hwOspfv3PeerFlappingSuppressStatus

HUAWEI-OSPFV3-MIB · .1.3.6.1.4.1.2011.5.25.147.1.12.10
MIB view Table view

Object

scalar Enumeration 
his object indicates the mode of the OSPFv3 neighbor relationship flapping suppression.
none(1): OSPFv3 neighbor relationship flapping suppression is not started yet.
holddown(2): OSPFv3 neighbor relationship flapping suppression works in Hold-down mode.
holdmaxcost(3): OSPFv3 neighbor relationship flapping suppression works in Hold-max-cost mode.

Context

MIB
HUAWEI-OSPFV3-MIB
OID
.1.3.6.1.4.1.2011.5.25.147.1.12.10
Type
scalar
Access
notifyonly
Status
current
Parent
hwOspfv3NotificationEntry
Siblings
37

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwOspfv3ConfigErrorType
Potential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications. When the last value of a notification using this object is n…
scalarEnumeration.1.3.6.1.4.1.2011.5.25.147.1.12.1
hwOspfv3PeerFlappingSuppressReason
The reason of peer flapping suppress status change.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.147.1.12.11
hwOspfv3LsaId
A 32-bit integer uniquely identifies an area. LSA-ID 0.0.0.0 is used for the OSPF LSA.
scalarHWOspfv3RouterIdTc.1.3.6.1.4.1.2011.5.25.147.1.12.12
hwOspfv3LsaAge
This age of the ospf lsa.
scalarInteger32.1.3.6.1.4.1.2011.5.25.147.1.12.13
hwOspfv3PurgeHostName
This object indicates the name of an OSPFv3 router which purge OSPFv3 routes.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.14
hwOspfv3PurgeIpAddress
This object indicates the IP address of an OSPFv3 router which purge OSPFv3 routes.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.15
hwOspfv3PurgeRouterId
This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.16
hwOspfv3FlushLsaNum
This object indicates the number of LSAs deleted by the local device or another device.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.17
hwOspfv3AffectedNodeNum
This object indicates the number of affected node when OSPFv3 routes were deleted.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.18
hwOspfv3TotalNodeNum
This object indicates the total number of node in the System.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.19
hwOspfv3PacketType
OSPFv3 packet types. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object sh…
scalarEnumeration.1.3.6.1.4.1.2011.5.25.147.1.12.2
hwOspfv3PurgeStatPeriod
This object indicates the period interval for purge statistic.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.20
hwOspfv3RuledOutDeviceNum
This object indicates the number of node ruled out when checking faulty device.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.21
hwOspfv3PurgeHostName1
This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.22
hwOspfv3PurgeHostName2
This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.23
hwOspfv3PurgeHostName3
This object indicates the name of an OSPFv3 router which maybe purge OSPFv3 routes.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.24
hwOspfv3PurgeIpAddress1
This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.25
hwOspfv3PurgeIpAddress2
This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.26
hwOspfv3PurgeIpAddress3
This object indicates the IP address of an OSPFv3 router which maybe purge OSPFv3 routes.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.27
hwOspfv3PurgeRouterId1
This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.28
hwOspfv3PurgeRouterId2
This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.29
hwOspfv3PacketSrc
The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. When the last value of a notification using this object is needed, but no notifications …
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.3
hwOspfv3PurgeRouterId3
This object indicates the 32-bit integer that uniquely identifies the router in the Autonomous System.
scalarINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.5.25.147.1.12.30
hwOspfv3LoopDetectType
This object indicates the type of the OSPFv3 import route loop detect.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.31
hwOspfv3LoopDetectProtocolAttr
This object indicates the protocol attribute of the OSPFv3 import route loop detect.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.32
hwOspfv3LoopDetectRedistributeID1
This object indicates the redis-list router id and process id of the OSPFv3 import route loop detect.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.33
hwOspfv3LoopDetectRedistributeID2
This object indicates the redis-list router id and process id of the OSPFv3 import route loop detect.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.34
hwOspfv3CostAdjustReason
This object indicates the reason why OSPFv3 adjusts the link cost.
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.35
hwOspfv3OriginalCost
This object indicates the original cost.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.36
hwOspfv3AdjustedCost
This object indicates Link cost of the current event that triggers OSPFv3 adjustment.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.37
hwOspfv3NbrThresholdUpper
This object indicates the upper alarm threshold for the number of neighbors.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.38
hwOspfv3IfName
The interface name
scalarOctetString.1.3.6.1.4.1.2011.5.25.147.1.12.4
hwOspfv3IfStateChgReason
Interface state change reason.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.147.1.12.5
hwOspfv3NbrStateChgReason
Neighbor state change reason.
scalarEnumeration.1.3.6.1.4.1.2011.5.25.147.1.12.6
hwOspfv3ProcessId
The process ID indicates the OSPFv3 process number. The value ranges from 1 to 4294967295.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.147.1.12.7
hwOspfv3AreaIdIndex
A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.
scalarHWOspfv3AreaIdTc.1.3.6.1.4.1.2011.5.25.147.1.12.8
hwOspfv3NewRouterId
A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, repr…
scalarHWOspfv3RouterIdTc.1.3.6.1.4.1.2011.5.25.147.1.12.9