hh3cDot11RCRadioRateCM

HH3C-DOT11-CFG-MIB · .1.3.6.1.4.1.25506.2.75.4.3.8.1.17
MIB view Table view

Object

column r/w OctetString 
Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format of each value can be MCS X.  The data transmit
rates between AP and client should be one of the configured rates.
(Note: For 802.11n radios, the first value is mandatory rate, and the second
value is supported rate.  If more than two rate values are configured, the
configuration will not take effect.  If only one rate value is configured,
the mandatory rate will be set to the default value.)

Context

MIB
HH3C-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.25506.2.75.4.3.8.1.17
Type
column
Access
readwrite
Status
current
Parent
hh3cDot11RadioConfigEntry
Table
hh3cDot11RadioConfigTable
Siblings
20

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cDot11RCAPSerialID
This object represents the Serial ID of AP.
columnOctetString.1.3.6.1.4.1.25506.2.75.4.3.8.1.1
hh3cDot11RCRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.8.1.10
hh3cDot11RCRadioRate
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the conf…
columnOctetString.1.3.6.1.4.1.25506.2.75.4.3.8.1.11
hh3cDot11RCPwrAdjustStepLength
Power adjustment step-length in dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.8.1.12
hh3cDot11RCRadioType2
This object represents the radio will work with which 802.11 radio type.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioType2.1.3.6.1.4.1.25506.2.75.4.3.8.1.13
hh3cDot11RCPreambleLenCM
This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen…
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.8.1.14
hh3cDot11RCDynamicChlStateCM
Enable/Disable dynamic channel selection.
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.8.1.15
hh3cDot11RCRadioStatusCM
Represents the radio admin status whether is enabled or disabled.
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.8.1.16
hh3cDot11RCDynamicPowerStateCM
Enable/disable dynamic power selection for the band.
columnHH3C-DOT11-REF-MIBHh3cDot11TruthValueCM.1.3.6.1.4.1.25506.2.75.4.3.8.1.18
hh3cDot11RCRssiThresholdCM
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
columndBm SNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.8.1.19
hh3cDot11RCRadioID
This object represents each radio.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioScopeType.1.3.6.1.4.1.25506.2.75.4.3.8.1.2
hh3cDot11RCDynamicChlStateSelfDecisiveCM
Enable/disable dynamic channel selection self decisive for the band.
columnHH3C-DOT11-REF-MIBHh3cDot11TruthValueCM.1.3.6.1.4.1.25506.2.75.4.3.8.1.20
hh3cDot11RCDynamicPowerStateSelfDecisiveCM
Enable/disable dynamic power selection self decisive for the band.
columnHH3C-DOT11-REF-MIBHh3cDot11TruthValueCM.1.3.6.1.4.1.25506.2.75.4.3.8.1.21
hh3cDot11RCRadioType
This object represents the radio will work with which 802.11 radio type.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioType.1.3.6.1.4.1.25506.2.75.4.3.8.1.3
hh3cDot11RCChannel
This object represents the channel allocation of radio.
columnHH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType.1.3.6.1.4.1.25506.2.75.4.3.8.1.4
hh3cDot11RCPreambleLen
This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen…
columnHH3C-DOT11-REF-MIBHh3cDot11PreambleType.1.3.6.1.4.1.25506.2.75.4.3.8.1.5
hh3cDot11RCPwrAttValue
This object represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.8.1.6
hh3cDot11RCApPowerLevel
Represents the maximal transmit power scope for AP.
columndbm HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType.1.3.6.1.4.1.25506.2.75.4.3.8.1.7
hh3cDot11RCDynamicChlState
Enable/Disable dynamic channel selection.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.8.1.8
hh3cDot11RCDynamicPowerState
Enable/Disable dynamic power selection for the band.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.8.1.9