HH3C-DOT11-CFG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

327

hh3cDot11RadioPolicyTable

table

.1.3.6.1.4.1.25506.2.75.4.2.1 · 1 row entry · 11 columns

Open in standard view

The table defines the parameters for radio policy, as per
radio policy of CLI.
One radio policy could be assigned to the different radios (AP).

hh3cDot11RadioPolicyEntry entry .1.3.6.1.4.1.25506.2.75.4.2.1.1

Each entry contains information of each radio policy.

Indexes

hh3cDot11RadioPolicyName

Column Syntax OID

hh3cDot11RadioPolicyName

Represents the name of radio policy.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.2.1.1.1

hh3cDot11BeaconInterval

Represents the interval for Beacon management frame.

TUSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.2

hh3cDot11DtimInterval

Represents the number of beacon intervals that shall elapse
between transmission of Beacons frames containing a Traffic
Indication Map (TIM) element whose DTIM Count field is 0.
This value is transmitted in the Delivery…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.3

hh3cDot11RtsThreshold

Represents the current minimum size, in octets, of the MAC
protocol data unit (MPDU), below which a Request to send/Clear
to send (RTS/CTS) handshake shall not be performed.

byteSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.4

hh3cDot11FragThreshold

Represents the current maximum size, in octets, of the MPDU that
may be delivered to the PHY. A MSDU shall be broken into
fragments if its size exceeds the value of this attribute after
adding MAC headers and trailers.

byteSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.5

hh3cDot11ShortRetryThreshold

Represents the maximum number of transmission attempts of a
frame, the length of which is less than or equal to
hh3cDot11RTSThreshold, which shall be made before a failure
condition is indicated.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.6

hh3cDot11LongRetryThreshold

Represents the maximum number of transmission attempts of a
frame, the length of which is longer than hh3cDot11RTSThreshold,
that shall be made before a failure condition is indicated.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.7

hh3cDot11MaxRxLifetime

Represents the elapsed time. After the time specified by
hh3cDot11MaxRxLifetime, the further attempts to reassemble the
MSDU shall be terminated.

millisecondSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.75.4.2.1.1.8

hh3cDot11RdoPolicyRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.2.1.1.9

hh3cDot11RdoClientMaxCount

Represent the maximum number of stations supported by
this radio policy.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.10

hh3cDot11BeaconIntervalMs

Represents the interval for Beacon management frame.

msSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.1.1.11

hh3cDot11ServicePolicyTable

table

.1.3.6.1.4.1.25506.2.75.4.2.2 · 1 row entry · 34 columns

Open in standard view

The table defines the parameters for ESS, as per service policy
of CLI.
One service policy could be assigned to the different radios
(AP).

hh3cDot11ServicePolicyEntry entry .1.3.6.1.4.1.25506.2.75.4.2.2.1

Each entry contains information of each service policy.

Indexes

hh3cDot11ServicePolicyID

Column Syntax OID

hh3cDot11ServicePolicyID

Represents the ID of each service policy.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.2.2.1.1

hh3cDot11SSIDName

Represents the ESS. As per CLI, the value of
service policy name will be SSID.

HH3C-DOT11-REF-MIBHh3cDot11SSIDStringTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11SSIDStringType OctetString

.1.3.6.1.4.1.25506.2.75.4.2.2.1.2

hh3cDot11SSIDHidden

This attribute controls whether the SSID will be advertised in
the beacon frame.
If it is true, then SSID will not be advertised in the beacon
frame.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.2.1.3

hh3cDot11AuthenMode

Represents the Authentication mode defined by 802.11.

HH3C-DOT11-REF-MIBHh3cDot11AuthenTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11AuthenType Enumeration

Type Values:

1	none
2	opensystem
3	sharedkey
4	all

.1.3.6.1.4.1.25506.2.75.4.2.2.1.4

hh3cDot11SSIDEncryptionMode

Represents the encryption mode for this ESS.

HH3C-DOT11-REF-MIBHh3cDot11SSIDEncryptModeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11SSIDEncryptModeType Enumeration

Type Values:

1	cleartxt
2	cipher
3	ext

.1.3.6.1.4.1.25506.2.75.4.2.2.1.5

hh3cDot11WlanInfBindingType

Represents the service policy will bind to what kind of
data forwarding interface.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.2.2.1.6

hh3cDot11WlanInfBindingID

Represents the interface ID of the interface that ESS will
bind to.
If the value is set to -1, the binding will be removed.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.7

hh3cDot11SrvPolicyRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.2.2.1.8

hh3cDot11ClientMaxCount

Represent the maximum number of stations supported by
this service policy.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.9

hh3cDot11SPInCirMode

CIR(committed information rate) mode of inbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR will be reset.

HH3C-DOT11-REF-MIBHh3cDot11CirModer/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11CirMode Enumeration

Type Values:

1	static
2	dynamic

.1.3.6.1.4.1.25506.2.75.4.2.2.1.10

hh3cDot11SPInCirValue

Represents the CIR of inbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode is meaningless.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.11

hh3cDot11SPOutCirMode

CIR(committed information rate) mode of outbound direction.
This object is useful only when the corresponding CIR is nonzero.
If value of this object is changed, corresponding CIR will be reset.

HH3C-DOT11-REF-MIBHh3cDot11CirModer/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11CirMode Enumeration

Type Values:

1	static
2	dynamic

.1.3.6.1.4.1.25506.2.75.4.2.2.1.12

hh3cDot11SPOutCirValue

Represents the CIR of outbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode is meaningless.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.13

hh3cDot11WlanInfPVID

Represents the VLAN ID of SSID.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.14

hh3cDot11SPInCirStaticValue

Represents the CIR of inbound direction for static CIR mode.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.15

hh3cDot11SPOutCirStaticValue

Represents the CIR of outbound direction for static CIR mode.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.16

hh3cDot11SPIsolate

If it is true, then stations connected with the service policy are
isolated.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.2.1.17

hh3cDot11WlanexAuthServerIP

Represents the IP address of the Wlanex Authentication server

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.75.4.2.2.1.18

hh3cDot11SPBeaconMeasEnable

If it is true, then beacon-measurement is enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.2.1.19

hh3cDot11SPBeaconMeasType

Represents what the work mode for BeaconMeasurement type.
The following values are supported:
passive, - BeaconMeasurement will use the passive type.
active - BeaconMeasurement will use the active type.
beac…

Enumerationr/w

Enumerated Values:

1	passive
2	active
3	beaconTable

.1.3.6.1.4.1.25506.2.75.4.2.2.1.20

hh3cDot11SPBeaconMeasInterval

Represents the beacon-measurement interval.

secondInteger32r/w

Constraints:
range: 10-200

.1.3.6.1.4.1.25506.2.75.4.2.2.1.21

hh3cDot11AuthenModeCM

Represents the Authentication mode defined by 802.11.

Enumerationr/w

Enumerated Values:

0	opensystem
1	sharedkey

.1.3.6.1.4.1.25506.2.75.4.2.2.1.22

hh3cDot11SecIEStatusCM

To enable the security Information element in the beacon and
probe response frames sent by AP.

Enumerationr/w

Enumerated Values:

0	none
1	wpa
2	wpa2
3	wlanex

.1.3.6.1.4.1.25506.2.75.4.2.2.1.23

hh3cDot11SecurityCiphersCM

The WLAN system support the following cipher type for data frame
encryption.
none
wep40
wep104
tkip
aesccmp
wpi-SMS4
When the value of node equals to zero, it means no configuration or
undo operation.

Enumerationr/w

Enumerated Values:

0	none
1	wep40
2	wep104
3	tkip
4	aesccmp
5	wpisms4

.1.3.6.1.4.1.25506.2.75.4.2.2.1.24

hh3cDot11SrvPolicyStatusCM

The status of the Service Policy.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.25506.2.75.4.2.2.1.25

hh3cDot11SSIDHiddenCM

This attribute controls whether the SSID will be advertised in
beacon frames.
If it is dot11true, the SSID will not be advertised in beacon
frames.

HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TruthValueCM Enumeration

Type Values:

0	dot11false
1	dot11true

.1.3.6.1.4.1.25506.2.75.4.2.2.1.26

hh3cDot11SPIsolateCM

If it is dot11true, the clients connected with the service policy are
isolated to each other.

HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TruthValueCM Enumeration

Type Values:

0	dot11false
1	dot11true

.1.3.6.1.4.1.25506.2.75.4.2.2.1.27

hh3cDot11FwdVlanBitMapLow

Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through 8,
the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents…

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.25506.2.75.4.2.2.1.28

hh3cDot11FwdVlanBitMapHigh

OctetStringr/w

Constraints:
range: 0-256

.1.3.6.1.4.1.25506.2.75.4.2.2.1.29

hh3cDot11ServicePolicyName

Represents the name of each service policy.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.2.2.1.30

hh3cDot11SecurityModeCM

Determines the security modes of the WLAN port.

none - The default value. No security mode is set.

psk - Access to the port is denied until the port client is
authorized (by 802.1X key ne…

Enumerationr/w

Enumerated Values:

0	none
1	psk
2	radius
3	wlanex

.1.3.6.1.4.1.25506.2.75.4.2.2.1.31

hh3cDot11SPInCbsValue

Represents the CBS of inbound direction of this service policy.
If the value is 0, it means that the CBS is automatically calculated
from the value of CIR.

byteSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.32

hh3cDot11SPOutCbsValue

Represents the CBS of outbound direction of this service policy.
If the value is 0, it means that the CBS is automatically calculated
from the value of CIR.

byteSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.33

hh3cDot11WlanInfCustomerPVID

Represents the customer PVID.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.2.1.34

hh3cDot11ServicePolicyExtTable

table

.1.3.6.1.4.1.25506.2.75.4.2.3 · 1 row entry · 9 columns

Open in standard view

The table defines the parameters for ESS, as per service policy
of CLI.
When the value of hh3cDot11SSIDEncryptionMode equals to cipher(2),
more configuration for a ESS will be put into the table.

hh3cDot11ServicePolicyExtEntry entry .1.3.6.1.4.1.25506.2.75.4.2.3.1

Each entry contains information of each service policy under cipher(2)
mode.

