FOUNDRY-SN-SWITCH-GROUP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

459

snVLanByPortTable

table deprecated

.1.3.6.1.4.1.1991.1.1.3.2.1 · 1 row entry · 28 columns

Open in standard view

If snSwGroupOperMode is configured as basic mode
which is VLAN by Port, Layer2 switching,
then this table is valid.  Each VLAN switch port
could have a number of VLAN IDs.

snVLanByPortEntry entry .1.3.6.1.4.1.1991.1.1.3.2.1.1

An entry in the VLAN By Port Information table.
snVLanByPortVLanIndex = 1 and with
snVLanByPortVLanId = 1 together implies all attributes
applying to the Global switch group i.e. noVLan.
A SNMP SET PDU for a row of the…

Indexes

snVLanByPortVLanIndex

Column Syntax OID

snVLanByPortVLanIndex deprecated

The VLAN ID index must not be greater than the
snVLanGroupVlanMaxEntry. Each VLAN Identifier can
have a membership of multiple ports.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.1.1.1

snVLanByPortVLanId deprecated

The VLAN ID index to the VLAN By Port Info Table.
Each VLAN Identifier can have a membership of multiple
ports.

Integer32r/w

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.1.1.2

snVLanByPortPortMask deprecated

The Standand-alone switch VLAN port membership. (It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.1.1.3

snVLanByPortQos deprecated

The Stand alone stackable switch VLAN Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5), …

Enumerationr/w

Enumerated Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7

.1.3.6.1.4.1.1991.1.1.3.2.1.1.4

snVLanByPortStpMode deprecated

Spanning Tree Mode in the Switch Group can be set
either enabled or disabled and the default is
enabled mode.
disable(0)...........no Spanning Tree
enableStp(1).........activate Spanning Tree
enableRstp(2)........activ…

Enumerationr/w

Enumerated Values:

0	disable
1	enableStp
2	enableRstp

.1.3.6.1.4.1.1991.1.1.3.2.1.1.5

snVLanByPortStpPriority deprecated

dot1dStpPriority : The value of the write-able
portion of the Stp ID, i.e., the first two octets
of the (8 octet long) Bridge ID. The other (last) 6
octets of the Bridge ID are given by the value of the
base bridge…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1991.1.1.3.2.1.1.6

snVLanByPortStpGroupMaxAge deprecated

dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB).
The value that all bridges use for MaxAge when
this bridge is acting as the root.
Note that 802.1D-1990 specifies that the
range for this parameter is related to the va…

Integer32r/w

Constraints:
range: 0-40

.1.3.6.1.4.1.1991.1.1.3.2.1.1.7

snVLanByPortStpGroupHelloTime deprecated

dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB).
The value that all bridges use for HelloTime when
this bridge is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An age…

Integer32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.1991.1.1.3.2.1.1.8

snVLanByPortStpGroupForwardDelay deprecated

dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB).
The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is relate…

Integer32r/w

Constraints:
range: 0-30

.1.3.6.1.4.1.1991.1.1.3.2.1.1.9

snVLanByPortRowStatus deprecated

This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an exsisti…

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.2.1.1.10

snVLanByPortOperState deprecated

By default, this mode is set to notActivated(0).
notActivated(0)...the VLAN entry is not activated and not in running mode.
activated(1)......the VLAN entry is activated and in running mode

Enumeration

Enumerated Values:

0	notActivated
1	activated

.1.3.6.1.4.1.1991.1.1.3.2.1.1.11

snVLanByPortBaseNumPorts deprecated

The number of ports controlled by this bridging
entity.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.1.1.12

snVLanByPortBaseType deprecated

Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.

Enumeration

Enumerated Values:

1	unknown
2	transparentOnly
3	sourcerouteOnly
4	srt

.1.3.6.1.4.1.1991.1.1.3.2.1.1.13

snVLanByPortStpProtocolSpecification deprecated

An indication of what version of the Spanning
Tree Protocol is being run. The value
'decLb100(2)' indicates the DEC LANbridge 100
Spanning Tree protocol. IEEE 802.1d
implementations will return 'ieee8021d(3)'. If
fut…

Enumeration

Enumerated Values:

1	unknown
2	decLb100
3	ieee8021d

.1.3.6.1.4.1.1991.1.1.3.2.1.1.14

snVLanByPortStpMaxAge deprecated

dot1dStpMaxAge: From RFC1493(Bridge MIB).
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value …

Timeout

Textual Convention: Timeout Integer32

.1.3.6.1.4.1.1991.1.1.3.2.1.1.15

snVLanByPortStpHelloTime deprecated

dot1dStpHelloTime: From RFC1493(Bridge MIB).
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of…

Timeout

Textual Convention: Timeout Integer32

.1.3.6.1.4.1.1991.1.1.3.2.1.1.16

snVLanByPortStpHoldTime deprecated

dot1dStpHoldTime: From RFC1493(Bridge MIB).
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.1.1.17

snVLanByPortStpForwardDelay deprecated

dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value dete…

Timeout

Textual Convention: Timeout Integer32

.1.3.6.1.4.1.1991.1.1.3.2.1.1.18

snVLanByPortStpTimeSinceTopologyChange deprecated

The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.2.1.1.19

snVLanByPortStpTopChanges deprecated

The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.2.1.1.20

snVLanByPortStpRootCost deprecated

dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.1.1.21

snVLanByPortStpRootPort deprecated

dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.1.1.22

snVLanByPortStpDesignatedRoot deprecated

dot1dStpDesignatedRoot: From RFC1493(Bridge MIB).
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier p…

