hh3cDot11RCRadioRate

HH3C-DOT11-CFG-MIB · .1.3.6.1.4.1.25506.2.75.4.3.8.1.11
MIB view Table view

Object

column r/w OctetString 
Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X.  The data transmit rates
between AP and STA must fall into the configured rates.
(Note: For 802.11n radios, the first value will be treated as a mandatory rate,
and the second value will be treated as a supported rate.
If you configure more than two rates, the configuration cannot take effect.
If you configure only one rate, it is considered as the mandatory rate by default.)

Context

MIB
HH3C-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.25506.2.75.4.3.8.1.11
Type
column
Access
readwrite
Status
current
Parent
hh3cDot11RadioConfigEntry
Table
hh3cDot11RadioConfigTable
Siblings
20

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cDot11RCAPSerialID
This object represents the Serial ID of AP.
columnOctetString.1.3.6.1.4.1.25506.2.75.4.3.8.1.1
hh3cDot11RCRadioStatus
Represents the radio admin status whether is enabled or disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.8.1.10
hh3cDot11RCPwrAdjustStepLength
Power adjustment step-length in dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.8.1.12
hh3cDot11RCRadioType2
This object represents the radio will work with which 802.11 radio type.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioType2.1.3.6.1.4.1.25506.2.75.4.3.8.1.13
hh3cDot11RCPreambleLenCM
This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen…
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.8.1.14
hh3cDot11RCDynamicChlStateCM
Enable/Disable dynamic channel selection.
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.8.1.15
hh3cDot11RCRadioStatusCM
Represents the radio admin status whether is enabled or disabled.
columnEnumeration.1.3.6.1.4.1.25506.2.75.4.3.8.1.16
hh3cDot11RCRadioRateCM
Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format of each value can be MCS X. The data transmit rates between AP and client should…
columnOctetString.1.3.6.1.4.1.25506.2.75.4.3.8.1.17
hh3cDot11RCDynamicPowerStateCM
Enable/disable dynamic power selection for the band.
columnHH3C-DOT11-REF-MIBHh3cDot11TruthValueCM.1.3.6.1.4.1.25506.2.75.4.3.8.1.18
hh3cDot11RCRssiThresholdCM
Represents the minimum value of the RSSI. The clients with RSSI below this value will be refused to associate.
columndBm SNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.8.1.19
hh3cDot11RCRadioID
This object represents each radio.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioScopeType.1.3.6.1.4.1.25506.2.75.4.3.8.1.2
hh3cDot11RCDynamicChlStateSelfDecisiveCM
Enable/disable dynamic channel selection self decisive for the band.
columnHH3C-DOT11-REF-MIBHh3cDot11TruthValueCM.1.3.6.1.4.1.25506.2.75.4.3.8.1.20
hh3cDot11RCDynamicPowerStateSelfDecisiveCM
Enable/disable dynamic power selection self decisive for the band.
columnHH3C-DOT11-REF-MIBHh3cDot11TruthValueCM.1.3.6.1.4.1.25506.2.75.4.3.8.1.21
hh3cDot11RCRadioType
This object represents the radio will work with which 802.11 radio type.
columnHH3C-DOT11-REF-MIBHh3cDot11RadioType.1.3.6.1.4.1.25506.2.75.4.3.8.1.3
hh3cDot11RCChannel
This object represents the channel allocation of radio.
columnHH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType.1.3.6.1.4.1.25506.2.75.4.3.8.1.4
hh3cDot11RCPreambleLen
This object represents whether use long or short preamble for 802.11 MAC frame. When hh3cDot11CfgRadioType is either dot11b, dot11g or dot11gn, then value for hh3cDot11PreambleLen…
columnHH3C-DOT11-REF-MIBHh3cDot11PreambleType.1.3.6.1.4.1.25506.2.75.4.3.8.1.5
hh3cDot11RCPwrAttValue
This object represents the value of power attenuation.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.75.4.3.8.1.6
hh3cDot11RCApPowerLevel
Represents the maximal transmit power scope for AP.
columndbm HH3C-DOT11-REF-MIBHh3cDot11TxPwrLevelScopeType.1.3.6.1.4.1.25506.2.75.4.3.8.1.7
hh3cDot11RCDynamicChlState
Enable/Disable dynamic channel selection.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.8.1.8
hh3cDot11RCDynamicPowerState
Enable/Disable dynamic power selection for the band.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.75.4.3.8.1.9