfv3PurgeHostName This object indicates the name of an OSPFv3 router which purge OSPFv3 routes. | scalar | OctetString | .1.3.6.1.4.1.2011.5.25.147.1.12.14 |
| hwOspfv3PurgeIpAddress This object indicates the IP address of an OSPFv3 router which purge OSPFv3 routes. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.147.1.12.15 |
| hwOspfv3PurgeRouterId This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.147.1.12.16 |
| hwOspfv3AreaIdIndex A 32-bit integer uniquely identifying an area.
Area ID 0 is used for the OSPFv3 backbone. | scalar | HWOspfv3AreaIdTc | .1.3.6.1.4.1.2011.5.25.147.1.12.8 |