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.1991.1.1.3.2.1.1.23

snVLanByPortBaseBridgeAddress deprecated

The MAC address used by this bridge when it must
be referred to in a unique fashion. It is
recommended that this be the numerically smallest
MAC address of all ports that belong to this
bridge. However it is only req…

FOUNDRY-SN-AGENT-MIBMacAddress

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.2.1.1.24

snVLanByPortVLanName deprecated

VLAN Community Name string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.2.1.1.25

snVLanByPortRouterIntf deprecated

Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.1.1.26

snVLanByPortChassisPortMask deprecated

The Chassis VLAN switch port membership.
(It was obsoleted after release 07100, replaced by snVLanByPortPortList)

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.1.1.27

snVLanByPortPortList deprecated

A list of port indices which are the port
membership of a VLAN By Port. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.1.1.28

snVLanByProtocolTable

table

.1.3.6.1.4.1.1991.1.1.3.2.2 · 1 row entry · 15 columns

Open in standard view

snVLanByProtocolEntry entry .1.3.6.1.4.1.1991.1.1.3.2.2.1

An entry in the VLAN By Protocol Configuration table.

Indexes

snVLanByProtocolVLanId snVLanByProtocolIndex

Column Syntax OID

snVLanByProtocolVLanId

The VLAN ID index to both of the VLAN By Port Info Table
and this table.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.2.1.1

snVLanByProtocolIndex

The following IP/IPX protocol VLAN types are operated
in Layer3 VLAN such as : ip(1), ipx(2), ipv6(7)
The following are operated in Layer2 bridging such as:
appleTalk(3), decNet(4), netBios(5),
others(6) -- other proto…

Enumeration

Enumerated Values:

1	ip
2	ipx
3	appleTalk
4	decNet
5	netBios
6	others
7	ipv6

.1.3.6.1.4.1.1991.1.1.3.2.2.1.2

snVLanByProtocolDynamic

disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.2.2.1.3

snVLanByProtocolStaticMask deprecated

The Standand-alone switch Protocol VLAN port membership applied in static mode.
(It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.4

snVLanByProtocolExcludeMask deprecated

The Standand-alone switch Protocol VLAN port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.5

snVLanByProtocolRouterIntf

Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.

Integer32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.1991.1.1.3.2.2.1.6

snVLanByProtocolRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.2.2.1.7

snVLanByProtocolDynamicMask deprecated

The Standand-alone switch Protocol VLAN active port membership.
(It was obsoleted for Chassis Product)

PortMask

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.8

snVLanByProtocolChassisStaticMask deprecated

The Chassis Protocol VLAN port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByProtocolStaticPortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.9

snVLanByProtocolChassisExcludeMask deprecated

The Chassis Protocol VLAN port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByProtocolExcludePortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.10

snVLanByProtocolChassisDynamicMask deprecated

The Chassis Protocol VLAN active port membership.
(It was obsoleted after release 07100, replaced by snVLanByProtocolDynamicPortList)

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.11

snVLanByProtocolVLanName

VLAN Community Name string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.2.2.1.12

snVLanByProtocolStaticPortList

A list of port indices which are the configured port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.2.1.13

snVLanByProtocolExcludePortList

A list of port indices which are the excluded from port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.2.1.14

snVLanByProtocolDynamicPortList

A list of port indices which are dynamically joining the port
membership of the Protocol VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetString

.1.3.6.1.4.1.1991.1.1.3.2.2.1.15

snVLanByIpSubnetTable

table

.1.3.6.1.4.1.1991.1.1.3.2.3 · 1 row entry · 16 columns

Open in standard view

An entry of the VLAN By IPX Network Number Table.

snVLanByIpSubnetEntry entry .1.3.6.1.4.1.1991.1.1.3.2.3.1

An entry in the VLAN By IP Subnet Configuration table.

Indexes

snVLanByIpSubnetVLanId snVLanByIpSubnetIpAddress snVLanByIpSubnetSubnetMask

Column Syntax OID

snVLanByIpSubnetVLanId

The VLAN ID index to both of the VLAN By Port Info Table
and this table.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.3.1.1

snVLanByIpSubnetIpAddress

Subnet IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.2.3.1.2

snVLanByIpSubnetSubnetMask

Subnet mask associated with the Subnet IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.2.3.1.3

snVLanByIpSubnetDynamic

disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.2.3.1.4

snVLanByIpSubnetStaticMask deprecated

The Standand-alone switch VLAN By Subnet port membership applied in static mode.
(It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.5

snVLanByIpSubnetExcludeMask deprecated

The Standand-alone switch VLAN By Subnet port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.6

snVLanByIpSubnetRouterIntf

Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.