Indexes

hh3cDot11ServicePolicyExtID

Column Syntax OID

hh3cDot11ServicePolicyExtID

Represents the ID of each service policy.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.2.3.1.1

hh3cDot11SecIEStatus

To enable the security Information element in the beacon and
probe response frames sent by AP.

HH3C-DOT11-REF-MIBHh3cDot11SecIEStatusTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11SecIEStatusType Enumeration

Type Values:

1	none
2	rsn
3	wpa
4	all
5	ext

.1.3.6.1.4.1.25506.2.75.4.2.3.1.2

hh3cDot11SecurityCiphers

The WLAN system support the following cipher type for data frame
encryption.
wep40(2)
tkip(4)
aesccmp(16)
wep104(32)
wpisms4(64)
wep128(128)
For each service policy, it could support multiple cipher types at
the same ti…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.3.1.3

hh3cDot11CipherKeyIndex

Represents the key index of cipher key for packet.
When hh3cDot11SecurityCiphers value is wep40 or wep104,
the configuration will take effective.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.3.1.4

hh3cDot11CipherKey

Represents the cipher key for packet.
When hh3cDot11SecurityCiphers value is wep40 or wep104,
the configuration will take effective.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.2.3.1.5

hh3cDot11SrvPolicyExtRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.2.3.1.6

hh3cDot11CipherKeyType

Represents the cipher key type of hh3cDot11CipherKey.

Enumerationr/w

Enumerated Values:

1	char
2	hex

.1.3.6.1.4.1.25506.2.75.4.2.3.1.7

hh3cDot11AkmMode

The authentication and key management mode.

Enumerationr/w

Enumerated Values:

0	none
1	dot1x
2	psk

.1.3.6.1.4.1.25506.2.75.4.2.3.1.8

hh3cDot11PskKey

Represents the preshared key. This configuration takes effect
if the hh3cDot11AkmMode value is psk.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.2.3.1.9

hh3cDot11RadioPolicyExtTable

table

.1.3.6.1.4.1.25506.2.75.4.2.4 · 1 row entry · 10 columns

Open in standard view

The table defines the radio policy of each radio.
It can't be modified if the radio policy is a default radio policy.

hh3cDot11RadioPolicyExtEntry entry .1.3.6.1.4.1.25506.2.75.4.2.4.1

Each entry contains information of each radio policy.

Indexes

hh3cDot11RPAPSerialID hh3cDot11RPRadioID

Column	Syntax	OID
hh3cDot11RPAPSerialID This object represents the Serial ID of AP.	OctetString Constraints: `range: 0-127`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.1`
hh3cDot11RPRadioID This object represents each radio.	HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType `Integer32`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.2`
hh3cDot11RPBeaconInterval This object represents the interval for Beacon management frame.	millisecondsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.3`
hh3cDot11RPDtimInterval This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.4`
hh3cDot11RPRtsThreshold This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	byteSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.5`
hh3cDot11RPFragThreshold This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers a…	byteSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.6`
hh3cDot11RPShortRetryThreshold This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to hh3cDot11RTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.7`
hh3cDot11RPLongRetryThreshold This object represents the maximum number of transmission attempts of a frame, the length of which is longer than hh3cDot11RTSThreshold, and that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.8`
hh3cDot11RPClientMaxCount This object represents the maximum number of stations supported by this radio policy.	Integer32r/w Constraints: `range: 0-2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.9`
hh3cDot11RPBeaconIntervalCM This object represents beacon interval.	timeunitSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.2.4.1.10`

hh3cDot11SrvPortSecurityTable

table

.1.3.6.1.4.1.25506.2.75.4.2.5 · 1 row entry · 6 columns

Open in standard view

This table defines the WLAN security status for ESS, BSS and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
hh3cPortSecurityTables should be used to configure port security.

hh3cDot11SrvPortSecurityEntry entry .1.3.6.1.4.1.25506.2.75.4.2.5.1

There is a row in this table for service policy.

Indexes

hh3cDot11SecurityServicePolicyID

Column Syntax OID

hh3cDot11SecurityServicePolicyID

Represents the ID of each service policy.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.2.5.1.1

hh3cDot11SrvPortSecurityMode

Determines the security modes of the WLAN port.

noRestrictions The default value, no any security mode is set.

userLoginSecureExt Access to the port is denied until the port
client is aut…

Enumerationr/w

Enumerated Values:

1	noRestrictions
2	userLoginSecureExt
3	psk
4	macAddressAndPsk
5	userLoginSecureExtOrPsk
6	ext

.1.3.6.1.4.1.25506.2.75.4.2.5.1.2

hh3cDot11SrvSecurityKeyType

This indicates the key type in the 802.1X EAPOL_Key packet.

userLoginTxKeyTypeNone - This means the key type is not set yet.

userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.…

Enumerationr/w

Enumerated Values:

1	userLoginTxKeyTypeNone
2	userLoginTxKeyTypeDot11Key
3	userLoginTxKeyTypeRsaRC4Key

.1.3.6.1.4.1.25506.2.75.4.2.5.1.3

hh3cDot11SrvSecurityPskKeyMode

This is the password input mode. When input as pskKeyModePassPhrase,
hh3cDot11SrvSecurityPskKeyString must be 8 to 63 characters;
when input as pskKeyModeRawKey, hh3cDot11SrvSecurityPskKeyString
must be 64 characters a…

Enumerationr/w

Enumerated Values:

1	pskKeyModeNone
2	pskKeyModePassPhrase
3	pskKeyModeRawKey

.1.3.6.1.4.1.25506.2.75.4.2.5.1.4

hh3cDot11SrvSecurityPskKeyString

This is the password string used for psk authentication.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.25506.2.75.4.2.5.1.5

hh3cDot11SrvPortSecurityModeCM

Determines the security modes of the WLAN port.

none - The default value, no any security mode is set.

psk - Access to the port is denied until the port client is
authorized (by 802.1X ke…

Enumerationr/w

Enumerated Values:

0	none
1	psk
2	radius
3	wlanex

.1.3.6.1.4.1.25506.2.75.4.2.5.1.6

hh3cDot11SrvPolicyExtendTable

table

.1.3.6.1.4.1.25506.2.75.4.2.6 · 1 row entry · 1 columns

Open in standard view

The table defines the parameters of each service policy.

hh3cDot11SrvPolicyExtendEntry entry .1.3.6.1.4.1.25506.2.75.4.2.6.1

Each entry contains information of each service policy.

Indexes

hh3cDot11ServicePolicyID

Column Syntax OID

hh3cDot11SPEnable

Represents whether the service policy is enabled.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.75.4.2.6.1.1

hh3cDot11SrvL2AuthenTable

table

.1.3.6.1.4.1.25506.2.75.4.2.7 · 1 row entry · 18 columns

Open in standard view

This table defines the Layer 2 authentication status of service
templates.

hh3cDot11SrvL2AuthenEntry entry .1.3.6.1.4.1.25506.2.75.4.2.7.1

There is a row for a service template.

Indexes

hh3cDot11SrvL2AuthenID

Column Syntax OID

hh3cDot11SrvL2AuthenID

Represents the ID of a service template.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.2.7.1.1

hh3cDot11L2AuthenMode

Authentication mode of the service template.

bypass No authentication is required.

macAuthentication MAC authentication.

macThenDot1xAuthentication MAC authentication is e…

Enumerationr/w

Enumerated Values:

1	bypass
2	macAuthentication
3	macThenDot1xAuthentication
4	dot1xAuthentication
5	dot1xThenMacAuthentication
6	ouiThenDot1x
7	macAndDot1x

.1.3.6.1.4.1.25506.2.75.4.2.7.1.2

hh3cDot11L2IntrusProtectEnable

Enables intrusion protection for the service template.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.3

hh3cDot11L2IntrusProtectOpt

Operation mode when intrusion is detected.

Enumerationr/w

Enumerated Values:

1	blockMACTemporarily
2	stopServiceTemporarily
3	stopService

.1.3.6.1.4.1.25506.2.75.4.2.7.1.4

hh3cDot11TempServiceStopTimer

Time period for temporarily stopping service.

Integer32r/w

Constraints:
range: 10-300

.1.3.6.1.4.1.25506.2.75.4.2.7.1.5

hh3cDot11TempBlockMACTimer

Time period for temporarily blocking user MACs.

