hwMinMProtectHoldoffTime
HUAWEI-MINM-MIB ·
.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18
Object
column
r/w
Integer32
Indicates the switchover restoration time of Aps protection groups in the mac-tunnel, in 100 ms. It ranges from 0 to 100. By default, the switchover restoration time is not delayed. The value of delay is zero.
Context
- MIB
- HUAWEI-MINM-MIB
- OID
.1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwMinMMacTnlApsCfgEntry
- Table
- hwMinMMacTnlApsCfgTable
- Siblings
- 12
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMinMProtectMacTnlIndex Indicates the index of ProtectMacTunnel. It begins with one. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.11 |
| hwMinMProtectMacTnlName Indicates the tunnel name of the protective mac-tunnel. | column | OctetString | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.12 |
| hwMinMProtectMacTnlDMac Indicates the remote MAC address of the protecting mac-tunnel. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.13 |
| hwMinMProtectMacTnlBVlanID Indicates BVLAN value used by the protecting mac-tunnel: It ranges from 1 to 4094. | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.14 |
| hwMinMProtectApsSwitchMode Indicates the protection modes of the G.8031 Aps protection group of mac-tunnels.
oneplusonebidirectional(1): 1 + 1 switchover protection modes on both ends
oneplusoneunidirection… | column | HWProtectMode | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.15 |
| hwMinMProtectProtocolApsEnable Indicates that the G.8031 protocol of Aps protection group in the mac-tunnel is enabled.
By default, the protocol is disabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.16 |
| hwMinMProtectApsFastInterval Indicates the configuration of fast sending time interval for each protection group.
The time intervals for fast sending of Aps packets described in the G.8031 are as follows:
By … | column | HWApsInterval | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.17 |
| hwMinMProtectRevMode Indicates the non-restoration protection switchover mode of Aps protection group in mac-tunnels. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.19 |
| hwMinMProtectRevWtrTime Indicates the restoration time of restoration protection switchover mode of Aps protection group in mac-tunnels.
By default, the switchover mode is restoration. The restoration ti… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.20 |
| hwMinMProtectSwitchOperation Indicates the switchover commands for the Aps protection group of mac-tunnels.
The priority levels in a descending order are: clear, lock, force and manual.
clear(1): clears the l… | column | HWSwitchOperation | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.21 |
| hwMinMProtectProtocol Indicates the protection protocol of the protection group of mac-tunnels.
ProtocolAPS(1): use an APS protocol to enhance the protection switching.
ProtocolOAM(2): not using any AP… | column | HWProtectProtocol | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.22 |
| hwMinMProtectRowStatus Indicates the RowStatus.
The following three actions are used: active, createAndGo, destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.133.1.1.2.3.1.1.51 |