Integer32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.1991.1.1.3.2.3.1.7

snVLanByIpSubnetRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.2.3.1.8

snVLanByIpSubnetDynamicMask deprecated

The Standand-alone switch VLAN By Subnet active port membership.
(It was obsoleted for Chassis Product)

PortMask

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.9

snVLanByIpSubnetChassisStaticMask deprecated

The Chassis VLAN By Subnet port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetStaticPortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.10

snVLanByIpSubnetChassisExcludeMask deprecated

The Chassis VLAN By Subnet port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetExcludePortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.11

snVLanByIpSubnetChassisDynamicMask deprecated

The Chassis VLAN By Subnet active port membership.
(It was obsoleted after release 07100, replaced by snVLanByIpSubnetDynamicPortList)

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.12

snVLanByIpSubnetVLanName

VLAN Community Name string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.2.3.1.13

snVLanByIpSubnetStaticPortList

A list of port indices which are the configured port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.3.1.14

snVLanByIpSubnetExcludePortList

A list of port indices which are the excluded from port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.3.1.15

snVLanByIpSubnetDynamicPortList

A list of port indices which are dynamically joining the port
membership of the VLAN By IP Subnet. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetString

.1.3.6.1.4.1.1991.1.1.3.2.3.1.16

snVLanByIpxNetTable

table

.1.3.6.1.4.1.1991.1.1.3.2.4 · 1 row entry · 16 columns

Open in standard view

An entry of the VLAN By IPX Network Number Table.

snVLanByIpxNetEntry entry .1.3.6.1.4.1.1991.1.1.3.2.4.1

An entry in the VLAN By Ipx Network Number Configuration table.

Indexes

snVLanByIpxNetVLanId snVLanByIpxNetNetworkNum snVLanByIpxNetFrameType

Column Syntax OID

snVLanByIpxNetVLanId

The VLAN ID index to both of the VLAN By Port Info Table
and this table.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.4.1.1

snVLanByIpxNetNetworkNum

IPX Network Number.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.1991.1.1.3.2.4.1.2

snVLanByIpxNetFrameType

The following IPX Frame types are operated
in Layer3 VLAN such as :
ipxEthernet8022(1), ipxEthernet8023(2),
ipxEthernetII(3), ipxEthernetSnap(4).
choose notApplicable(0) for other protocols.
Note: Each Network Number…

Enumeration

Enumerated Values:

0	notApplicable
1	ipxEthernet8022
2	ipxEthernet8023
3	ipxEthernetII
4	ipxEthernetSnap

.1.3.6.1.4.1.1991.1.1.3.2.4.1.3

snVLanByIpxNetDynamic

disabled(0) : disabled dynamic port inclusion - applied to switch only.
enabled(1) : enabled dynamic port inclusion - applied to switch only.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.2.4.1.4

snVLanByIpxNetStaticMask deprecated

The VLAN By IPX network port membership applied in static mode.
(It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.5

snVLanByIpxNetExcludeMask deprecated

The VLAN By IPX network port membership applied in exclusive mode.
(It was obsoleted for Chassis Product)

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.6

snVLanByIpxNetRouterIntf

Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.

Integer32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.1991.1.1.3.2.4.1.7

snVLanByIpxNetRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.2.4.1.8

snVLanByIpxNetDynamicMask deprecated

The VLAN By IPX network active port membership.
(It was obsoleted for Chassis Product)

PortMask

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.9

snVLanByIpxNetChassisStaticMask deprecated

The Chassis VLAN By IPX network port membership applied in static mode.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetStaticPortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.10

snVLanByIpxNetChassisExcludeMask deprecated

The Chassis VLAN By IPX network port membership applied in exclusive mode.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetExcludePortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.11

snVLanByIpxNetChassisDynamicMask deprecated

The Chassis VLAN By IPX network active port membership.
(It was obsoleted after release 07100, replaced by snVLanByIpxNetDynamicPortList)

OctetString

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.12

snVLanByIpxNetVLanName

VLAN Community Name string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.2.4.1.13

snVLanByIpxNetStaticPortList

A list of port indices which are the configured port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.4.1.14

snVLanByIpxNetExcludePortList

A list of port indices which are the excluded from port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.4.1.15

snVLanByIpxNetDynamicPortList

A list of port indices which are dynamically joining the port
membership of the VLAN By IPX network. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetString

.1.3.6.1.4.1.1991.1.1.3.2.4.1.16

snVLanByATCableTable

table

.1.3.6.1.4.1.1991.1.1.3.2.5 · 1 row entry · 7 columns

Open in standard view

A Table Of VLAN By AppleTalk Network Number.

snVLanByATCableEntry entry .1.3.6.1.4.1.1991.1.1.3.2.5.1

An entry of the AppleTalk Cable VLAN table.

Indexes

snVLanByATCableVLanId snVLanByATCableIndex

Column Syntax OID

snVLanByATCableVLanId

The VLAN ID of a PORT VLAN of which the AppleTalk Cable
VLAN was attaching to.

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.5.1.1

snVLanByATCableIndex

AppleTalk Cable VLAN index number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.5.1.2

snVLanByATCableRouterIntf

A virtual router interface to the AppleTalk Cable VLAN,
only router products accept the SNMP-SET operation. The
value zero indicates that virtual router interface was
not configured.

Integer32r/w

Constraints:
range: 0-60

.1.3.6.1.4.1.1991.1.1.3.2.5.1.3

snVLanByATCableRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.2.5.1.4

snVLanByATCableChassisStaticMask deprecated

A list of ports which are statically configured to
become port members of a VLAN.
(It was obsoleted after release 07100, replaced by snVLanByATCableStaticPortList)

OctetStringr/w

Constraints:
range: 32-32

.1.3.6.1.4.1.1991.1.1.3.2.5.1.5

snVLanByATCableVLanName

VLAN Name string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.2.5.1.6

snVLanByATCableStaticPortList

A list of port indices which are the configured port
membership of the AppleTalk Cable VLAN. Each port index is a
16-bit integer in big endian order. 8-bit is the slot number,
the other 8-bit is the port number.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.2.5.1.7

snVLanByPortMemberTable

table

.1.3.6.1.4.1.1991.1.1.3.2.6 · 1 row entry · 4 columns

Open in standard view

Port VLAN (Layer 2 VLAN) port membership table.

snVLanByPortMemberEntry entry .1.3.6.1.4.1.1991.1.1.3.2.6.1

An entry of the port VLAN membership table.

