hwMinMSIMacLimitAlarm
HUAWEI-MINM-MIB ·
.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21
Object
Indicates MAC learning restriction of a service instance. Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows: disable: indicates no alarm is sent. enable: indicates alarm is sent in syslog.
Context
- MIB
- HUAWEI-MINM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwMinMSICfgEntry
- Table
- hwMinMSICfgTable
- Siblings
- 26
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMinMSIIndex Indicates the Index of Service Instance.It begins with one. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.1 |
| hwMinMSIID Indicates the ID of a service instance. It can be any value within 24 bits.
By default, the value is null.
One ID can be configured to one service instance only. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.11 |
| hwMinMSIName Indicates the name of a service instance.
It is a character string with a maximum of 31 bytes and a minimum of 1 byte. | column | OctetString | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.12 |
| hwMinMSIServiceType Indicates the type of a service instance as follows:
p2p: indicates the type of a point-to-point service instance.
mp2mp: indicates the type of a multi-point to multi-point servic… | column | HWServiceType | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.13 |
| hwMinMSIPriorityTrust8021p Indicates that the priority of user packet based on 802.1Q is trusted.
By default, no user priority is trusted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.14 |
| hwMinMSIPriorityValue Indicates priority level of a service instance.
It is used to set the priority field of I-TAG.
By default, no user priority is trusted and the priority is zero.
The special value… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.15 |
| hwMinMSIInterfaceType Indicates the interface type of a service instance.
transparent: indicates the transparent transmission mode.
one-to-one: indicates the one-to-one in the s-tagged mode.
bundling: … | column | HWInterfaceType | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.16 |
| hwMinMSIAdminStatus Indicates the administration status of a service instance. | column | HWAdminStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.17 |
| hwMinMSIOperStatus Indicates the physical status of a service instance. | column | HWOperStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.18 |
| hwMinMSIMacLearningEnable Disable the MAC learning of a service instance. By default, the MAC learning is enabled.
This object applies to the service instance of mp2mp only.
It is invalid in the service t… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.19 |
| hwMinMSIMacLimitAction Indicates MAC learning restriction of a service instance.
After the number of MAC address entries reaches the limit, the system takes the following actions:
discard: indicates tha… | column | HWProcessBehavior | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.20 |
| hwMinMSIMacLimitMaxinum Indicates MAC learning restriction of a service instance.
The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072.
When the number i… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.22 |
| hwMinMSIL2CtrlProProcess This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packe… | column | Bits | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23 |
| hwMinMSIUnknownUnicastEnbale Indicates how a service instance processes an unknown unicast packet.
By default, the service instance is allowed to broadcast the unknown unicast packet.
This object applies to … | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.24 |
| hwMinMSIMulticastEnable Indicates how a service instance processes an unknown multicast packet.
By default, the service instance is allowed to broadcast the unknown multicast packet.
This object applies… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.25 |
| hwMinMSIBroadcastEnable Indicates how a service instance processes a broadcast packet.
By default, the service instance is allowed to forward the broadcast packet.
This object applies to the mp2mp servi… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.26 |
| hwMinMSIDescription Indicates descriptive information of a service instance.
Its length ranges from 1 to 80 bytes and the first byte cannot be a space. | column | OctetString | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.27 |
| hwMinMSIStatisticsEnable Indicates that the traffic statistics is enabled on a service instance. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.28 |
| hwMinMSIStatisticsReset Indicates the reset on traffic statistics of a service instance. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.29 |
| hwMinMSIFcsTransparentEnable The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.30 |
| hwMinMSIIngressPriorityValue Indicates the source priority of a service instance.
It is used to set the I-TAG priority field when packets are
encapsulated for transmission on the tunnel.
The source priority… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.31 |
| hwMinMSIEgressPriorityTrustBTag Indicates that the destination priority of a service
instance is copied from the B-TAG priority.
It is used to set whether the I-TAG priority is copied from the B-TAG
priority … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.32 |
| hwMinMSIIngressDeiValue Indicates the source DEI of a service instance.
It is used to set the DEI field when packets are encapsulated for transmission
on the tunnel. When DEI is true, the value is set … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.33 |
| hwMinMSIEgressDeiTrustBDei Indicates that the destination DEI of a service instance
is copied from the B-DEI priority.
It is used to set whether the DEI of I-TAG is coped from B-DEI
when packets reach th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.34 |
| hwMinMSIIsolateAll Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is in… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.35 |
| hwMinMSIRowStatus Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.51 |