Integer32r/w

Constraints:
range: 60-300

.1.3.6.1.4.1.25506.2.75.4.2.7.1.6

hh3cDot11L2IgnoreAuthorization

Ignores all authorization information set by the server.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.7

hh3cDot11L2FailVLAN

VLAN for authentication failure. 0 means not configured.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.25506.2.75.4.2.7.1.8

hh3cDot11L2CriticalVLAN

VLAN for server unavailability situation. 0 means not configured.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.25506.2.75.4.2.7.1.9

hh3cDot11L2AuthorFailOffline

Users are logged off if authorization fails.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.10

hh3cDot11L2AccountFailOffline

Users are logged off if accounting fails.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.11

hh3cDot11Dot1xHSEnable

Enables 802.1X handshake.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.12

hh3cDot11Dot1xSecureHSEnable

Enables secure 802.1X handshake.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.13

hh3cDot11Dot1xReauthenEnable

Enables 802.1X reauthentication.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.7.1.14

hh3cDot11Dot1xMandatoryDomain

802.1X authentication domain of users for the service template.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.2.7.1.15

hh3cDot11Dot1xMaxUserCount

Maximum number of 802.1X users supported by the BSS bound to the service
template.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.7.1.16

hh3cDot11MACAuthenDomain

MAC authentication domain of users for the service template.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.2.7.1.17

hh3cDot11MACAuthenMaxUserCount

Maximum number of MAC authentication users supported by the BSS bound to
the service template.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.2.7.1.18

hh3cDot11IPLearningTable

table

.1.3.6.1.4.1.25506.2.75.4.2.8 · 1 row entry · 5 columns

Open in standard view

The table specifies the IP learning type and status
of service templates.

hh3cDot11IPLearningEntry entry .1.3.6.1.4.1.25506.2.75.4.2.8.1

Each entry contains information about an IP learning entry.

Indexes

hh3cDot11IPLearningServiceName hh3cDot11IPLearningType

Column Syntax OID

hh3cDot11IPLearningServiceName

Represents the service name.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.25506.2.75.4.2.8.1.1

hh3cDot11IPLearningType

Represents the IP learning type.

Enumeration

Enumerated Values:

1	invalid
2	arp
3	dhcp
4	dhcp6
5	nd

.1.3.6.1.4.1.25506.2.75.4.2.8.1.2

hh3cDot11IPLearningStatus

Represents the ip learning status of the interface.
Setting this attribute to true enables IP learning on the interface.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.2.8.1.3

hh3cDot11IPLearningVlanBitMapL

Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through 8 and
the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represe…

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.25506.2.75.4.2.8.1.4

hh3cDot11IPLearningVlanBitMapH

OctetStringr/w

Constraints:
range: 1-256

.1.3.6.1.4.1.25506.2.75.4.2.8.1.5

hh3cDot11APTemplateTable

table

.1.3.6.1.4.1.25506.2.75.4.3.1 · 1 row entry · 37 columns

Open in standard view

By AP template CLI, administrator will configure the parameters of AP
by convenience.
Before AP boot up and connect to AC by CAPWAP tunnel, administrator
will create AP template for each AP.  When AP connect to AC,
AC will assign configuration to AP by hh3cDot11APSerialID
information in AP template.

hh3cDot11APTemplateEntry entry .1.3.6.1.4.1.25506.2.75.4.3.1.1

Each entry contains configuration information for each AP.

Indexes

hh3cDot11APTemplateName

Column Syntax OID

hh3cDot11APTemplateName

Represents the name of AP template.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.3.1.1.1

hh3cDot11APSerialID

Represents AP serial id.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.2

hh3cDot11TemplateAPModelAlias

Represents the alias of AP model name.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.3

hh3cDot11Description

This attribute will give more information about AP.
Administrator could suggest the location, owner or
other information for each AP.
If the value is set to NULL, the description will be removed.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.4

hh3cDot11APWorkMode

Represents what work mode for AP.
The following values are supported:
normal - AP will supply WLAN service.
monitor - AP will be a monitor to find attack.
hybrid - AP will supply WLAN service and Device de…

Enumerationr/w

Enumerated Values:

1	normal
2	monitor
3	hybrid

.1.3.6.1.4.1.25506.2.75.4.3.1.1.5

hh3cDot11APTemplateRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.3.1.1.6

hh3cDot11APName

Represents the AP name.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.7

hh3cDot11StatisInterv

Represents the interval of radio statistic.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.8

hh3cDot11APBroadcastProbeReply

Represents enable the AP to reply broadcast probe or not.
'true' : The AP to reply broadcast probe is enabled.
'false': The AP to reply broadcast probe is disabled

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.1.1.9

hh3cDot11StaIdleTimerInterv

Represents the interval for which the link between AP and STA
( power-save or awake ) can be idle.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.10

hh3cDot11StaKeepAliveTimerInterv

Represents the interval of the keep alive requests sent between
AP and STA.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.11

hh3cDot11APCir

Represents the committed information rate between AP and AC.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.12

hh3cDot11APCbs

Represents the committed burst size between AP and AC.

BytesSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.13

hh3cDot11APPriorityLevel

This object represents the connection priority for the AP.
If the connection priority is 7, the AC is considered as the
primary AC for the AP.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.25506.2.75.4.3.1.1.14

hh3cDot11APElementID

This object represents the AP element ID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.15

hh3cDot11APDevDetectEnable

Represents whether device detection is enabled or not.
'true' : Device detection is enabled.
'false': Device detection is disabled.
If device detection is enabled, the AP will provide both device
detection and WLAN data…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.1.1.16

hh3cDot11APGetIPMethod

This object represents the method how AP gets IP address.

Enumerationr/w

Enumerated Values:

1	dhcpAlloc
2	static

.1.3.6.1.4.1.25506.2.75.4.3.1.1.17

hh3cDot11StatisIntervMode

This object represents the mode of statics interval.
normal - statics interval value between 10s to 240s
realtime - statics interval value between 0s to 5s

Enumerationr/w

Enumerated Values:

1	normal
2	realtime

.1.3.6.1.4.1.25506.2.75.4.3.1.1.18

hh3cDot11ApTrapEnabled

Represents whether the trap status is enabled or not.
'true' : Enable the trap status;
'false' : Disable the trap status.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.1.1.19

hh3cDot11ApFmwUpdState

Represents the status of version auto-update for an AP.
The following values are supported:
enable - AP version will be updated automatically.
disable - AP version will not be updated automatically.
inherit - The st…

Enumerationr/w

Enumerated Values:

1	enable
2	disable
3	inherit

.1.3.6.1.4.1.25506.2.75.4.3.1.1.20

hh3cDot11StatisIntervModeCM

This object represents the mode of statistic interval.
off - statistic interval value between 10s to 240s
on - statistic interval value between 0s to 5s

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.25506.2.75.4.3.1.1.21

hh3cDot11ApNasIDCM

Represents the NAS-ID of current service policy for each
specific radio of AP.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.22

hh3cDot11ApCoveragetype

This object represents the coverage type of AP.
school - the coverage type is school
traffic - the coverage type is traffic
shop - the coverage type is shop
company - the coverage type is company

Enumerationr/w

Enumerated Values:

1	school
2	traffic
3	shopping
4	company

.1.3.6.1.4.1.25506.2.75.4.3.1.1.23

hh3cDot11APControlAddressState

Represents the status of control address for an AP.
The following values are supported:
enable - AC rediscovery will be enabled.
disable - AC rediscovery will be disabled.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.75.4.3.1.1.24

hh3cDot11APControlAddressIPv4

Represents an AC IPv4 address for AC rediscovery.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.75.4.3.1.1.25

hh3cDot11APControlAddressIPv6

Represents an AC IPv6 address for AC rediscovery.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.26

hh3cDot11APLocalACName

Represents the local AC name the AP belongs to.

OctetString

.1.3.6.1.4.1.25506.2.75.4.3.1.1.27

hh3cDot11APEchoInterval

This object represents the echo-interval of the AP.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.1.1.28

hh3cDot11APProvisionAPIPv4

Represents the IPv4 address of an AP.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.75.4.3.1.1.29

hh3cDot11APProvisionIPv4Mask

Represents the IPv4 address mask of an AP.

Integer32r/w

Constraints:
range: 1-31

.1.3.6.1.4.1.25506.2.75.4.3.1.1.30

hh3cDot11APProvisionAPIPv6

Represents the IPv6 address of an AP.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.31

hh3cDot11APProvisionIPv6PrefixLen

Represents the IPv6 address prefix length of an AP.

Integer32r/w

Constraints:
range: 1-128

.1.3.6.1.4.1.25506.2.75.4.3.1.1.32

hh3cDot11APProvisionACIPv4

Represents an AC IPv4 address for discovery.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.75.4.3.1.1.33

hh3cDot11APProvisionACIpv6

Represents an AC IPv6 address for discovery.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.34

hh3cDot11APProvisionGateWayIPV4

Represents the gateway IPv4 address for an AP.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.75.4.3.1.1.35

hh3cDot11APProvisionGateWayIPV6

Represents thre gateway IPv6 address for an AP.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.36

hh3cDot11APMapConfigFileName

Represents the name of the AP MapConfigFile.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.1.1.37

hh3cDot11RadioToConfigTable

table

.1.3.6.1.4.1.25506.2.75.4.3.2 · 1 row entry · 32 columns

Open in standard view

Before AP connects to AC, administrator will configure radio
parameter to each radio.

hh3cDot11RadioToConfigEntry entry .1.3.6.1.4.1.25506.2.75.4.3.2.1

Each entry contains configuration information for each radio.