Indexes

snVLanByPortMemberVLanId snVLanByPortMemberPortId

Column Syntax OID

snVLanByPortMemberVLanId

The VLAN identifier (VLAN ID).

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.6.1.1

snVLanByPortMemberPortId

The ifIndex which is a member of the port VLAN.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.6.1.2

snVLanByPortMemberRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.2.6.1.3

snVLanByPortMemberTagMode

Configure an interface as tagged member of non-default VLAN,
untagged VLAN membership of the interface will not be modified,
be it is default-VLAN or non-default VLAN. Configure an interface
as untagged member of non-de…

Enumerationr/w

Enumerated Values:

1	tagged
2	untagged

.1.3.6.1.4.1.1991.1.1.3.2.6.1.4

snVLanByPortCfgTable

table

.1.3.6.1.4.1.1991.1.1.3.2.7 · 1 row entry · 27 columns

Open in standard view

Port VLAN (Layer 2 VLAN) configuration table.

snVLanByPortCfgEntry entry .1.3.6.1.4.1.1991.1.1.3.2.7.1

An entry of the port VLAN configuration table.

Indexes

snVLanByPortCfgVLanId

Column Syntax OID

snVLanByPortCfgVLanId

The VLAN identifier (VLAN ID).

Integer32

Constraints:
range: 1-4095

.1.3.6.1.4.1.1991.1.1.3.2.7.1.1

snVLanByPortCfgQos

The Stand alone stackable switch VLAN Priority values are:
level0(0) -- low prority
level1(1) -- high prority.
The BigIron switch VLAN Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5…

PortQosTCr/w

Textual Convention: PortQosTC Enumeration

Type Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7
127	invalid

.1.3.6.1.4.1.1991.1.1.3.2.7.1.2

snVLanByPortCfgStpMode

Enumerationr/w

Enumerated Values:

0	disable
1	enableStp
2	enableRstp

.1.3.6.1.4.1.1991.1.1.3.2.7.1.3

snVLanByPortCfgStpPriority

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1991.1.1.3.2.7.1.4

snVLanByPortCfgStpGroupMaxAge

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.5

snVLanByPortCfgStpGroupHelloTime

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.6

snVLanByPortCfgStpGroupForwardDelay

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.7

snVLanByPortCfgBaseNumPorts

The number of ports controlled by this bridging
entity.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.8

snVLanByPortCfgBaseType

Indicates what type of bridging this bridge can
perform. If a bridge is actually performing a
certain type of bridging this will be indicated by
entries in the port table for the given type.

Enumeration

Enumerated Values:

1	unknown
2	transparentOnly
3	sourcerouteOnly
4	srt

.1.3.6.1.4.1.1991.1.1.3.2.7.1.9

snVLanByPortCfgStpProtocolSpecification

Enumeration

Enumerated Values:

1	unknown
2	decLb100
3	ieee8021d

.1.3.6.1.4.1.1991.1.1.3.2.7.1.10

snVLanByPortCfgStpMaxAge

Timeout

Textual Convention: Timeout Integer32

.1.3.6.1.4.1.1991.1.1.3.2.7.1.11

snVLanByPortCfgStpHelloTime

Timeout

Textual Convention: Timeout Integer32

.1.3.6.1.4.1.1991.1.1.3.2.7.1.12

snVLanByPortCfgStpHoldTime

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.13

snVLanByPortCfgStpForwardDelay

Timeout

Textual Convention: Timeout Integer32

.1.3.6.1.4.1.1991.1.1.3.2.7.1.14

snVLanByPortCfgStpTimeSinceTopologyChange

The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.2.7.1.15

snVLanByPortCfgStpTopChanges

The total number of topology changes detected by
this bridge since the management entity was last
reset or initialized.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.2.7.1.16

snVLanByPortCfgStpRootCost

dot1dStpRootCost: From RFC1493(Bridge MIB).
The cost of the path to the root as seen from
this bridge.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.17

snVLanByPortCfgStpRootPort

dot1dStpRootPort: From RFC1493(Bridge MIB).
The port number of the port which offers the
lowest cost path from this bridge to the root
bridge.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.18

snVLanByPortCfgStpDesignatedRoot

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.1991.1.1.3.2.7.1.19

snVLanByPortCfgBaseBridgeAddress

FOUNDRY-SN-AGENT-MIBMacAddress

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.2.7.1.20

snVLanByPortCfgVLanName

VLAN Community Name string.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.2.7.1.21

snVLanByPortCfgRouterIntf

Optional: A virtual interface for router to the VLAN -- applied to router only.
If a SNMP-Get value is zero, that means this object was not configured.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.22

snVLanByPortCfgRowStatus

Use object to delete a vlan entry.

