hwMinMProtectSwitchOperation

HUAWEI-MINM-MIB · .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21
MIB view Table view

Object

column r/w HWSwitchOperation 
Indicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the lock, force and manual commands, and WTR state on the local end. 
After the local commands are cleared, the WTR state cannot be entered.
lock(2): locks the services on the working tunnel.
force(3): forcibly switches the services to the protection tunnel when the protection tunnel is in sound state.
manual(4): forcibly switches the services to the protection channel when the working and the protection tunnel are in sound state. 
null(5):there is not manual commands.

Context

MIB
HUAWEI-MINM-MIB
OID
.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21
Type
column
Access
readwrite
Status
current
Parent
hwMinMMacTnlApsCfgEntry
Table
hwMinMMacTnlApsCfgTable
Siblings
12

Syntax

HWSwitchOperation
Source
HWSwitchOperation
Base type
Enumeration

Values & Constraints

Type Values
1clear
2lock
3force
4manual
5null

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMinMProtectMacTnlIndex
Indicates the index of ProtectMacTunnel. It begins with one.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.11
hwMinMProtectMacTnlName
Indicates the tunnel name of the protective mac-tunnel.
columnOctetString.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.12
hwMinMProtectMacTnlDMac
Indicates the remote MAC address of the protecting mac-tunnel.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.13
hwMinMProtectMacTnlBVlanID
Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094.
columnQ-BRIDGE-MIBVlanId.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.14
hwMinMProtectApsSwitchMode
Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels. oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends oneplusoneunidirection…
columnHWProtectMode.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.15
hwMinMProtectProtocolApsEnable
Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled. By default, the protocol is disabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.16
hwMinMProtectApsFastInterval
Indicates the configuration of fast sending time interval for each protection group. The time intervals for fast sending of Aps packets described in the G.8031 are as follows: By …
columnHWApsInterval.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.17
hwMinMProtectHoldoffTime
Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms. It ranges from 0 to 100. By default, the switchover restoration time is not delay…
columnInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18
hwMinMProtectRevMode
Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.19
hwMinMProtectRevWtrTime
Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels. By default, the switchover mode is restoration. The restoration ti…
columnInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.20
hwMinMProtectProtocol
Indicates the protection protocol of the protection group of mac-tunnels. ProtocolAPS(1): use an APS protocol to enhance the protection switching. ProtocolOAM(2): not using any AP…
columnHWProtectProtocol.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.22
hwMinMProtectRowStatus
Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.51