Indexes

hh3cDot11APTemplateNameCfg hh3cDot11CfgRadioID

Column Syntax OID

hh3cDot11APTemplateNameCfg

Represents the name of AP template.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.3.2.1.1

hh3cDot11CfgRadioID

Represents each radio.

HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.2.1.2

hh3cDot11CfgRadioPolicyName

Represents the name of radio policy.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.2.1.3

hh3cDot11CfgRadioType

Represents the radio will work with which 802.11 radio type.

HH3C-DOT11-REF-MIBHh3cDot11RadioTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11n
16	dot11gn
32	dot11an
64	dot11ac
128	dot11gac
256	dot11ax
512	dot11gax

.1.3.6.1.4.1.25506.2.75.4.3.2.1.4

hh3cDot11CfgChannel

Represents the channel allocation of radio.

HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.2.1.5

hh3cDot11CfgMaxTxPowerLevel

Represents the maximal transmit power scope for AP.

dbmHH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.2.1.6

hh3cDot11PreambleLen

Represents whether use long or short preamble for 802.11 MAC
frame.
When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn,
then value for hh3cDot11PreambleLen will be valid.
Otherwise, the value for it will be …

HH3C-DOT11-REF-MIBHh3cDot11PreambleTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11PreambleType Enumeration

Type Values:

1	long
2	short

.1.3.6.1.4.1.25506.2.75.4.3.2.1.7

hh3cDot11CfgRadioStatus

Represents the radio admin status whether is enabled
or disabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.8

hh3cDot11CfgRdElementID

Represents the element ID of this radio. It comprises two parts.
The highest 24 bits are AP element ID and the lowest 8 bits are
radio ID.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.75.4.3.2.1.9

hh3cDot11CfgWorkMode

Represents work mode of the radio.

HH3C-DOT11-REF-MIBHh3cDot11WorkModer/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11WorkMode Enumeration

Type Values:

1	normal
2	monitor
3	hybrid

.1.3.6.1.4.1.25506.2.75.4.3.2.1.10

hh3cDot11CfgPwrAttValue

Represents the value of power attenuation.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.2.1.11

hh3cDot11RadioTxArithmetic

Represents the transmission arithmetic of the radio.
The following values are supported:
quality - Consider the quality first during the transmission.
bandwidth - Consider the bandwidth first during the transmission.

Enumerationr/w

Enumerated Values:

1	quality
2	bandwidth

.1.3.6.1.4.1.25506.2.75.4.3.2.1.12

hh3cDot11CfgChannelLockStat

Represents locked status of channel on the radio.

Enumerationr/w

Enumerated Values:

1	unlocked
2	locked

.1.3.6.1.4.1.25506.2.75.4.3.2.1.13

hh3cDot11CfgPowerLockStat

Represents locked status of power on the radio.

Enumerationr/w

Enumerated Values:

1	unlocked
2	locked

.1.3.6.1.4.1.25506.2.75.4.3.2.1.14

hh3cDot11CfgLBRdGroupId

Represents the load balance group ID allocated for the radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.75.4.3.2.1.15

hh3cDot11CfgRRMSDRdGroupId

Represents the RRM self-decisive group ID allocated for the radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.75.4.3.2.1.16

hh3cDot11CfgRadioType2

Represents the radio will work with which 802.11 radio type.

HH3C-DOT11-REF-MIBHh3cDot11RadioType2r/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType2 Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11an
16	dot11gn
32	dot11ac
64	dot11gac
128	dot11ax
256	dot11gax

.1.3.6.1.4.1.25506.2.75.4.3.2.1.17

hh3cDot11CfgIDSEnable

Represents whether intrusion detection is enabled for this radio.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.18

hh3cDot11CfgSaEnable

Represents whether spectrum analysis is enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.19

hh3cDot11CfgSaCltRtFFTData

Represents whether to collect real-time FFT data for this radio.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.20

hh3cDot11CfgSaBand

Represents which band of channels will be monitored when collection
real-time FFT data is enabled for this radio. Detection of
interference devices and air quality will also be affected. Each band
responds to the foll…

Enumerationr/w

Enumerated Values:

1	dot11g
2	dot11aLower
3	dot11aMiddle
4	dot11aUpper

.1.3.6.1.4.1.25506.2.75.4.3.2.1.21

hh3cDot11CfgSaRptDevType

Represents which types of interference devices should be reported.

Bitsr/w

Enumerated Values:

0	microwave
1	microwaveInverter
2	bluetooth
3	fixedFreqOthers
4	fixedFreqCordlessPhone
5	fixedFreqVideo
6	fixedFreqAudio
7	freqHopperOthers
8	freqHopperCordlessBase
9	freqHopperCordlessNetwork
10	freqHopperXbox
11	genericInterferer

.1.3.6.1.4.1.25506.2.75.4.3.2.1.22

hh3cDot11CfgSaTrapDevEnable

Represents whether trap is enabled for an interference device type.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.23

hh3cDot11CfgSaTrapDevType

Represents for which interference device types the AP will send traps
when trap sending is enabled.

Bitsr/w

Enumerated Values:

0	microwave
1	microwaveInverter
2	bluetooth
3	fixedFreqOthers
4	fixedFreqCordlessPhone
5	fixedFreqVideo
6	fixedFreqAudio
7	freqHopperOthers
8	freqHopperCordlessBase
9	freqHopperCordlessNetwork
10	freqHopperXbox
11	genericInterferer

.1.3.6.1.4.1.25506.2.75.4.3.2.1.24

hh3cDot11CfgSaTrapAQEnable

Represents whether the channel quality trap is enabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.25

hh3cDot11CfgSaTrapAQThreshold

Represents the channel quality threshold. When the channel quality
is below this value, the channel quality trap will be sent.

Integer32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.25506.2.75.4.3.2.1.26

hh3cDot11CfgSaDrivenRRMEnable

Configures whether to run RRM when the AP detects
a certain level of interference.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.2.1.27

hh3cDot11CfgSaDrivenRRMSnt

Configures the threshold for triggering RRM. When the
interference level for the AP exceeds the threshold
, RRM initiates local dynamic frequency selection (DFS)
and changes the channel of the affected radio
to improve…

Enumerationr/w

Enumerated Values:

1	low
2	medium
3	high

.1.3.6.1.4.1.25506.2.75.4.3.2.1.28

hh3cDot11CfgSPInCirMode

Specifies the committed information rate(CIR) mode for the inbound direction.
This object is useful only when the corresponding CIR has a nonzero value.
If the value of this object is changed, the corresponding CIR will…

HH3C-DOT11-REF-MIBHh3cDot11CirModer/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11CirMode Enumeration

Type Values:

1	static
2	dynamic

.1.3.6.1.4.1.25506.2.75.4.3.2.1.29

hh3cDot11CfgSPInCirValue

Represents the CIR for the inbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode is meaningless.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.2.1.30

hh3cDot11CfgSPOutCirMode

Represents the committed information rate(CIR) mode for the outbound direction.
This object is useful only when the corresponding CIR has a nonzero value.
If the value of this object is changed, the corresponding CIR wi…

HH3C-DOT11-REF-MIBHh3cDot11CirModer/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11CirMode Enumeration

Type Values:

1	static
2	dynamic

.1.3.6.1.4.1.25506.2.75.4.3.2.1.31

hh3cDot11CfgSPOutCirValue

Represents the CIR for the outbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR mode is meaningless.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.2.1.32

hh3cDot11APServiceSetTable

table

.1.3.6.1.4.1.25506.2.75.4.3.3 · 1 row entry · 4 columns

Open in standard view

For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.

hh3cDot11APServiceSetEntry entry .1.3.6.1.4.1.25506.2.75.4.3.3.1

Each entry contains service policy information for each
specific radio of AP.

Indexes

hh3cDot11APTemplateNameCfg hh3cDot11CfgRadioID hh3cDot11CfgServicePolicyID

Column Syntax OID

hh3cDot11CfgServicePolicyID

Represents the ID of each service policy used by the AP.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.3.1.1

hh3cDot11SrvSetRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.3.3.1.2

hh3cDot11ServiceSetVlanId

Represents the Vlan ID of BSS which is generated when service policy
is binded with the Radio.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.25506.2.75.4.3.3.1.3

hh3cDot11ServiceSetVlanGroup

Represents the VLAN group of the BSS generated when a service policy
is bound to the radio.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.25506.2.75.4.3.3.1.4

hh3cDot11APSysInfoSetTable

table

.1.3.6.1.4.1.25506.2.75.4.3.4 · 1 row entry · 3 columns

Open in standard view

The table of the system information for each AP.

hh3cDot11APSysInfoSetEntry entry .1.3.6.1.4.1.25506.2.75.4.3.4.1

The system information configuration for each AP.

Indexes

hh3cDot11SIDAPSerialID

Column	Syntax	OID
hh3cDot11APSysNetID Represents the system Net ID for AP.	OctetStringr/w Constraints: `range: 0-127`	`.1.3.6.1.4.1.25506.2.75.4.3.4.1.1`
hh3cDot11APCpuUsageThreshold The CPU usage threshold for AP.	onepercentInteger32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.25506.2.75.4.3.4.1.2`
hh3cDot11APMemUsageThreshold The memory usage threshold for AP.	onepercentInteger32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.25506.2.75.4.3.4.1.3`

hh3cDot11APLimitTable

table

.1.3.6.1.4.1.25506.2.75.4.3.5 · 1 row entry · 3 columns

Open in standard view

For each connected APs, administrator could configure a series of
limits.  This table describes the limit information for AP(s).

hh3cDot11APLimitEntry entry .1.3.6.1.4.1.25506.2.75.4.3.5.1

Each entry contains the limit information for each AP.