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete

.1.3.6.1.4.1.1991.1.1.3.2.7.1.23

snVLanByPortCfgStpVersion

The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning
Tree Protocol…

Enumerationr/w

Enumerated Values:

0	stpCompatible
2	rstp

.1.3.6.1.4.1.1991.1.1.3.2.7.1.24

snVLanByPortCfgInOctets deprecated

The number of bytes received on this VLAN. This can be used as the per VE
couter, if there is one-to-one map for VLAN-VE.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.2.7.1.25

snVLanByPortCfgMcastMode

Multicast (IGMP snooping) mode on the VLAN can be set
either active or passive or disabled and the default is
disabled.
disabled(0)..... IP Multicast is disabled on this VLAN
active(1)........this VLAN generates IG…

Enumerationr/w

Enumerated Values:

0	disabled
1	active
2	passive

.1.3.6.1.4.1.1991.1.1.3.2.7.1.26

snVLanByPortCfgMcastVersion

Multicast version at this VLAN can be set
2 or 3, and the default is 2. The initial value is 0

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.2.7.1.27

snSwPortInfoTable

table deprecated

.1.3.6.1.4.1.1991.1.1.3.3.1 · 1 row entry · 66 columns

Open in standard view

A specific snSwPortInfo group consists of a number of 
switch ports.

snSwPortInfoEntry entry .1.3.6.1.4.1.1991.1.1.3.3.1.1

An entry in the snSwPortInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snSwPortInfoTable requires the entired
sequence of the MIB Objects in each
snSwPortInfoEntry stored…

Indexes

snSwPortInfoPortNum

Column Syntax OID

snSwPortInfoPortNum deprecated

The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.1

snSwPortInfoMonitorMode deprecated

DEPRECATED by snSwPortInfoMirrorMode and
snPortMonitorTable.

Enumerationr/w

Enumerated Values:

0	disabled
1	input
2	output
3	both

.1.3.6.1.4.1.1991.1.1.3.3.1.1.2

snSwPortInfoTagMode deprecated

For tagged port, we could have multiple VLANs
per port. For untagged port or auto port, there
is only one VLAN ID per port.

Enumerationr/w

Enumerated Values:

1	tagged
2	untagged
3	auto
4	disabled

.1.3.6.1.4.1.1991.1.1.3.3.1.1.3

snSwPortInfoChnMode deprecated

The port can be configured to operate in either
half or full duplex mode. The values are:
halfDuplex(1)...half duplex mode
fullDuplex(2)...full duplex mode
The read-back channel status from hardware are:
none(0).....…

Enumerationr/w

Enumerated Values:

0	none
1	halfDuplex
2	fullDuplex

.1.3.6.1.4.1.1991.1.1.3.3.1.1.4

snSwPortInfoSpeed deprecated

The speed configuration for a port. The values are:
none(0)..........link down or no traffic.
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
s10M(2)..........10Mbits per second.
s100M(3).........100Mbits per second.
s1G(…

Enumerationr/w

Enumerated Values:

0	none
1	sAutoSense
2	s10M
3	s100M
4	s1G
5	s1GM
6	s155M
7	s10G
8	s622M
9	s2488M
10	s9953M
11	s16G
13	s40G
14	s2500M
15	s5000M
16	s100G
17	s25G

.1.3.6.1.4.1.1991.1.1.3.3.1.1.5

snSwPortInfoMediaType deprecated

The media type for the port. The
values are:
other(1).........other or unknown media.
m100BaseTX(2)....100Mbits per second copper.
m100BaseFX(3)....100Mbits per second fiber.
m1000BaseFX(4)...1Gbits per second f…

Enumeration

Enumerated Values:

1	other
2	m100BaseTX
3	m100BaseFX
4	m1000BaseFX
5	mT3
6	m155ATM
7	m1000BaseTX
8	m622ATM
9	m155POS
10	m622POS
11	m2488POS
12	m10000BaseFX
13	m9953POS
14	m16GStacking
16	m40GStacking
19	m2500BaseTX
20	m100GBaseTX
21	mMultiGigBZ
22	m40GBaseTX
23	m25GBaseFX

.1.3.6.1.4.1.1991.1.1.3.3.1.1.6

snSwPortInfoConnectorType deprecated

The type of connector that the port offers.
The values are:
other(1)...........other or unknown connector
copper(2)..........Copper connector
fiber(3)...........Fiber connector
This describes the physical connector t…

Enumeration

Enumerated Values:

1	other
2	copper
3	fiber

.1.3.6.1.4.1.1991.1.1.3.3.1.1.7

snSwPortInfoAdminStatus deprecated

The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.1991.1.1.3.3.1.1.8

snSwPortInfoLinkStatus deprecated

The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)

Enumeration

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.1991.1.1.3.3.1.1.9

snSwPortInfoPortQos deprecated

The Stand alone stackable switch Port Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron Port Qos Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5),…

Enumerationr/w

Enumerated Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7

.1.3.6.1.4.1.1991.1.1.3.3.1.1.10

snSwPortInfoPhysAddress deprecated

The port physical address. The physical address
represents the switch port.

PhysAddress

Textual Convention: PhysAddress OctetString

.1.3.6.1.4.1.1991.1.1.3.3.1.1.11

snSwPortStatsInFrames deprecated

The total number of packets received on the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.12

snSwPortStatsOutFrames deprecated

The total number of packets transmitted out of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.13

snSwPortStatsAlignErrors deprecated

dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.

The count represented by an instance o…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.14

snSwPortStatsFCSErrors deprecated

dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.

The count represented by an instance of this
obj…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.15

snSwPortStatsMultiColliFrames deprecated

dot3StatsMultipleCollisionFrames :
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.

A frame that is counted by an insta…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.16

snSwPortStatsFrameTooLongs deprecated

dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.

