hwOspfv3IfHelloInterval
HUAWEI-OSPFV3-MIB ·
.1.3.6.1.4.1.2011.5.25.147.1.6.1.9
Object
column
r/w
seconds HWHelloRange
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
Context
- MIB
- HUAWEI-OSPFV3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.147.1.6.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- hwOspfv3IfEntry
- Table
- hwOspfv3IfTable
- Siblings
- 19
Syntax
seconds HWHelloRange
- Source
- HWHelloRange
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwOspfv3IfIndex The interface index of this OSPFv3 interface.
It corresponds to the interface index of the
IPv6 interface on which OSPFv3 is configured. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.147.1.6.1.1 |
| hwOspfv3IfRtrDeadInterval The number of seconds that a router's Hello
packets have not been seen before its
neighbors declare the router down on the interface.
This should be some multiple of the Hello… | column | seconds HWOspfv3DeadIntRangeTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.10 |
| hwOspfv3IfState The OSPFv3 Interface State. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.6.1.11 |
| hwOspfv3IfDesignatedRouter The Router ID of the Designated Router. | column | HWOspfv3RouterIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.12 |
| hwOspfv3IfBackupDesignatedRouter The Router ID of the Backup Designated
Router. | column | HWOspfv3RouterIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.13 |
| hwOspfv3IfEvents The number of times this OSPFv3 interface has
changed its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.14 |
| hwOspfv3IfRowStatus This object permits management of the table by
facilitating actions such as row creation,
construction and destruction.
The value of this object has no effect on… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.147.1.6.1.15 |
| hwOspfv3IfMetricValue The metric assigned to this interface.
The default value of the Metric is
Reference Bandwidth / ifSpeed. The value
of the reference bandwidth is configured
by the ospfv3Refere… | column | OSPF-MIBMetric | .1.3.6.1.4.1.2011.5.25.147.1.6.1.16 |
| hwOspfv3IfLinkScopeLsaCount The total number of Link-Scope link state
advertisements in this link's link state
database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.17 |
| hwOspfv3IfLinkLsaCksumSum The 32-bit unsigned sum of the Link-Scope link state
advertisements' LS checksums contained in this
link's link state database. The sum can be used
to determine if there has be… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.18 |
| hwOspfv3IfPollInterval The larger time interval, in seconds, between
the Hello packets sent to an inactive
non-broadcast multi-access neighbor. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.147.1.6.1.19 |
| hwOspfv3IfInstId Enables multiple interface instances of OSPFv3
to be run over a single link. Each protocol
instance would be assigned a separate ID. This ID
has local link significance only. | column | HWOspfv3IfInstIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.2 |
| hwOspfv3IfMulticastForwarding The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
me… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.6.1.20 |
| hwOspfv3IfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0 is used for the OSPFv3 backbone. | column | HWOspfv3AreaIdTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.3 |
| hwOspfv3IfType The OSPFv3 interface type. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.147.1.6.1.4 |
| hwOspfv3IfAdminStatus The OSPFv3 interface's administrative status.
The value formed on the interface, and the
interface will be advertised as an internal route
to some area. The value 'disabled' de… | column | OSPF-MIBStatus | .1.3.6.1.4.1.2011.5.25.147.1.6.1.5 |
| hwOspfv3IfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not
el… | column | OSPF-MIBDesignatedRouterPriority | .1.3.6.1.4.1.2011.5.25.147.1.6.1.6 |
| hwOspfv3IfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. | column | seconds HWOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.7 |
| hwOspfv3IfRetransInterval The number of seconds between link state
advertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database
desc… | column | seconds HWOspfv3UpToRefreshIntervalTc | .1.3.6.1.4.1.2011.5.25.147.1.6.1.8 |