Indexes

HH3C-DOT11-REF-MIBhh3cDot11APElementIndex

Column	Syntax	OID
hh3cDot11APSsidNumLimit Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25506.2.75.4.3.5.1.1`
hh3cDot11APUserCntLimit Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25506.2.75.4.3.5.1.2`
hh3cDot11APUserThreshold Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has…	Integer32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.25506.2.75.4.3.5.1.3`

hh3cDot11APIfSetTable

table

.1.3.6.1.4.1.25506.2.75.4.3.6 · 1 row entry · 2 columns

Open in standard view

The table of the interface information for each AP.

hh3cDot11APIfSetEntry entry .1.3.6.1.4.1.25506.2.75.4.3.6.1

The interface information configuration for each AP.

Indexes

HH3C-DOT11-REF-MIBhh3cDot11APElementIndex hh3cDot11APSetIfIndex

Column	Syntax	OID
hh3cDot11APSetIfIndex Represents the index for a interface.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.25506.2.75.4.3.6.1.1`
hh3cDot11APIfAlias This object is an 'alias' name for the interface as specified by a network manager for AP.	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.25506.2.75.4.3.6.1.2`

hh3cDot11APServiceVlanTable

table

.1.3.6.1.4.1.25506.2.75.4.3.7 · 1 row entry · 4 columns

Open in standard view

For all the radios on the AP, it could configure multiple service policies.
The table describes the relationship between AP and
service policies.

hh3cDot11APServiceVlanEntry entry .1.3.6.1.4.1.25506.2.75.4.3.7.1

Each entry contains service policy information for each AP.

Indexes

hh3cDot11APServiceVlanSerialID hh3cDot11APServiceVlanSPID

Column Syntax OID

hh3cDot11APServiceVlanSerialID

This object represents AP serial id.

OctetString

.1.3.6.1.4.1.25506.2.75.4.3.7.1.1

hh3cDot11APServiceVlanSPID

This object represents the ID of each service policy used by the AP.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.7.1.2

hh3cDot11APServiceVlanId

This object represents the VLAN ID of BSS which is generated when the
service policy is bound to the radio.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.25506.2.75.4.3.7.1.3

hh3cDot11APServiceVlanRowStatus

This object represents the status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.3.7.1.4

hh3cDot11RadioConfigTable

table

.1.3.6.1.4.1.25506.2.75.4.3.8 · 1 row entry · 21 columns

Open in standard view

Before AP connects to AC, administrator will configure radio
parameter to each radio.

hh3cDot11RadioConfigEntry entry .1.3.6.1.4.1.25506.2.75.4.3.8.1

Each entry contains configuration information for each radio.

Indexes

hh3cDot11RCAPSerialID hh3cDot11RCRadioID

Column Syntax OID

hh3cDot11RCAPSerialID

This object represents the Serial ID of AP.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.3.8.1.1

hh3cDot11RCRadioID

This object represents each radio.

HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.8.1.2

hh3cDot11RCRadioType

This object represents the radio will work with which 802.11 radio
type.

HH3C-DOT11-REF-MIBHh3cDot11RadioTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11n
16	dot11gn
32	dot11an
64	dot11ac
128	dot11gac
256	dot11ax
512	dot11gax

.1.3.6.1.4.1.25506.2.75.4.3.8.1.3

hh3cDot11RCChannel

This object represents the channel allocation of radio.

HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.8.1.4

hh3cDot11RCPreambleLen

This object represents whether use long or short preamble for 802.11
MAC frame.
When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn,
then value for hh3cDot11PreambleLen will be valid.
Otherwise, the value for…

HH3C-DOT11-REF-MIBHh3cDot11PreambleTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11PreambleType Enumeration

Type Values:

1	long
2	short

.1.3.6.1.4.1.25506.2.75.4.3.8.1.5

hh3cDot11RCPwrAttValue

This object represents the value of power attenuation.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.8.1.6

hh3cDot11RCApPowerLevel

Represents the maximal transmit power scope for AP.

dbmHH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.8.1.7

hh3cDot11RCDynamicChlState

Enable/Disable dynamic channel selection.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.8.1.8

hh3cDot11RCDynamicPowerState

Enable/Disable dynamic power selection for the band.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.8.1.9

hh3cDot11RCRadioStatus

Represents the radio admin status whether is enabled
or disabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.8.1.10

hh3cDot11RCRadioRate

Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X. The data transmit rates
between AP and STA must fall into the configured rates.
(Note: For 802.11n radios,…

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.75.4.3.8.1.11

hh3cDot11RCPwrAdjustStepLength

Power adjustment step-length in dBm.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.8.1.12

hh3cDot11RCRadioType2

This object represents the radio will work with which 802.11 radio
type.

HH3C-DOT11-REF-MIBHh3cDot11RadioType2r/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType2 Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11an
16	dot11gn
32	dot11ac
64	dot11gac
128	dot11ax
256	dot11gax

.1.3.6.1.4.1.25506.2.75.4.3.8.1.13

hh3cDot11RCPreambleLenCM

Enumerationr/w

Enumerated Values:

0	long
1	short

.1.3.6.1.4.1.25506.2.75.4.3.8.1.14

hh3cDot11RCDynamicChlStateCM

Enable/Disable dynamic channel selection.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.25506.2.75.4.3.8.1.15

hh3cDot11RCRadioStatusCM

Represents the radio admin status whether is enabled
or disabled.

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.25506.2.75.4.3.8.1.16

hh3cDot11RCRadioRateCM

Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format of each value can be MCS X. The data transmit
rates between AP and client should be one of the configured rates.
(Note: …

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.75.4.3.8.1.17

hh3cDot11RCDynamicPowerStateCM

Enable/disable dynamic power selection for the band.

HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TruthValueCM Enumeration

Type Values:

0	dot11false
1	dot11true

.1.3.6.1.4.1.25506.2.75.4.3.8.1.18

hh3cDot11RCRssiThresholdCM

Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate.

dBmSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.8.1.19

hh3cDot11RCDynamicChlStateSelfDecisiveCM

Enable/disable dynamic channel selection self decisive for the band.

HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TruthValueCM Enumeration

Type Values:

0	dot11false
1	dot11true

.1.3.6.1.4.1.25506.2.75.4.3.8.1.20

hh3cDot11RCDynamicPowerStateSelfDecisiveCM

Enable/disable dynamic power selection self decisive for the band.

HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TruthValueCM Enumeration

Type Values:

0	dot11false
1	dot11true

.1.3.6.1.4.1.25506.2.75.4.3.8.1.21

hh3cDot11RadioSSIDCfgTable

table

.1.3.6.1.4.1.25506.2.75.4.3.9 · 1 row entry · 6 columns

Open in standard view

For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.

hh3cDot11RadioSSIDCfgEntry entry .1.3.6.1.4.1.25506.2.75.4.3.9.1

Each entry contains SSID configuration information for each radio.

Indexes

hh3cDot11RadioSSIDSerialID hh3cDot11RadioSSIDRadioID hh3cDot11RadioSSIDWLANID

Column Syntax OID

hh3cDot11RadioSSIDSerialID

This object represents the serial ID of AP.

HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.25506.2.75.4.3.9.1.1

hh3cDot11RadioSSIDRadioID

This object represents each radio.

HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.9.1.2

hh3cDot11RadioSSIDWLANID

This object represents the WLAN ID of the BSSID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.9.1.3

hh3cDot11RadioSSIDIndex

This object represents the ID of each service policy used by the
radio.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.3.9.1.4

hh3cDot11RadioBSSID

As MAC address format, it is used to identify BSS.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.25506.2.75.4.3.9.1.5

hh3cDot11RadioSSIDRowStatus

RowStatus.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.3.9.1.6

hh3cDot11APSerialIDTable

table

.1.3.6.1.4.1.25506.2.75.4.3.10 · 1 row entry · 20 columns

Open in standard view

The table will provide the general information about APs.

hh3cDot11APSerialIDEntry entry .1.3.6.1.4.1.25506.2.75.4.3.10.1

Each entry contains the general information of an AP.

Indexes

hh3cDot11SIDAPSerialID

Column Syntax OID

hh3cDot11SIDAPSerialID

Represents AP serial id.

OctetString

.1.3.6.1.4.1.25506.2.75.4.3.10.1.1

hh3cDot11SIDAPWorkMode

Enumerationr/w

Enumerated Values:

1	normal
2	monitor
3	hybrid

.1.3.6.1.4.1.25506.2.75.4.3.10.1.2

hh3cDot11SIDAPGetIPMethod

This object represents the method how AP gets IP address.