The count represented by an instance of this
object is incremented when the fr…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.17

snSwPortStatsTxColliFrames deprecated

A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.

A frame that is counted by a combination of
both dot3StatsSingleCollisi…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.18

snSwPortStatsRxColliFrames deprecated

A count of successfully received frames on
a particular interface for which transmission
is inhibited by more than one collision. This
object is not specified in dot3 but it has the
same functionarity as snSwPortStatsT…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.19

snSwPortStatsFrameTooShorts deprecated

A count of frames received on a particular
interface that below the minimum permitted
frame size.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.20

snSwPortLockAddressCount deprecated

The number of source MAC addresses are allowed
for a port. Writing 0 to this object will allow
any number of addresses.

Integer32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.1991.1.1.3.3.1.1.21

snSwPortStpPortEnable deprecated

The enabled/disabled status of the port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.1.1.22

snSwPortDhcpGateListId deprecated

The ID for a DHCP gateway list entry relative
to this switch port. 0 = unset or no assigned ID

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.3.1.1.23

snSwPortName deprecated

Port Name string.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1991.1.1.3.3.1.1.24

snSwPortStatsInBcastFrames deprecated

The total number of broadcast packets received on the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.25

snSwPortStatsOutBcastFrames deprecated

The total number of broadcast packets transmitted out of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.26

snSwPortStatsInMcastFrames deprecated

The total number of multicast packets received on the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.27

snSwPortStatsOutMcastFrames deprecated

The total number of multicast packets transmitted out of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.28

snSwPortStatsInDiscard deprecated

The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.29

snSwPortStatsOutDiscard deprecated

The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.30

snSwPortStatsMacStations deprecated

The total number of MAC Stations connected to the interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.31

snSwPortCacheGroupId deprecated

Cache Group ID for the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.32

snSwPortTransGroupId deprecated

Transparent Group ID for the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.33

snSwPortInfoAutoNegotiate deprecated

This feature only applies to Gigabit Ethernet ports. If set to
disable(0), port will be put to non-negotiation mode. If set to
enable(1), port will start auto-negotiation indefinitely until
succeed. If set to negFullAut…

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled
2	negFullAuto
3	global
4	other

.1.3.6.1.4.1.1991.1.1.3.3.1.1.34

snSwPortInfoFlowControl deprecated

Enable/Disbale port flow control.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.1.1.35

snSwPortInfoGigType deprecated

The media type for the port. The
values are:
m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver.
m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km).
m10…

Enumeration

Enumerated Values:

0	m1000BaseSX
1	m1000BaseLX
2	m1000BaseLH
3	m1000BaseLHA
4	m1000BaseLHB
5	m1000BaseTX
6	m10000BaseSR
7	m10000BaseLR
8	m10000BaseER
9	sfpCWDM1470nm80Km
10	sfpCWDM1490nm80Km
11	sfpCWDM1510nm80Km
12	sfpCWDM1530nm80Km
13	sfpCWDM1550nm80Km
14	sfpCWDM1570nm80Km
15	sfpCWDM1590nm80Km
16	sfpCWDM1610nm80Km
17	sfpCWDM1470nm100Km
18	sfpCWDM1490nm100Km
19	sfpCWDM1510nm100Km
20	sfpCWDM1530nm100Km
21	sfpCWDM1550nm100Km
22	sfpCWDM1570nm100Km
23	sfpCWDM1590nm100Km
24	sfpCWDM1610nm100Km
25	m1000BaseLHX
26	m1000BaseSX2
27	m1000BaseGBXU
28	m1000BaseGBXD
50	m2500BaseTX
51	m100GBaseTX
52	mMultiGigBZ
53	m40GBaseTX
54	m25GBaseFX
255	notApplicable

.1.3.6.1.4.1.1991.1.1.3.3.1.1.36

snSwPortStatsLinkChange deprecated

The total number of link state change of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.37

snSwPortIfIndex deprecated

In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.38

snSwPortDescr deprecated

A textual string containing the slot/port information
about the interface.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.3.1.1.39

snSwPortInOctets deprecated

The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string is in big-endian byte order.

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.1991.1.1.3.3.1.1.40

snSwPortOutOctets deprecated

The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octet string is in big-endian byte order.

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.1991.1.1.3.3.1.1.41

snSwPortStatsInBitsPerSec deprecated

The number of bits per second received on the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.42

snSwPortStatsOutBitsPerSec deprecated

The number of bits per second transmitted out of the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.43

snSwPortStatsInPktsPerSec deprecated

The number of packets per second received on the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.44

snSwPortStatsOutPktsPerSec deprecated

The number of packets per second transmitted out of the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.45

snSwPortStatsInUtilization deprecated

The input network utilization in hundredths of a percent
over a 5 minutes interval.

Integer32

Constraints:
range: 0-10000

.1.3.6.1.4.1.1991.1.1.3.3.1.1.46

snSwPortStatsOutUtilization deprecated

The output network utilization in hundredths of a percent
over a 5 minutes interval.

