hh3cDot11RadioToConfigEntry
HH3C-DOT11-CFG-MIB ·
.1.3.6.1.4.1.25506.2.75.4.3.2.1
Object
row
Each entry contains configuration information for each radio.
Context
- MIB
- HH3C-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.25506.2.75.4.3.2.1- Type
- row
- Status
- current
- Parent
- hh3cDot11RadioToConfigTable
- Table
- hh3cDot11RadioToConfigTable
- Children
- 32
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cDot11APTemplateNameCfg Represents the name of AP template. | column | OctetString | .1.3.6.1.4.1.25506.2.75.4.3.2.1.1 |
| hh3cDot11CfgWorkMode Represents work mode of the radio. | column | HH3C-DOT11-REF-MIBHh3cDot11WorkMode | .1.3.6.1.4.1.25506.2.75.4.3.2.1.10 |
| hh3cDot11CfgPwrAttValue Represents the value of power attenuation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.11 |
| hh3cDot11RadioTxArithmetic Represents the transmission arithmetic of the radio.
The following values are supported:
quality - Consider the quality first during the transmission.
bandwidth - Consider the b… | column | Enumeration | .1.3.6.1.4.1.25506.2.75.4.3.2.1.12 |
| hh3cDot11CfgChannelLockStat Represents locked status of channel on the radio. | column | Enumeration | .1.3.6.1.4.1.25506.2.75.4.3.2.1.13 |
| hh3cDot11CfgPowerLockStat Represents locked status of power on the radio. | column | Enumeration | .1.3.6.1.4.1.25506.2.75.4.3.2.1.14 |
| hh3cDot11CfgLBRdGroupId Represents the load balance group ID allocated for the radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.15 |
| hh3cDot11CfgRRMSDRdGroupId Represents the RRM self-decisive group ID allocated for the radio. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.16 |
| hh3cDot11CfgRadioType2 Represents the radio will work with which 802.11 radio type. | column | HH3C-DOT11-REF-MIBHh3cDot11RadioType2 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.17 |
| hh3cDot11CfgIDSEnable Represents whether intrusion detection is enabled for this radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.18 |
| hh3cDot11CfgSaEnable Represents whether spectrum analysis is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.19 |
| hh3cDot11CfgRadioID Represents each radio. | column | HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType | .1.3.6.1.4.1.25506.2.75.4.3.2.1.2 |
| hh3cDot11CfgSaCltRtFFTData Represents whether to collect real-time FFT data for this radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.20 |
| hh3cDot11CfgSaBand Represents which band of channels will be monitored when collection
real-time FFT data is enabled for this radio. Detection of
interference devices and air quality will also be a… | column | Enumeration | .1.3.6.1.4.1.25506.2.75.4.3.2.1.21 |
| hh3cDot11CfgSaRptDevType Represents which types of interference devices should be reported. | column | Bits | .1.3.6.1.4.1.25506.2.75.4.3.2.1.22 |
| hh3cDot11CfgSaTrapDevEnable Represents whether trap is enabled for an interference device type. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.23 |
| hh3cDot11CfgSaTrapDevType Represents for which interference device types the AP will send traps
when trap sending is enabled. | column | Bits | .1.3.6.1.4.1.25506.2.75.4.3.2.1.24 |
| hh3cDot11CfgSaTrapAQEnable Represents whether the channel quality trap is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.25 |
| hh3cDot11CfgSaTrapAQThreshold Represents the channel quality threshold. When the channel quality
is below this value, the channel quality trap will be sent. | column | Integer32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.26 |
| hh3cDot11CfgSaDrivenRRMEnable Configures whether to run RRM when the AP detects
a certain level of interference. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.27 |
| hh3cDot11CfgSaDrivenRRMSnt Configures the threshold for triggering RRM. When the
interference level for the AP exceeds the threshold
, RRM initiates local dynamic frequency selection (DFS)
and changes the … | column | Enumeration | .1.3.6.1.4.1.25506.2.75.4.3.2.1.28 |
| hh3cDot11CfgSPInCirMode Specifies the committed information rate(CIR) mode for the inbound direction.
This object is useful only when the corresponding CIR has a nonzero value.
If the value of this objec… | column | HH3C-DOT11-REF-MIBHh3cDot11CirMode | .1.3.6.1.4.1.25506.2.75.4.3.2.1.29 |
| hh3cDot11CfgRadioPolicyName Represents the name of radio policy. | column | OctetString | .1.3.6.1.4.1.25506.2.75.4.3.2.1.3 |
| hh3cDot11CfgSPInCirValue Represents the CIR for the inbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR m… | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.30 |
| hh3cDot11CfgSPOutCirMode Represents the committed information rate(CIR) mode for the outbound direction.
This object is useful only when the corresponding CIR has a nonzero value.
If the value of this obj… | column | HH3C-DOT11-REF-MIBHh3cDot11CirMode | .1.3.6.1.4.1.25506.2.75.4.3.2.1.31 |
| hh3cDot11CfgSPOutCirValue Represents the CIR for the outbound direction of this service policy.
If the value is 0, it means that no flow control is applied to
the service policy, and the corresponding CIR … | column | Kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.32 |
| hh3cDot11CfgRadioType Represents the radio will work with which 802.11 radio type. | column | HH3C-DOT11-REF-MIBHh3cDot11RadioType | .1.3.6.1.4.1.25506.2.75.4.3.2.1.4 |
| hh3cDot11CfgChannel Represents the channel allocation of radio. | column | HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType | .1.3.6.1.4.1.25506.2.75.4.3.2.1.5 |
| hh3cDot11CfgMaxTxPowerLevel Represents the maximal transmit power scope for AP. | column | dbm HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType | .1.3.6.1.4.1.25506.2.75.4.3.2.1.6 |
| hh3cDot11PreambleLen Represents whether use long or short preamble for 802.11 MAC
frame.
When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn,
then value for hh3cDot11PreambleLen will be val… | column | HH3C-DOT11-REF-MIBHh3cDot11PreambleType | .1.3.6.1.4.1.25506.2.75.4.3.2.1.7 |
| hh3cDot11CfgRadioStatus Represents the radio admin status whether is enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25506.2.75.4.3.2.1.8 |
| hh3cDot11CfgRdElementID Represents the element ID of this radio. It comprises two parts.
The highest 24 bits are AP element ID and the lowest 8 bits are
radio ID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.25506.2.75.4.3.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| hh3cDot11APTemplateNameCfg Represents the name of AP template. | column | OctetString | .1.3.6.1.4.1.25506.2.75.4.3.2.1.1 |
| hh3cDot11CfgRadioID Represents each radio. | column | HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType | .1.3.6.1.4.1.25506.2.75.4.3.2.1.2 |