hwMinMSIL2CtrlProProcess

HUAWEI-MINM-MIB · .1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23
MIB view Table view

Object

column r/w Bits 
This configuration is unsuitable for the case of port+vlan+cos mapping. Layer 2 control packets of a service instance are handled as follows: By default, all layer 2 control packets are transmitted transparently and all bits are 0; if a bit is 1, it indicates that the packets of this protocol will be discarded.
If bit 0 is 1, it indicates that all layer 2 control packets will be discarded.
If bit 1 is 1, it indicates that the STP packets will be discarded.
If bit 2 is 1, it indicates that the LLAP packets will be discarded.
If bit 3 is 1, it indicates that the LACP packets will be discarded.
If bit 4 is 1, it indicates that the DOT3AH packets will be discarded.
If bit 5 is 1, it indicates that the DOTLAG packets will be discarded.

Context

MIB
HUAWEI-MINM-MIB
OID
.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.23
Type
column
Access
readwrite
Status
current
Parent
hwMinMSICfgEntry
Table
hwMinMSICfgTable
Siblings
26

Syntax

Bits

Values & Constraints

Enumerated Values
0all
1stp
2lldp
3lacp
4dot3ah
5dot1ag

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwMinMSIIndex
Indicates the Index of Service Instance.It begins with one.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.1
hwMinMSIID
Indicates the ID of a service instance. It can be any value within 24 bits. By default, the value is null. One ID can be configured to one service instance only.
columnInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.11
hwMinMSIName
Indicates the name of a service instance. It is a character string with a maximum of 31 bytes and a minimum of 1 byte.
columnOctetString.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.12
hwMinMSIServiceType
Indicates the type of a service instance as follows: p2p: indicates the type of a point-to-point service instance. mp2mp: indicates the type of a multi-point to multi-point servic…
columnHWServiceType.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.13
hwMinMSIPriorityTrust8021p
Indicates that the priority of user packet based on 802.1Q is trusted. By default, no user priority is trusted.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.14
hwMinMSIPriorityValue
Indicates priority level of a service instance. It is used to set the priority field of I-TAG. By default, no user priority is trusted and the priority is zero. The special value…
columnInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.15
hwMinMSIInterfaceType
Indicates the interface type of a service instance. transparent: indicates the transparent transmission mode. one-to-one: indicates the one-to-one in the s-tagged mode. bundling: …
columnHWInterfaceType.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.16
hwMinMSIAdminStatus
Indicates the administration status of a service instance.
columnHWAdminStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.17
hwMinMSIOperStatus
Indicates the physical status of a service instance.
columnHWOperStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.18
hwMinMSIMacLearningEnable
Disable the MAC learning of a service instance. By default, the MAC learning is enabled. This object applies to the service instance of mp2mp only. It is invalid in the service t…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.19
hwMinMSIMacLimitAction
Indicates MAC learning restriction of a service instance. After the number of MAC address entries reaches the limit, the system takes the following actions: discard: indicates tha…
columnHWProcessBehavior.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.20
hwMinMSIMacLimitAlarm
Indicates MAC learning restriction of a service instance. Indicates whether alarm should be sent after the number of MAC address entries reaches the limit as follows: disable: ind…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.21
hwMinMSIMacLimitMaxinum
Indicates MAC learning restriction of a service instance. The number of MAC addresses that can be learnt by the current service instance ranges from 0 to 131072. When the number i…
columnInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.22
hwMinMSIUnknownUnicastEnbale
Indicates how a service instance processes an unknown unicast packet. By default, the service instance is allowed to broadcast the unknown unicast packet. This object applies to …
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.24
hwMinMSIMulticastEnable
Indicates how a service instance processes an unknown multicast packet. By default, the service instance is allowed to broadcast the unknown multicast packet. This object applies…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.25
hwMinMSIBroadcastEnable
Indicates how a service instance processes a broadcast packet. By default, the service instance is allowed to forward the broadcast packet. This object applies to the mp2mp servi…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.26
hwMinMSIDescription
Indicates descriptive information of a service instance. Its length ranges from 1 to 80 bytes and the first byte cannot be a space.
columnOctetString.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.27
hwMinMSIStatisticsEnable
Indicates that the traffic statistics is enabled on a service instance.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.28
hwMinMSIStatisticsReset
Indicates the reset on traffic statistics of a service instance.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.29
hwMinMSIFcsTransparentEnable
The forwarded packets need to carry the CRC mark. By default, the forwarded packets do not carry the CRC mark.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.30
hwMinMSIIngressPriorityValue
Indicates the source priority of a service instance. It is used to set the I-TAG priority field when packets are encapsulated for transmission on the tunnel. The source priority…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.31
hwMinMSIEgressPriorityTrustBTag
Indicates that the destination priority of a service instance is copied from the B-TAG priority. It is used to set whether the I-TAG priority is copied from the B-TAG priority …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.32
hwMinMSIIngressDeiValue
Indicates the source DEI of a service instance. It is used to set the DEI field when packets are encapsulated for transmission on the tunnel. When DEI is true, the value is set …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.33
hwMinMSIEgressDeiTrustBDei
Indicates that the destination DEI of a service instance is copied from the B-DEI priority. It is used to set whether the DEI of I-TAG is coped from B-DEI when packets reach th…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.34
hwMinMSIIsolateAll
Indicates that all the mapping users of a service instance are isolated. By default, the isolation is disabled. This object applies to the service instance of mp2mp only. It is in…
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.35
hwMinMSIRowStatus
Indicates the RowStatus. The following three actions are used: active, createAndGo, destroy
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.133.1.1.3.2.1.51