hh3cDot11CfgSPOutCirMode

HH3C-DOT11-CFG-MIB · .1.3.6.1.4.1.25506.2.75.4.3.2.1.31
MIB view Table view

Object

column r/w HH3C-DOT11-REF-MIBHh3cDot11CirMode 
Represents the committed information rate(CIR) mode for the outbound direction.
This object is useful only when the corresponding CIR has a nonzero value.
If the value of this object is changed, the corresponding CIR will be reset.

Context

MIB
HH3C-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.25506.2.75.4.3.2.1.31
Type
column
Access
readwrite
Status
current
Parent
hh3cDot11RadioToConfigEntry
Table
hh3cDot11RadioToConfigTable
Siblings
31

Syntax

HH3C-DOT11-REF-MIBHh3cDot11CirMode
Source
HH3C-DOT11-REF-MIBHh3cDot11CirMode
Base type
Enumeration

Values & Constraints

Type Values
1static
2dynamic

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cDot11APTemplateNameCfg
Represents the name of AP template.
columnOctetString.1.3.6.1.4.1.25506.2.75.4.3.2.1.1
hh3cDot11CfgWorkMode
Represents work mode of the radio.
columnHH3C-DOT11-REF-MIBHh3cDot11WorkMode.1.3.6.1.4.1.25506.2.75.4.3.2.1.10
hh3cDot11CfgPwrAttValue
Represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.2.1.11
hh3cDot11RadioTxArithmetic
Represents the transmission arithmetic of the radio. The following values are supported: quality - Consider the quality first during the transmission. bandwidth - Consider the b…
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.2.1.12
hh3cDot11CfgChannelLockStat
Represents locked status of channel on the radio.
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.2.1.13
hh3cDot11CfgPowerLockStat
Represents locked status of power on the radio.
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.2.1.14
hh3cDot11CfgLBRdGroupId
Represents the load balance group ID allocated for the radio.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.25506.2.75.4.3.2.1.15
hh3cDot11CfgRRMSDRdGroupId
Represents the RRM self-decisive group ID allocated for the radio.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.25506.2.75.4.3.2.1.16
hh3cDot11CfgRadioType2
Represents the radio will work with which 802.11 radio type.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioType2.1.3.6.1.4.1.25506.2.75.4.3.2.1.17
hh3cDot11CfgIDSEnable
Represents whether intrusion detection is enabled for this radio.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.18
hh3cDot11CfgSaEnable
Represents whether spectrum analysis is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.19
hh3cDot11CfgRadioID
Represents each radio.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioScopeType.1.3.6.1.4.1.25506.2.75.4.3.2.1.2
hh3cDot11CfgSaCltRtFFTData
Represents whether to collect real-time FFT data for this radio.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.20
hh3cDot11CfgSaBand
Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be a…
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.2.1.21
hh3cDot11CfgSaRptDevType
Represents which types of interference devices should be reported.
columnBits.1.3.6.1.4.1.25506.2.75.4.3.2.1.22
hh3cDot11CfgSaTrapDevEnable
Represents whether trap is enabled for an interference device type.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.23
hh3cDot11CfgSaTrapDevType
Represents for which interference device types the AP will send traps when trap sending is enabled.
columnBits.1.3.6.1.4.1.25506.2.75.4.3.2.1.24
hh3cDot11CfgSaTrapAQEnable
Represents whether the channel quality trap is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.25
hh3cDot11CfgSaTrapAQThreshold
Represents the channel quality threshold. When the channel quality is below this value, the channel quality trap will be sent.
columnInteger32.1.3.6.1.4.1.25506.2.75.4.3.2.1.26
hh3cDot11CfgSaDrivenRRMEnable
Configures whether to run RRM when the AP detects a certain level of interference.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.27
hh3cDot11CfgSaDrivenRRMSnt
Configures the threshold for triggering RRM. When the interference level for the AP exceeds the threshold , RRM initiates local dynamic frequency selection (DFS) and changes the …
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.2.1.28
hh3cDot11CfgSPInCirMode
Specifies the committed information rate(CIR) mode for the inbound direction. This object is useful only when the corresponding CIR has a nonzero value. If the value of this objec…
columnHH3C-DOT11-REF-MIBHh3cDot11CirMode.1.3.6.1.4.1.25506.2.75.4.3.2.1.29
hh3cDot11CfgRadioPolicyName
Represents the name of radio policy.
columnOctetString.1.3.6.1.4.1.25506.2.75.4.3.2.1.3
hh3cDot11CfgSPInCirValue
Represents the CIR for the inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR m…
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.2.1.30
hh3cDot11CfgSPOutCirValue
Represents the CIR for the outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR …
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.2.1.32
hh3cDot11CfgRadioType
Represents the radio will work with which 802.11 radio type.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioType.1.3.6.1.4.1.25506.2.75.4.3.2.1.4
hh3cDot11CfgChannel
Represents the channel allocation of radio.
columnHH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType.1.3.6.1.4.1.25506.2.75.4.3.2.1.5
hh3cDot11CfgMaxTxPowerLevel
Represents the maximal transmit power scope for AP.
columndbm HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType.1.3.6.1.4.1.25506.2.75.4.3.2.1.6
hh3cDot11PreambleLen
Represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen will be val…
columnHH3C-DOT11-REF-MIBHh3cDot11PreambleType.1.3.6.1.4.1.25506.2.75.4.3.2.1.7
hh3cDot11CfgRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.2.1.8
hh3cDot11CfgRdElementID
Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.25506.2.75.4.3.2.1.9