Integer32

Constraints:
range: 0-10000

.1.3.6.1.4.1.1991.1.1.3.3.1.1.47

snSwPortFastSpanPortEnable deprecated

The enabled/disabled fast span port status of the port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.1.1.48

snSwPortFastSpanUplinkEnable deprecated

The enabled/disabled fast span uplink status of the port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.1.1.49

snSwPortVlanId deprecated

The ID of a VLAN of which this port is a member. Port must
be untagged. For tagged port which belongs to multiple
VLANs, this object return 0 which is an invalid VLAN ID
value.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.1991.1.1.3.3.1.1.50

snSwPortRouteOnly deprecated

Enable/Disable L2 switching of a routing switch port.
By default, the routing switch performs routing first.
If routing failed, it performs switching. Enable route
only instrcuts the routing switch to perform routing
on…

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.1.1.51

snSwPortPresent deprecated

Indicate if the port is absent or present.
This object only valid for M4 module

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.1991.1.1.3.3.1.1.52

snSwPortGBICStatus deprecated

Indicate if the gig port has GBICs on them.
If set to GBIC(1), it means that the port is GBIC.
If set to miniGBIC(2), it means that the port miniGBIC.
If set to empty(3), it means that the GBIC is missing.
Value other…

Enumeration

Enumerated Values:

1	gbic
2	miniGBIC
3	empty
4	other

.1.3.6.1.4.1.1991.1.1.3.3.1.1.53

snSwPortStatsInKiloBitsPerSec deprecated

Bit rate in kilobits per second received on the 10G and faster interface
over a 5 minutes interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.54

snSwPortStatsOutKiloBitsPerSec deprecated

Bit rate in kilobits per second transmitted out of the 10G and faster interface
over a 5 minutes interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.1.1.55

snSwPortLoadInterval deprecated

The time in seconds for which average port utilization should be carried out.
The value should be incremental of 30 seconds, between the ranges specified.

Integer32r/w

Constraints:
range: 30-300

.1.3.6.1.4.1.1991.1.1.3.3.1.1.56

snSwPortTagType deprecated

The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.57

snSwPortInLinePowerControl deprecated

Control inline power on/off to a port. If a port does not
have inline power capability, reading this object returns
'other(1)'.

Enumerationr/w

Enumerated Values:

1	other
2	disable
3	enable
4	enableLegacyDevice

.1.3.6.1.4.1.1991.1.1.3.3.1.1.58

snSwPortInLinePowerWattage deprecated

Adjust the inline power wattage. Valid value between
1000 and 15400. Each unit is milliwatts.
This object can only be set after snSwPortInLinePowerControl
has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If
a po…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.59

snSwPortInLinePowerClass deprecated

Adjust the inline power class. This object can only be set
after snSwPortInLinePowerControl has been set to 'enable(3)'
or 'enableLegacyDevice(4)'. If a port does not have inline
power capability, reading this object re…

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.1991.1.1.3.3.1.1.60

snSwPortInLinePowerPriority deprecated

Inline power allocation priority for the power device
0- Not a POE port, 1- Critical, 2- High, 3- Low,
4- Medium, 5- other.

Enumerationr/w

Enumerated Values:

0	invalid
1	critical
2	high
3	low
4	medium
5	other

.1.3.6.1.4.1.1991.1.1.3.3.1.1.61

snSwPortInfoMirrorMode deprecated

Enable/disable mirror on this port.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.1991.1.1.3.3.1.1.62

snSwPortStatsInJumboFrames deprecated

The total number of jumbo packets received on the interface.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.1.1.63

snSwPortStatsOutJumboFrames deprecated

The total number of jumbo packets transmitted out of the interface.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.1.1.64

snSwPortInLinePowerConsumed deprecated

Inline power consumed by the port. Each unit is milliwatts.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.1.1.66

snSwPortInLinePowerPDType deprecated

Inline Power device type 802.3af or Legacy device.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.3.1.1.67

snInterfaceLookupTable

table

.1.3.6.1.4.1.1991.1.1.3.3.3 · 1 row entry · 2 columns

Open in standard view

snInterfaceLookupEntry entry .1.3.6.1.4.1.1991.1.1.3.3.3.1

Indexes

snInterfaceLookupInterfaceId

Column	Syntax	OID
snInterfaceLookupInterfaceId	InterfaceId Textual Convention: InterfaceId `ObjectIdentifier`	`.1.3.6.1.4.1.1991.1.1.3.3.3.1.1`
snInterfaceLookupIfIndex	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.3.3.1.2`

snIfIndexLookupTable

table

.1.3.6.1.4.1.1991.1.1.3.3.4 · 1 row entry · 2 columns

Open in standard view

snIfIndexLookupEntry entry .1.3.6.1.4.1.1991.1.1.3.3.4.1

Indexes

snIfIndexLookupIfIndex

Column	Syntax	OID
snIfIndexLookupIfIndex	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.3.4.1.1`
snIfIndexLookupInterfaceId	InterfaceId Textual Convention: InterfaceId `ObjectIdentifier`	`.1.3.6.1.4.1.1991.1.1.3.3.4.1.2`

snSwIfInfoTable

table

.1.3.6.1.4.1.1991.1.1.3.3.5 · 1 row entry · 69 columns

Open in standard view

A specific snSwIfInfo group consists of a number of 
switch ports.

snSwIfInfoEntry entry .1.3.6.1.4.1.1991.1.1.3.3.5.1

An entry in the snSwIfInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snSwIfInfoTable requires the entire
sequence of the MIB Objects in each
snSwIfInfoEntry stored in one…

Indexes

snSwIfInfoPortNum

Column Syntax OID

snSwIfInfoPortNum

The port/interface index (ifindex).

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.5.1.1

snSwIfInfoMonitorMode deprecated

DEPRECATED by snSwIf2MirrorMode and
snPortMonitorTable.