Enumerationr/w

Enumerated Values:

1	dhcpAlloc
2	static

.1.3.6.1.4.1.25506.2.75.4.3.10.1.3

hh3cDot11SIDAPTemplateName

Represents the name of AP template.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.10.1.4

hh3cDot11SIDModelAlias

Represents the alias of AP model name.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.10.1.5

hh3cDot11SIDAPDescription

This attribute will give more information about AP.
Administrator could suggest the location, owner or
other information for each AP.
If the value is set to NULL, the description will be removed.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.10.1.6

hh3cDot11SIDRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.3.10.1.7

hh3cDot11SIDAPName

Represents the AP name.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.3.10.1.8

hh3cDot11SIDStatisInterv

Represents the interval of radio statistic.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.9

hh3cDot11SIDAPBroadcastProbeReply

Represents enable the AP to reply broadcast probe or not.
'true' : The AP to reply broadcast probe is enabled.
'false': The AP to reply broadcast probe is disabled

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.10.1.10

hh3cDot11SIDAPStaIdleTimerInterv

Represents the interval for which the link between AP and STA
( power-save or awake ) can be idle.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.11

hh3cDot11SIDStaKeepAliveTimerInterv

Represents the interval of the keep alive requests sent between
AP and STA.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.12

hh3cDot11SIDAPCir

Represents the committed information rate between AP and AC.

KbpsSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.13

hh3cDot11SIDAPCbs

Represents the committed burst size between AP and AC.

BytesSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.14

hh3cDot11SIDAPPriorityLevel

This object represents the connection priority for the AP.
If the connection priority is 7, the AC is considered as the
primary AC for the AP.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.25506.2.75.4.3.10.1.15

hh3cDot11SIDAPElementID

This object represents the AP element ID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.16

hh3cDot11SIDAPDevDetectEnable

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.3.10.1.17

hh3cDot11SIDAPStatisIntervMode

This object represents the mode of statics interval.
normal - statics interval value between 10s to 240s
realtime - statics interval value between 0s to 5s

Enumerationr/w

Enumerated Values:

1	normal
2	realtime

.1.3.6.1.4.1.25506.2.75.4.3.10.1.18

hh3cDot11SIDAPWorkModeCM

Represents what work mode for AP.
The following values are supported:
normal - AP will supply WLAN service.
monitor - AP will be a monitor to find attack.
SemiMonitor - AP will supply WLAN service and Device detect…

Enumerationr/w

Enumerated Values:

0	normal
1	monitor
2	semimonitor

.1.3.6.1.4.1.25506.2.75.4.3.10.1.19

hh3cDot11SIDEchoInterval

Represents the interval for send echo requests.

secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.3.10.1.20

hh3cDot11APSTVlanTable

table

.1.3.6.1.4.1.25506.2.75.4.3.11 · 1 row entry · 4 columns

Open in standard view

For each service policy, it could be bind to several VLANs.
The table describes the relationship between VLAN and
service policies.

hh3cDot11APSTVlanEntry entry .1.3.6.1.4.1.25506.2.75.4.3.11.1

Each entry contains VLAN and service policy information for each
specific radio of AP.

Indexes

hh3cDot11SIDAPSerialID hh3cDot11CfgRadioID hh3cDot11CfgServicePolicyID

Column Syntax OID

hh3cDot11CfgSTVLANID

Represents the VLAN that current Service Policy have bind to.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.25506.2.75.4.3.11.1.1

hh3cDot11CfgSTNASPortID

Represents the NAS Port ID of current Service Policy for each
specific radio of AP.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.3.11.1.2

hh3cDot11CfgServiceSetRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.3.11.1.3

hh3cDot11CfgSTNASID

Represents the NAS ID of current Service Policy for each
specific radio of AP.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.3.11.1.4

hh3cDot11RadioIntfConfigTable

table

.1.3.6.1.4.1.25506.2.75.4.4.1 · 1 row entry · 16 columns

Open in standard view

The table defines the parameters for radio in AP, as per
radio.

hh3cDot11RadioIntfConfigEntry entry .1.3.6.1.4.1.25506.2.75.4.4.1.1

Each entry contains information of each radio in AP.

Indexes

hh3cDot11RadioIfIdx

Column Syntax OID

hh3cDot11RadioIfIdx

Represents the Radio IfIndex of radio in AP.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.1

hh3cDot11RadioCfgBeaconIntvl

Represents the interval for Beacon management frame.

TUSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.2

hh3cDot11RadioCfgDtimIntvl

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.3

hh3cDot11RadioCfgRtsThreshold

Represents the current minimum size,in octets,of the MAC
protocol data unit (MPDU), below which a Request to send/Clear
to send (RTS/CTS) handshake shall not be performed.

ByteSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.4

hh3cDot11RadioCfgFragThreshold

ByteSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.5

hh3cDot11RadioCfgShtRetryThld

Represents the maximum number of transmission attempts of a
frame, the length of which is less than or equal to
hh3cDot11RadioRTSThreshold, that shall be made before a failure
condition is indicated.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.6

hh3cDot11RadioCfglongRtrThld

Represents the maximum number of transmission attempts of a
frame, the length of which is longer than
hh3cDot11RadioRTSThreshold, that shall be made before a
failure condition is indicated.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.7

hh3cDot11RadioCfgMaxRxLifetime

Represents the elapsed time. After the time specified by
hh3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble
the MSDU shall be terminated.

millisecondSNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.75.4.4.1.1.8

hh3cDot11RadioCfgType

Represents the radio will work with which 802.11 radio type.

HH3C-DOT11-REF-MIBHh3cDot11RadioTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11n
16	dot11gn
32	dot11an
64	dot11ac
128	dot11gac
256	dot11ax
512	dot11gax

.1.3.6.1.4.1.25506.2.75.4.4.1.1.9

hh3cDot11RadioCfgChannel

Represents the channel allocation of radio.

HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.4.1.1.10

hh3cDot11RadioCfgMaxTxPwrLvl

Represents the maximal transmit power scope for AP.

dbmHH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.4.1.1.11

hh3cDot11RadioCfgPreambleLen

Represents whether use long or short preamble for 802.11 MAC
frame.

HH3C-DOT11-REF-MIBHh3cDot11PreambleTyper/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11PreambleType Enumeration

Type Values:

1	long
2	short

.1.3.6.1.4.1.25506.2.75.4.4.1.1.12

hh3cDot11RadioCfgWorkMode

Represents work mode of the radio.

HH3C-DOT11-REF-MIBHh3cDot11WorkModer/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11WorkMode Enumeration

Type Values:

1	normal
2	monitor
3	hybrid

.1.3.6.1.4.1.25506.2.75.4.4.1.1.13

hh3cDot11RadioCfgOnly11gEnable

Represents whether enable only 802.11g radio mode or not.
'true' : Only 802.11g radio mode is enabled.
'false': Only 802.11g radio mode is disabled.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.4.1.1.14

hh3cDot11RadioCfgType2

Represents the radio will work with which 802.11 radio type.

HH3C-DOT11-REF-MIBHh3cDot11RadioType2r/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType2 Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11an
16	dot11gn
32	dot11ac
64	dot11gac
128	dot11ax
256	dot11gax

.1.3.6.1.4.1.25506.2.75.4.4.1.1.15

hh3cDot11RadioCfgRssithresholdCM

Represents the minimum value of the RSSI.
The clients with RSSI below this value will be refused to associate.

dBmSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.4.1.1.16

hh3cDot11RadioIntfBindTable

table

.1.3.6.1.4.1.25506.2.75.4.4.2 · 1 row entry · 3 columns

Open in standard view

The table defines the binding information for each radio in AP.

hh3cDot11RadioIntfBindEntry entry .1.3.6.1.4.1.25506.2.75.4.4.2.1

Each entry contains the radio interface binding information
in AP.

Indexes

hh3cDot11RadioIfIdx hh3cDot11RadioIntfBindSvcPlcyID

Column Syntax OID

hh3cDot11RadioIntfBindSvcPlcyID

Represents the ID of each service policy.

HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ServicePolicyIDType Integer32

.1.3.6.1.4.1.25506.2.75.4.4.2.1.1

hh3cDot11RadioIntfBindIfIdx

Represents the Ifindex of interface which is binded to
the radio.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.25506.2.75.4.4.2.1.2

hh3cDot11RadioIntfBindRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.4.2.1.3

hh3cDot11DataRateConfigTable

table

.1.3.6.1.4.1.25506.2.75.4.5.1 · 1 row entry · 5 columns

Open in standard view

Table will provide data rate configuration for a specific radio type.

hh3cDot11DataRateConfigEntry entry .1.3.6.1.4.1.25506.2.75.4.5.1.1

Each entry of the table will provide data rate configuration for a
specific radio type.

Indexes

hh3cDot11RadioTypeID

Column Syntax OID

hh3cDot11RadioTypeID

Represents the radio type.

HH3C-DOT11-REF-MIBHh3cDot11RadioType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType Enumeration

Type Values:

1	dot11a
2	dot11b
4	dot11g
8	dot11n
16	dot11gn
32	dot11an
64	dot11ac
128	dot11gac
256	dot11ax
512	dot11gax

.1.3.6.1.4.1.25506.2.75.4.5.1.1.1

hh3cDot11SupportedRateSet

Represents the supported rate set of a particular radio type.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.75.4.5.1.1.2

hh3cDot11MandatoryRateSet

Represents the mandatory rate set of a particular radio type.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.75.4.5.1.1.3

hh3cDot11DisabledRateSet

Represents the disabled rate set of a particular radio type.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.75.4.5.1.1.4

hh3cDot11SmartRateSet

Represents the rate set of a particular radio type.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.25506.2.75.4.5.1.1.5

hh3cDot11WlanEssIfTable

table

.1.3.6.1.4.1.25506.2.75.4.6.1 · 1 row entry · 3 columns

Open in standard view

This table is used to configure WLAN ESS interface.

hh3cDot11WlanEssIfEntry entry .1.3.6.1.4.1.25506.2.75.4.6.1.1

Each entry contains the WLAN ESS interface configuration.

