HUAWEI-MINM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
125

hwMinMMacTnlCfgTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2 · 1 row entry · 16 columns
Open in standard view 
Indicates a configuration information table of Mac-tunnel.
hwMinMMacTnlCfgEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1
Indicates the entry in the tunnel configuration table of the mac-tunnel.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMMacTnlIndex
Indicates the index of Mac Tunnel. It begins with one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.1
hwMinMMacTnlName
Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.11
hwMinMMacTnlDMac
Indicates the remote MAC address of the current mac-tunnel.
By default, there is no such configuration.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.12
hwMinMMacTnlBVlanID
Indicates BVLAN value of the current BVLAN used by the mac-tunnel: It ranges from 1 to 4094. By default, BVLAN value is not configured.
The VLAN here must have been created and be in the backbone VLAN used by the mac-tu…
Q-BRIDGE-MIBVlanIdOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.13
hwMinMMacTnlBVlanType
Indicates the B-TAG type of the BVLAN. By default, it is 88a8.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.14
hwMinMMacTnlPriorityValue
Indicates priority level of the mac-tunnel.
It is used to set the priority field of B-TAG.
There are eight priority levels. By default, the I-TAG priority is used.
The special value of eight is used to indicate that pr…
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.15
hwMinMMacTnlOutgoingIfIndex
Indicates the port used in the mac-tunnel. By default, it is not configured.
The value zero is used to indicate that interface was unknown or none.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.16
hwMinMMacTnlSplitHorizonEnable
Indicates the split horizon of tunnels. By default, it is enabled.
When split horizon is enabled on two mac-tunnels, the two tunnels cannot exchange packets.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.17
hwMinMMacTnlAdminStatus
Indicates the administration status of the mac-tunnel.
HWAdminStatusr/w
Textual Convention: HWAdminStatus Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.18
hwMinMMacTnlOperStatus
Indicates the physical state of the mac-tunnel.
HWOperStatus
Textual Convention: HWOperStatus Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.19
hwMinMMacTnlDescription
Indicates descriptive information of the static Mac-In-Mac tunnel.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.20
hwMinMMacTnlStatisticsReset
Indicates the reset on traffic statistics of the mac-tunnel.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.21
hwMinMMacTnlPriorityTrustITag
Indicates that the I-TAG priority is copied to the mac-tunnel.
By default, the I-TAG priority is not copied to the mac-tunnel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.22
hwMinMMacTnlDeiTrustIDei
Indicates that the I-DEI priority is copied to the mac-tunnel.
By default, the I-DEI priority is not copied to the mac-tunnel.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.23
hwMinMMacTnlDeiValue
Indicates DEI of the mac-tunnel. It is used to set the DEI field of B-TAG.
When DEI is true, the value is set to 1.
When DEI is false, the value is set to 0.
By default, the I-DEI priority is not copied to the mac-tu…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.24
hwMinMMacTnlRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.2.1.51

hwMinMMacTnlStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3 · 1 row entry · 4 columns
Open in standard view 
Indicates a query for the hwMinMMacTnlStatisticsTable of the mac-tunnel.
hwMinMMacTnlStatisticsEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1
Indicates an entry query for the hwMinMMacTnlStatisticsTable of the mac-tunnel.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMMacTnlInPackets
Indicates the number of packets received by the mac-tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.11
hwMinMMacTnlInBytes
Indicates the number of bytes received by the mac-tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.12
hwMinMMacTnlOutPackets
Indicates the number of packets sent by the mac-tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.13
hwMinMMacTnlOutBytes
Indicates the number of bytes sent by the mac-tunnel.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.3.1.14

hwMacTnlNameToIndexMappingTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4 · 1 row entry · 2 columns
Open in standard view 
Indicates the mapping table of the tunnel name and tunnel index.
hwMacTnlNameToIndexMappingEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1
Indicates the mapping table entry of the tunnel name and tunnel index.
Indexes
hwMacTnlName
Column Syntax OID
hwMacTnlName
Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.1
hwMacTnlIndex
Indicates the tunnel index.It begins with one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.1.4.1.11

hwMinMMacTnlCCTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1 · 1 row entry · 6 columns
Open in standard view 
Indicates the parameters used to describe CC packets.
hwMinMMacTnlCCEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1
Indicates the CC table entry.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMMacTnlCfmEnable
Indicates that CFM is enabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.11
hwMinMMacTnlCCInterval
Indicates the time interval of CC packets.
HwDot1agCfmCcmIntervalr/w
Textual Convention: HwDot1agCfmCcmInterval Enumeration
Type Values:
1intervalInvalid
2interval300Hz
3interval10ms
4interval100ms
5interval1s
6interval10s
7interval1min
8interval10min
9interval20ms
10interval30ms
11interval50ms
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.12
hwMinMMacTnlSomeRMepCcmDefect
Indicates a connectivity failure of tunnels.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.13
hwMinMMacTnlSomeRdiDefect
Indicates whether the RDI packet from the remote end is received.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.14
hwMinMMacTnlCcReceiveEnabled
Whether CC reception is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.15
hwMinMMacTnlCCRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.1.1.51

hwMinMMacTnlLbTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2 · 1 row entry · 8 columns
Open in standard view 
Indicates the parameters used to describe Lb packets.
hwMinMMacTnlLbEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1
Indicates the loopback table entry.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMMacTnlLbmEnable
Indicates that the MAC Ping is started inside the tunnel.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.11
hwMinMMacTnlLbmTimeStamp
Indicates the operation time.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.12
hwMinMMacTnlLbmTimeOut
Indicates the timeout period entered by a user, in ms. By default, it is 2000.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.13
hwMinMMacTnlLbmTimes
Indicates the number of times that Ping is entered.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.14
hwMinMMacTnlLbmSize
Indicates the size of an Lbm packet.
Integer32r/w
Constraints:
range: 64-1480
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.15
hwMinMMacTnlLbrIn
Indicates the number of valid LBR packets received
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.16
hwMinMMacTnlLbmResult
Whether the MAC ping operation for a tunnel is over.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.17
hwMinMMacTnlLbRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.2.1.51

hwMinMMacTnlLbResultTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3 · 1 row entry · 4 columns
Open in standard view 
Performance statistics returned by using the MAC ping command for a tunnel.
hwMinMMacTnlLbResultEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1
Indicates the loopback table entry.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMMacTnlMacPingRTTMin
The minimum round trip time.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.11
hwMinMMacTnlMacPingRTTMax
The maximum round trip time.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.12
hwMinMMacTnlMacPingRTTAvg
The average round trip time.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.13
hwMinMMacTnlMacPingPacketLossRatio
The packet loss ratio.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.3.1.14

hwMinMMacTnlLtmTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4 · 1 row entry · 9 columns
Open in standard view 
Indicates the parameters used to describe Ltm packets.
hwMinMMacTnlLtmEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1
Indicates the linktrace table entry.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMMacTnlLtmEnable
Indicates that the MAC Trace is started inside the tunnel.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.11
hwMinMMacTnlLtmTimeStamp
The time stamp for enabling the MAC trace operation for a tunnel.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.12
hwMinMMacTnlLtmTimeOut
Indicates the timeout period entered by a user, in ms. By default, it is 2000.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.13
hwMinMMacTnlLtmTtl
Indicates the living cycle of Ltm packets.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.14
hwMinMMacTnlLtmFlags
The flags field of an LTM packet.
Bits
Enumerated Values:
0useFDBonly
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.15
hwMinMMacTnlLtmSeqNumber
The sequence number of an LTM packet.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.16
hwMinMMacTnlLtmEgressIdentifier
Indicates the egress ID of Ltm packets.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.17
hwMinMMacTnlLtmResult
Two conditions are used to determine whether the MAC trace operation to a tunnel is over: (1) The peer of a tunnel has been traced. (2) The preset timer for timeout is triggered.
Either condition indicates the completio…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.18
hwMinMMacTnlLtmRowStatus
Indicates the row status.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.4.1.51

hwMinMMacTnlLtrTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5 · 1 row entry · 15 columns
Open in standard view 
Indicates the parameters used to describe Ltr packets.
hwMinMMacTnlLtrEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1
Indicates the linktraceRelay table entry.
Indexes
hwMinMMacTnlIndex hwMinMMacTnlLtrSeqNumber hwMinMMacTnlLtrReceiveOrder
Column Syntax OID
hwMinMMacTnlLtrSeqNumber
Indicates the parameters used to describe Ltr packets.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.1
hwMinMMacTnlLtrReceiveOrder
An index to distinguish among multiple LTRs with the same LTR
Transaction Identifier field value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.2
hwMinMMacTnlLtrTtl
TTL field value for a returned LTR.
Unsigned32
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.11
hwMinMMacTnlLtrForwarded
Indicates an identifier that shows whether the LTM packet should be forwarded to the next hop.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.12
hwMinMMacTnlLtrLastEgressIdentifier
LTR packet is a response packet to a LTM packet.
The LTM packet is the last packet sent by a port on a device.
This variable indicates the port identifier of the LTM packet.
The last six bytes indicate the MAC addres…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.13
hwMinMMacTnlLtrNextEgressIdentifier
If the LTM packet needs to be forwarded to the next hop, the port identifier of the next hop should be added to the TVL field in the response LTR packet. The last six bytes indicate the MAC address, and the first two by…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.14
hwMinMMacTnlLtrRelay
Indicates the value in the Relay Action field.
HwDot1agCfmRelayActionFieldValue
Textual Convention: HwDot1agCfmRelayActionFieldValue Enumeration
Type Values:
1rlyHit
2rlyFdb
3rlyMpdb
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.15
hwMinMMacTnlLtrIngress
The value returned in the Ingress Action Field of the LTM.
HwDot1agCfmIngressActionFieldValue
Textual Convention: HwDot1agCfmIngressActionFieldValue Enumeration
Type Values:
1ingOk
2ingDown
3ingBlocked
4ingVid
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.16
hwMinMMacTnlLtrIngressMac
MAC address returned in the ingress MAC address field.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.17
hwMinMMacTnlLtrIngressPortIdSubtype
Format of the Ingress Port ID.
HwLldpPortIdSubtype
Textual Convention: HwLldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.18
hwMinMMacTnlLtrIngressPortId
Ingress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrIngressPortIdSubtype object.
HwLldpPortId
Textual Convention: HwLldpPortId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.19
hwMinMMacTnlLtrEgress
The value returned in the Egress Action Field of the LTM.
HwDot1agCfmEgressActionFieldValue
Textual Convention: HwDot1agCfmEgressActionFieldValue Enumeration
Type Values:
1egrOK
2egrDown
3egrBlocked
4egrVid
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.20
hwMinMMacTnlLtrEgressMac
MAC address returned in the egress MAC address field.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.21
hwMinMMacTnlLtrEgressPortIdSubtype
Format of the egress Port ID.
HwLldpPortIdSubtype
Textual Convention: HwLldpPortIdSubtype Enumeration
Type Values:
1interfaceAlias
2portComponent
3macAddress
4networkAddress
5interfaceName
6agentCircuitId
7local
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.22
hwMinMMacTnlLtrEgressPortId
Egress Port ID. The format of this object is determined by
the value of the dot1agCfmLtrEgressPortIdSubtype object.
HwLldpPortId
Textual Convention: HwLldpPortId OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.2.5.1.23

hwMinMMacTnlApsCfgTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1 · 1 row entry · 13 columns
Open in standard view 
Indicates the configuration table for the Aps protection of the mac-tunnel.
hwMinMMacTnlApsCfgEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1
Indicates the configuration table entry for the Aps protection of the mac-tunnel.
Indexes
hwMinMMacTnlIndex
Column Syntax OID
hwMinMProtectMacTnlIndex
Indicates the index of ProtectMacTunnel. It begins with one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.11
hwMinMProtectMacTnlName
Indicates the tunnel name of the protective mac-tunnel.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.12
hwMinMProtectMacTnlDMac
Indicates the remote MAC address of the protecting mac-tunnel.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.13
hwMinMProtectMacTnlBVlanID
Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.14
hwMinMProtectApsSwitchMode
Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels.
oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends
oneplusoneunidirectional(2): 1 + 1 switchover protection modes…
HWProtectModer/w
Textual Convention: HWProtectMode Enumeration
Type Values:
1onePlusOneBidirectional
2onePlusOneUnidirectional
3oneToOne
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.15
hwMinMProtectProtocolApsEnable
Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled.
By default, the protocol is disabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.16
hwMinMProtectApsFastInterval
Indicates the configuration of fast sending time interval for each protection group.
The time intervals for fast sending of Aps packets described in the G.8031 are as follows:
By default, the time interval for fast send…
HWApsIntervalr/w
Textual Convention: HWApsInterval Enumeration
Type Values:
1apsInterval3dot3ms
2apsInterval5ms
3apsInterval10ms
4apsInterval15ms
5apsInterval20ms
6apsInterval30ms
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.17
hwMinMProtectHoldoffTime
Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms.
It ranges from 0 to 100.
By default, the switchover restoration time is not delayed. The value of delay is zero.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18
hwMinMProtectRevMode
Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.19
hwMinMProtectRevWtrTime
Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels.
By default, the switchover mode is restoration. The restoration time is five minutes.
Integer32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.20
hwMinMProtectSwitchOperation
Indicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the lock, force and manual commands, and WTR …
HWSwitchOperationr/w
Textual Convention: HWSwitchOperation Enumeration
Type Values:
1clear
2lock
3force
4manual
5null
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21
hwMinMProtectProtocol
Indicates the protection protocol of the protection group of mac-tunnels.
ProtocolAPS(1): use an APS protocol to enhance the protection switching.
ProtocolOAM(2): not using any APS protocol to enhance the protection swi…
HWProtectProtocolr/w
Textual Convention: HWProtectProtocol Enumeration
Type Values:
1protocolAps
2protocolOam
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.22
hwMinMProtectRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.51

hwMinMSICfgTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.2 · 1 row entry · 27 columns
Open in standard view 
Indicates the configuration table of a service instance.
hwMinMSICfgEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1
Indicates the configuration table entry of a service instance.
Indexes
hwMinMSIIndex
Column Syntax OID
hwMinMSIIndex
Indicates the Index of Service Instance.It begins with one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.1
hwMinMSIID
Indicates the ID of a service instance. It can be any value within 24 bits.
By default, the value is null.
One ID can be configured to one service instance only.
Integer32r/w
Constraints:
range: 0-16777216
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.11
hwMinMSIName
Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.12
hwMinMSIServiceType
Indicates the type of a service instance as follows:
p2p: indicates the type of a point-to-point service instance.
mp2mp: indicates the type of a multi-point to multi-point service instance.
By default, the service type…
HWServiceTyper/w
Textual Convention: HWServiceType Enumeration
Type Values:
1p2p
2mp2mp
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.13
hwMinMSIPriorityTrust8021p
Indicates that the priority of user packet based on 802.1Q is trusted.
By default, no user priority is trusted.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.14
hwMinMSIPriorityValue
Indicates priority level of a service instance.
It is used to set the priority field of I-TAG.
By default, no user priority is trusted and the priority is zero.
The special value of eight is used to indicate that prior…
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.15
hwMinMSIInterfaceType
Indicates the interface type of a service instance.
transparent: indicates the transparent transmission mode.
one-to-one: indicates the one-to-one in the s-tagged mode.
bundling: indicates the bundling in the s-tagged m…
HWInterfaceTyper/w
Textual Convention: HWInterfaceType Enumeration
Type Values:
1transparent
2oneToOne
3bundling
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.16
hwMinMSIAdminStatus
Indicates the administration status of a service instance.
HWAdminStatusr/w
Textual Convention: HWAdminStatus Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.17
hwMinMSIOperStatus
Indicates the physical status of a service instance.
HWOperStatus
Textual Convention: HWOperStatus Enumeration
Type Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.18
hwMinMSIMacLearningEnable
Disable the MAC learning of a service instance. By default, the MAC learning is enabled.
This object applies to the service instance of mp2mp only.
It is invalid in the service type of p2p.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.19
hwMinMSIMacLimitAction
Indicates MAC learning restriction of a service instance.
After the number of MAC address entries reaches the limit, the system takes the following actions:
discard: indicates that packets with new MAC address are disca…
HWProcessBehaviorr/w
Textual Convention: HWProcessBehavior Enumeration
Type Values:
1discard
2forward
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.20
hwMinMSIMacLimitAlarm
Indicates MAC learning restriction of a service instance.
Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows:
disable: indicates no alarm is sent.
enable: indicat…
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21
hwMinMSIMacLimitMaxinum
Indicates MAC learning restriction of a service instance.
The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072.
When the number is set to zero, no restriction is imposed…
Integer32r/w
Constraints:
range: 0-131072
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.22
hwMinMSIL2CtrlProProcess
This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all…
Bitsr/w
Enumerated Values:
0all
1stp
2lldp
3lacp
4dot3ah
5dot1ag
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23
hwMinMSIUnknownUnicastEnbale
Indicates how a service instance processes an unknown unicast packet.
By default, the service instance is allowed to broadcast the unknown unicast packet.
This object applies to the mp2mp service instance only.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.24
hwMinMSIMulticastEnable
Indicates how a service instance processes an unknown multicast packet.
By default, the service instance is allowed to broadcast the unknown multicast packet.
This object applies to the mp2mp service instance only.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.25
hwMinMSIBroadcastEnable
Indicates how a service instance processes a broadcast packet.
By default, the service instance is allowed to forward the broadcast packet.
This object applies to the mp2mp service instance only.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.26
hwMinMSIDescription
Indicates descriptive information of a service instance.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
OctetStringr/w
Constraints:
range: 1-80
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.27
hwMinMSIStatisticsEnable
Indicates that the traffic statistics is enabled on a service instance.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.28
hwMinMSIStatisticsReset
Indicates the reset on traffic statistics of a service instance.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.29
hwMinMSIFcsTransparentEnable
The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.30
hwMinMSIIngressPriorityValue
Indicates the source priority of a service instance.
It is used to set the I-TAG priority field when packets are
encapsulated for transmission on the tunnel.
The source priority has eight levels that range from 0 to 7…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.31
hwMinMSIEgressPriorityTrustBTag
Indicates that the destination priority of a service
instance is copied from the B-TAG priority.
It is used to set whether the I-TAG priority is copied from the B-TAG
priority when packets reach the end of the tunnel…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.32
hwMinMSIIngressDeiValue
Indicates the source DEI of a service instance.
It is used to set the DEI field when packets are encapsulated for transmission
on the tunnel. When DEI is true, the value is set to 1.
When DEI is false, the value is s…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.33
hwMinMSIEgressDeiTrustBDei
Indicates that the destination DEI of a service instance
is copied from the B-DEI priority.
It is used to set whether the DEI of I-TAG is coped from B-DEI
when packets reach the end of the tunnel and are decpasulated…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.34
hwMinMSIIsolateAll
Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.35
hwMinMSIRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.51

hwMinMSIMappingTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.3 · 1 row entry · 7 columns
Open in standard view 
Indicates the configuration table of a service instance user.
hwMinMSIMappingEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1
Indicates the configuration table entry of a service instance user.
Indexes
hwMinMSIIndex hwMinMSIMappingIfIndex hwMinMSIMappingVlanPriority hwMinMSIMappingGlobalVlanID
Column Syntax OID
hwMinMSIMappingIfIndex
The port that is mapped to the current service instance. If the value is 0, it means that port mapping is not supported.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.1
hwMinMSIMappingVlanPriority
The priority of a user's packets that are mapped to the current service instance. If the value is 8, it means that the priority mapping is not supported.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.2
hwMinMSIMappingGlobalVlanID
The global VLAN ID that is mapped to the current service instance. If the value is 0, it means that the global VLAN mapping is not supported.
Q-BRIDGE-MIBVlanIdOrNone
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.3
hwMinMSIMappingVlanListLow
Indicates the VLAN ID starting value of a service instance user.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.11
hwMinMSIMappingVlanListHigh
Indicates the VLAN ID ending value of a service instance user.
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.12
hwMinMSIMappingUserIsolate
Indicates that the specified mapping user of a service instance is isolated. By default, the isolation is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service type of p2p
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.13
hwMinMSIMappingRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.3.1.51

hwMinMSIBindMacTnlTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.4 · 1 row entry · 2 columns
Open in standard view 
Indicates the mac-tunnel table bound with a service instance.
hwMinMSIBindMacTnlEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1
Indicates the mac-tunnel table entry bound with a service instance.
Indexes
hwMinMSIIndex hwMinMSIBindMacTnlIndex
Column Syntax OID
hwMinMSIBindMacTnlIndex
Indicates the index of Mac Tunnel. It begins with one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.1
hwMinMSIBindMacTnlRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.4.1.51

hwMinMSIStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.5 · 1 row entry · 4 columns
Open in standard view 
Indicates the hwMinMSIStatisticsTable of a service instance.
hwMinMSIStatisticsEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1
Indicates the hwMinMSIStatisticsTable entry of a service instance.
Indexes
hwMinMSIIndex
Column Syntax OID
hwMinMSIInPackets
Indicates the number of packets received by a user of the current service instance.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.11
hwMinMSIInBytes
Indicates the number of bytes received by a user of the current service instance.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.12
hwMinMSIOutPackets
Indicates the number of packets sent by a user of the current service instance.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.13
hwMinMSIOutBytes
Indicates the number of bytes sent by a user of the current service instance.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.5.1.14

hwMinMSIStaticMacFwdTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.6 · 1 row entry · 6 columns
Open in standard view 
Indicates the static MAC forwarding table of a service instance:
hwMinMSIStaticMacFwdEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1
Indicates the static MAC forwarding table entry of a service instance:
Indexes
hwMinMSIIndex hwMinMSIStaticMacFwdCDMac
Column Syntax OID
hwMinMSIStaticMacFwdCDMac
Indicates the destination MAC address of a customer.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.1
hwMinMSIStaticMacFwdMacTnlName
Indicates the name of the mac-tunnel.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.11
hwMinMSIStaticMacFwdOutgoingIfIndex
Indicates a outbound port.
The value zero is used to indicate that interface was unknown or none.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.12
hwMinMSIStaticMacFwdVlanID
Indicates the downstream vlanid.
The special value of zero is used to indicate that no VLAN-ID is present or used.
Q-BRIDGE-MIBVlanIdOrNoner/w
Textual Convention: Q-BRIDGE-MIBVlanIdOrNone Integer32
Type Constraints:
range: 0..4094
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.13
hwMinMSIStaticMacFwdType
Indicates the type of the static MAC forwarding table of a service instance:
static(1): indicates a static entry.
blackhole(2): indicates a blackhole entry.
HWStaticMacFwdTyper/w
Textual Convention: HWStaticMacFwdType Enumeration
Type Values:
1static
2blackhole
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.14
hwMinMSIStaticMacFwdRowStatus
Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.6.1.51

hwSINameToIndexMappingTable

table
.1.3.6.1.4.1.2011.5.25.133.1.1.3.7 · 1 row entry · 2 columns
Open in standard view 
Indicates the name and the index mapping table of a service instance.
hwSINameToIndexMappingEntry entry .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1
Indicates the name and the index mapping table entry of a service instance.
Indexes
hwSIName
Column Syntax OID
hwSIName
Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.1
hwSIIndex
Indicates the index of a service instance.It begins with one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.133.1.1.3.7.1.11