Indexes

hh3cDot11WlanEssIfNumber

Column Syntax OID

hh3cDot11WlanEssIfNumber

This node represents the WLAN ESS interface number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.1.1.1

hh3cDot11WlanEssIfIndex

This node represents the ifIndex of WLAN-ESS interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.1.1.2

hh3cDot11WlanEssRowStatus

This node represents the WLAN ESS interface row status.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.6.1.1.3

hh3cDot11WlanBssIfTable

table

.1.3.6.1.4.1.25506.2.75.4.6.2 · 1 row entry · 3 columns

Open in standard view

This table is used to configure WLAN BSS interface.

hh3cDot11WlanBssIfEntry entry .1.3.6.1.4.1.25506.2.75.4.6.2.1

Each entry contains the WLAN BSS interface configuration.

Indexes

hh3cDot11WlanBssIfNumber

Column Syntax OID

hh3cDot11WlanBssIfNumber

This node represents the WLAN BSS interface number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.2.1.1

hh3cDot11WlanBssIfIndex

This node represents the ifIndex of WLAN-BSS interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.2.1.2

hh3cDot11WlanBssRowStatus

This node represents the WLAN BSS interface row status.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.6.2.1.3

hh3cDot11WLANEthernetIfTable

table

.1.3.6.1.4.1.25506.2.75.4.6.3 · 1 row entry · 3 columns

Open in standard view

This table is used to configure WLAN Ethernet interface.

hh3cDot11WLANEthernetIfEntry entry .1.3.6.1.4.1.25506.2.75.4.6.3.1

Each entry contains the WLAN Ethernet interface configuration.

Indexes

hh3cDot11WlanEthernetIfNumber

Column Syntax OID

hh3cDot11WlanEthernetIfNumber

This node represents the WLAN Ethernet interface number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.3.1.1

hh3cDot11WLANEthernetIfIndex

This node represents the ifIndex of WLAN-Ethernet interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.3.1.2

hh3cDot11WlanEthernetRowStatus

This node represents the Wlan Ethernet interface row status.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.6.3.1.3

hh3cDot11PortSecurityTable

table

.1.3.6.1.4.1.25506.2.75.4.6.4 · 1 row entry · 4 columns

Open in standard view

This table defines the WLAN security status for ESS, BSS, mesh and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
hh3cPortSecurityTables should be used to configure port security.

hh3cDot11PortSecurityEntry entry .1.3.6.1.4.1.25506.2.75.4.6.4.1

There is a row in this table for each ESS, BSS and WLAN-Ethernet
interface.It is indexed using the object ifIndex in RFC1213-MIB.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

hh3cDot11PortSecurityMode

Determines the security modes of the WLAN port.

noRestrictions - The default value,no any security mode is set.

userLoginSecureExt - Access to the port is denied until the port
client is …

Enumerationr/w

Enumerated Values:

1	noRestrictions
2	userLoginSecureExt
3	psk
4	macAddressAndPsk
5	userLoginSecureExtOrPsk
6	ext

.1.3.6.1.4.1.25506.2.75.4.6.4.1.1

hh3cDot11SecurityUserLoginTxKeyType

This indicates the key type in the 802.1X EAPOL_Key packet.

userLoginTxKeyTypeNone - This means the key type is not set yet.

userLoginTxKeyTypeDot11Key - This selects the 802.11 key type.…

Enumerationr/w

Enumerated Values:

1	userLoginTxKeyTypeNone
2	userLoginTxKeyTypeDot11Key
3	userLoginTxKeyTypeRsaRC4Key

.1.3.6.1.4.1.25506.2.75.4.6.4.1.2

hh3cDot11SecurityPskKeyMode

This is the password input mode. When input as pskKeyModePassPhrase,
hh3cDot11SecurePskKeyString must be 8 to 63 characters; when input as
pskKeyModeRawKey, hh3cDot11SecurePskKeyString must be 64 characters and
each ch…

Enumerationr/w

Enumerated Values:

1	pskKeyModeNone
2	pskKeyModePassPhrase
3	pskKeyModeRawKey

.1.3.6.1.4.1.25506.2.75.4.6.4.1.3

hh3cDot11SecurityPskKeyString

This is the password string used for psk authentication.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.4.6.4.1.4

hh3cDot11WlanMeshIfTable

table

.1.3.6.1.4.1.25506.2.75.4.6.5 · 1 row entry · 3 columns

Open in standard view

This table is used to configure WLAN mesh interface.

hh3cDot11WlanMeshIfEntry entry .1.3.6.1.4.1.25506.2.75.4.6.5.1

Each entry contains the WLAN mesh interface configuration.

Indexes

hh3cDot11WlanMeshIfNumber

Column Syntax OID

hh3cDot11WlanMeshIfNumber

This node represents the WLAN mesh interface number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.5.1.1

hh3cDot11WlanMeshIfIndex

This node represents the index of WLAN mesh interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.6.5.1.2

hh3cDot11WlanMeshRowStatus

This node represents the WLAN mesh interface row status.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.6.5.1.3

hh3cDot11nRadioCfgTable

table

.1.3.6.1.4.1.25506.2.75.4.8.1 · 1 row entry · 9 columns

Open in standard view

This table is used to configure dot11n on the radio.

hh3cDot11nRadioCfgEntry entry .1.3.6.1.4.1.25506.2.75.4.8.1.1

This entry contains the dot11n configuration on the radio.

Indexes

hh3cDot11nRadioCfgIndex

Column Syntax OID

hh3cDot11nRadioCfgIndex

Represents index of the radio.

HH3C-DOT11-REF-MIBHh3cDot11RadioElementIndex

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioElementIndex Unsigned32

.1.3.6.1.4.1.25506.2.75.4.8.1.1.1

hh3cDot11nAMpduEnable

Enable the function of A-MPDU.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.1.1.2

hh3cDot11nAMsduEnable

Enable the function of A-MSDU.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.1.1.3

hh3cDot11nClientDot11nOnly

If radio type is 802.11an or 802.11gn, only permit clients of 11n mode.
If radio type is 802.11ac, permit clients of 11n and 11ac mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.1.1.4

hh3cDot11nChanelBand

Specify the bandwidth mode.

Enumerationr/w

Enumerated Values:

1	mode20
2	mode40
3	mode80
4	mode160
5	mode80and80

.1.3.6.1.4.1.25506.2.75.4.8.1.1.5

hh3cDot11nShortGiEnable

The function of Short GI.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.1.1.6

hh3cDot11nClientDot11acOnly

Only permit clients of 11ac mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.1.1.7

hh3cDot11nSupportMaxMcs

Specify the maximum Modulation and Coding Scheme (MCS) index for
802.11n supported rates.
The specified maximum MCS index for 802.11n supported rates must be no
less than the specified maximum MCS index for 802.11n mand…

Integer32r/w

Constraints:
range: 0-76

.1.3.6.1.4.1.25506.2.75.4.8.1.1.8

hh3cDot11nMandatoryMaxMcs

Specify the maximum modulation and coding scheme (MCS) index for
802.11n mandatory rates.
The value 255 indicates that no maximum MCS index
is specified. No maximum MCS index is specified for 802.11n
mandatory rates by…

Integer32r/w

Constraints:
range: 255-255
range: 0-76

.1.3.6.1.4.1.25506.2.75.4.8.1.1.9

hh3cDot11RadioWDSTable

table

.1.3.6.1.4.1.25506.2.75.4.8.2 · 1 row entry · 5 columns

Open in standard view

This table is used to configure WDS on the radio.

hh3cDot11RadioWDSEntry entry .1.3.6.1.4.1.25506.2.75.4.8.2.1

Each entry contains the WDS configuration on the radio.

Indexes

hh3cDot11RadioWDSIndex

Column Syntax OID

hh3cDot11RadioWDSIndex

Represents the element index of radio.

HH3C-DOT11-REF-MIBHh3cDot11RadioElementIndex

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioElementIndex Unsigned32

.1.3.6.1.4.1.25506.2.75.4.8.2.1.1

hh3cDot11RadioWDSMode

Represents enable the WDS mode or not.
nowds: The WDS mode is disabled.
wds : The WDS mode is enabled

Enumerationr/w

Enumerated Values:

1	nowds
2	wds

.1.3.6.1.4.1.25506.2.75.4.8.2.1.2

hh3cDot11RadioWDSNetWorkID

Represents the mesh ID of WDS.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.25506.2.75.4.8.2.1.3

hh3cDot11WDSSecPskKeyMode

Represents the PSK mode of WDS.

Enumerationr/w

Enumerated Values:

1	pskKeyModeNone
2	pskKeyModePassPhrase
3	pskKeyModeRawKey

.1.3.6.1.4.1.25506.2.75.4.8.2.1.4

hh3cDot11WDSSecPskKeyString

Represents the PSK value of WDS.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.25506.2.75.4.8.2.1.5

hh3cDot11nRadioCfg2Table

table

.1.3.6.1.4.1.25506.2.75.4.8.3 · 1 row entry · 14 columns

Open in standard view

This table is used to configure dot11n on the radio.

hh3cDot11nRadioCfg2Entry entry .1.3.6.1.4.1.25506.2.75.4.8.3.1

This entry contains the dot11n configuration on the radio.

Indexes

hh3cDot11nRadioCfg2APIDIndex hh3cDot11nRadioCfg2RadioIDIndex

Column Syntax OID

hh3cDot11nRadioCfg2APIDIndex

Represents index of the AP.

HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.25506.2.75.4.8.3.1.1

hh3cDot11nRadioCfg2RadioIDIndex

Represents index of the radio.

HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Integer32

.1.3.6.1.4.1.25506.2.75.4.8.3.1.2

hh3cDot11nRadioCfg2AMpduEnable

Enable the function of A-MPDU.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.3.1.3

hh3cDot11nRadioCfg2AMsduEnable

Enable the function of A-MSDU.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.3.1.4

hh3cDot11nRadioCfg2ClientDot11nOnly

If radio type is 802.11an or 802.11gn, only permit clients of 11n mode.
If radio type is 802.11ac, permit clients of 11n and 11ac mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.3.1.5

hh3cDot11nRadioCfg2ChannelBand

Specify the bandwidth mode.

Enumerationr/w

Enumerated Values:

1	mode20
2	mode40
3	mode80
4	mode160
5	mode80and80

.1.3.6.1.4.1.25506.2.75.4.8.3.1.6

hh3cDot11nRadioCfg2ShortGiEnable

Enable the function of Short GI.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.3.1.7

hh3cDot11nRadioCfg2AMpduEnableCM

Enable the function of A-MPDU.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.25506.2.75.4.8.3.1.8

hh3cDot11nRadioCfg2ChannelBandCM

Specify the bandwidth mode.

Enumerationr/w

Enumerated Values:

1	mode40
2	mode20
3	mode80
4	mode160
5	mode80and80

.1.3.6.1.4.1.25506.2.75.4.8.3.1.9

hh3cDot11nRadioCfg2ShortGiEnableCM

Enable the function of Short GI.

Enumerationr/w

Enumerated Values:

0	off
1	on

.1.3.6.1.4.1.25506.2.75.4.8.3.1.10

hh3cDot11nRadioCfg2ClientDot11acOnly

Only permit clients of 11ac mode.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.8.3.1.11

hh3cDot11nRadioCfg2ClientDot11nOnlyCM

If radio type is 802.11an or 802.11gn, permit only clients of 11n mode.
If radio type is 802.11ac, permit clients of both 11n and 11ac mode.

HH3C-DOT11-REF-MIBHh3cDot11TruthValueCMr/w

Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11TruthValueCM Enumeration

Type Values:

0	dot11false
1	dot11true

.1.3.6.1.4.1.25506.2.75.4.8.3.1.12

hh3cDot11nRadioCfg2SupportMaxMcs

Integer32r/w

Constraints:
range: 0-76

.1.3.6.1.4.1.25506.2.75.4.8.3.1.13

hh3cDot11nRadioCfg2MandatoryMaxMcs

Integer32r/w

Constraints:
range: 0-76
range: 255-255

.1.3.6.1.4.1.25506.2.75.4.8.3.1.14

hh3cDot11LocalACTemplateTable

table

.1.3.6.1.4.1.25506.2.75.4.10.1 · 1 row entry · 12 columns

Open in standard view

By local AC template CLI, administrator will configure the parameters of LocalAC
by convenience.
Before local AC boot up and connect to AC by CAPWAP tunnel, administrator
will create local AC template for each local AC. When local AC connect to AC,
AC will assign configuration to local AC by hh3cDot11LocalACSerialID
information in local AC template.

hh3cDot11LocalACTemplateEntry entry .1.3.6.1.4.1.25506.2.75.4.10.1.1

Each entry contains configuration information for each LocalAC.

Indexes

hh3cDot11LocalACTemplateName

Column Syntax OID

hh3cDot11LocalACTemplateName

Represents the name of LocalAC template.

OctetString

Constraints:
range: 0-127

.1.3.6.1.4.1.25506.2.75.4.10.1.1.1

hh3cDot11LocalACName

Represents the LocalAC name.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.10.1.1.2

hh3cDot11LocalACSerialID

Represents LocalAC serial id.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.10.1.1.3

hh3cDot11TemLocalACModelAlias

Represents the alias of LocalAC model name.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.10.1.1.4

hh3cDot11LocalACTempRowStatus

The status of this table entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.25506.2.75.4.10.1.1.5

hh3cDot11LocalACStatus

Represents the capwap status of local AC.
The following values are supported:
join - local AC is joining to cnetral AC.
joinConfirm - cnetral AC confirm whether permit local AC to
- join.
download - local A…

Enumeration

Enumerated Values:

1	join
2	joinConfirm
3	download
4	config
5	run
6	idle

.1.3.6.1.4.1.25506.2.75.4.10.1.1.6

hh3cDot11LocalACIPAddress

Represents the IP address of an LocalAC.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.25506.2.75.4.10.1.1.7

hh3cDot11LocalACIPv6Address

Represents the IPv6 address of LocalAC.

OctetString

.1.3.6.1.4.1.25506.2.75.4.10.1.1.8

hh3cDot11EchoInterval

Represents the interval of echo.

secondInteger32r/w

Constraints:
range: 5-255
range: 0-0

.1.3.6.1.4.1.25506.2.75.4.10.1.1.9

hh3cDot11RetransInterval

Represents the interval of retransmit.

secondInteger32r/w

Constraints:
range: 3-8

.1.3.6.1.4.1.25506.2.75.4.10.1.1.10

hh3cDot11RetransCount

Represents the maximum of retransmit.

secondInteger32r/w

Constraints:
range: 2-5

.1.3.6.1.4.1.25506.2.75.4.10.1.1.11

hh3cDot11FirmwareUpgrade

Represents the status of firmware upgrade for an local AC.
The following values are supported:
enable - local AC firmware upgrade will be enabled.
disable - local AC firmware upgrade will be disabled.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.25506.2.75.4.10.1.1.12

hh3cDot11RemoteCfgApTable

table

.1.3.6.1.4.1.25506.2.75.4.11.1 · 1 row entry · 3 columns

Open in standard view

Remote configuration for an AP.

hh3cDot11RemoteCfgApEntry entry .1.3.6.1.4.1.25506.2.75.4.11.1.1

Each entry contains configuration information for each AP.

Indexes

hh3cDot11RmtApName

Column Syntax OID

hh3cDot11RmtApName

Represents the name of an AP.

OctetString

Constraints:
range: 1-127

.1.3.6.1.4.1.25506.2.75.4.11.1.1.1

hh3cDot11RmtVlanList

Represents the VLAN list on an AP.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.11.1.1.2

hh3cDot11RmtCfgEnable

Enables remote configuration synchronization.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.11.1.1.3

hh3cDot11RemoteCfgIFTable

table

.1.3.6.1.4.1.25506.2.75.4.11.2 · 1 row entry · 14 columns

Open in standard view

Remote configuration for interface on an AP.

hh3cDot11RemoteCfgIFEntry entry .1.3.6.1.4.1.25506.2.75.4.11.2.1

Each entry contains configuration information for each interface on an AP.

Indexes

hh3cDot11RmtIfApName hh3cDot11RmtIfType hh3cDot11RmtIfNum

Column Syntax OID

hh3cDot11RmtIfApName

Represents the name of an AP.

OctetString

Constraints:
range: 1-127

.1.3.6.1.4.1.25506.2.75.4.11.2.1.1

hh3cDot11RmtIfType

Represents the type of the interface.
ethernet (1),
gigabitethernet (2),
ten-gigabitethernet (3),
smartrate-ethernet(4).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.11.2.1.2

hh3cDot11RmtIfNum

Represents the ID of the interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.11.2.1.3

hh3cDot11RmtIfName

Represents the name of the interface.

OctetString

.1.3.6.1.4.1.25506.2.75.4.11.2.1.4

hh3cDot11RmtIfLinkType

Set the link type to access, hybrid or trunk.
Setting recommend one and setup more related nodes.

Enumerationr/w

Enumerated Values:

1	access
2	trunk
3	hybrid

.1.3.6.1.4.1.25506.2.75.4.11.2.1.5

hh3cDot11RmtIfAccessVlan

Specify the access VLAN for a port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.11.2.1.6

hh3cDot11RmtIfTrunkPvidVlan

Specify the default VLAN for a port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.11.2.1.7

hh3cDot11RmtIfTrunkVlanlist

Specify the permitted VLAN list for a port.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.11.2.1.8

hh3cDot11RmtIfHybridPvidVlan

Specify the default VLAN for the hybrid port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.11.2.1.9

hh3cDot11RmtIfHybVlanListTag

Assign the hybrid port to tagged VLANs.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.11.2.1.10

hh3cDot11RmtIfHybVlanListUnTag

Assign the hybrid port to untagged VLANs.

OctetStringr/w

.1.3.6.1.4.1.25506.2.75.4.11.2.1.11

hh3cDot11RmtIfIsolate

Enable or disable port isolation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.11.2.1.12

hh3cDot11RmtIfLinkAggGroupId

Specify link aggregation group number for the port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.25506.2.75.4.11.2.1.13

hh3cDot11RmtIfManagement

Interface management of the port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.25506.2.75.4.11.2.1.14