Enumerationr/w

Enumerated Values:

0	disabled
1	input
2	output
3	both

.1.3.6.1.4.1.1991.1.1.3.3.5.1.2

snSwIfInfoMirrorPorts

The list of port/interface index (ifindex), which mirror this interface,
when monitoring is enabled.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.3.5.1.3

snSwIfInfoTagMode

Enumerationr/w

Enumerated Values:

1	tagged
2	untagged
3	dual

.1.3.6.1.4.1.1991.1.1.3.3.5.1.4

snSwIfInfoTagType

The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.5.1.5

snSwIfInfoChnMode

Enumerationr/w

Enumerated Values:

0	none
1	halfDuplex
2	fullDuplex

.1.3.6.1.4.1.1991.1.1.3.3.5.1.6

snSwIfInfoSpeed

Enumerationr/w

Enumerated Values:

0	none
1	sAutoSense
2	s10M
3	s100M
4	s1G
5	s1GM
6	s155M
7	s10G
8	s622M
9	s2488M
10	s9953M
11	s16G
12	sOpticBased
13	s40G
14	s2500M
15	s5000M
16	s100G
17	s25G

.1.3.6.1.4.1.1991.1.1.3.3.5.1.7

snSwIfInfoMediaType

Enumeration

Enumerated Values:

1	other
2	m100BaseTX
3	m100BaseFX
4	m1000BaseFX
5	mT3
6	m155ATM
7	m1000BaseTX
8	m622ATM
9	m155POS
10	m622POS
11	m2488POS
12	m10000BaseFX
13	m9953POS
14	m16GStacking
16	m40GStacking
19	m2500BaseTX
20	m100GBaseTX
21	mMultiGigBZ
22	m40GBaseTX
23	m25GBaseFX

.1.3.6.1.4.1.1991.1.1.3.3.5.1.8

snSwIfInfoConnectorType

Enumeration

Enumerated Values:

1	other
2	copper
3	fiber

.1.3.6.1.4.1.1991.1.1.3.3.5.1.9

snSwIfInfoAdminStatus

The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.1991.1.1.3.3.5.1.10

snSwIfInfoLinkStatus

The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)

Enumeration

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.4.1.1991.1.1.3.3.5.1.11

snSwIfInfoPortQos

Enumerationr/w

Enumerated Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7

.1.3.6.1.4.1.1991.1.1.3.3.5.1.12

snSwIfInfoPhysAddress

The port physical address. The physical address
represents the switch port.

PhysAddress

Textual Convention: PhysAddress OctetString

.1.3.6.1.4.1.1991.1.1.3.3.5.1.13

snSwIfLockAddressCount

The number of source MAC addresses are allowed
for a port. Writing 0 to this object will allow
any number of addresses.

Integer32r/w

Constraints:
range: 0-2048

.1.3.6.1.4.1.1991.1.1.3.3.5.1.14

snSwIfStpPortEnable

The enabled/disabled status of the port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.5.1.15

snSwIfDhcpGateListId

The ID for a DHCP gateway list entry relative
to this switch port. 0 = unset or no assigned ID

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.3.5.1.16

snSwIfName

Port Name string.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1991.1.1.3.3.5.1.17

snSwIfDescr

A textual string containing the slot/port information
about the interface.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.3.5.1.18

snSwIfInfoAutoNegotiate

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled
2	negFullAuto
3	global
4	other

.1.3.6.1.4.1.1991.1.1.3.3.5.1.19

snSwIfInfoFlowControl

Enable/Disbale port flow control.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.5.1.20

snSwIfInfoGigType

Enumeration

Enumerated Values:

0	m1000BaseSX
1	m1000BaseLX
2	m1000BaseLH
3	m1000BaseLHA
4	m1000BaseLHB
5	m1000BaseTX
6	m10000BaseSR
7	m10000BaseLR
8	m10000BaseER
9	sfpCWDM1470nm80Km
10	sfpCWDM1490nm80Km
11	sfpCWDM1510nm80Km
12	sfpCWDM1530nm80Km
13	sfpCWDM1550nm80Km
14	sfpCWDM1570nm80Km
15	sfpCWDM1590nm80Km
16	sfpCWDM1610nm80Km
17	sfpCWDM1470nm100Km
18	sfpCWDM1490nm100Km
19	sfpCWDM1510nm100Km
20	sfpCWDM1530nm100Km
21	sfpCWDM1550nm100Km
22	sfpCWDM1570nm100Km
23	sfpCWDM1590nm100Km
24	sfpCWDM1610nm100Km
25	m1000BaseLHX
26	m1000BaseSX2
27	mSFP1000BaseBXU
28	mSFP1000BaseBXD
29	mSFP100BaseBX
30	mSFP100BaseBXU
31	mSFP100BaseBXD
32	mSFP100BaseFX
33	mSFP100BaseFXIR
34	mSFP100BaseFXLR
35	m1000BaseLMC
36	mXFP10000BaseSR
37	mXFP10000BaseLR
38	mXFP10000BaseER
39	mXFP10000BaseSW
40	mXFP10000BaseLW
41	mXFP10000BaseEW
42	mXFP10000BaseCX4
43	mXFP10000BaseZR
44	mXFP10000BaseZRD
45	m1000BaseC6553
46	mXFP10000BaseSRSW
47	mXFP10000BaseLRLW
48	mXFP10000BaseEREW
49	m10000BaseT
50	m2500BaseTX
51	m100GBaseTX
52	mMultiGigBZ
53	m40GBaseTX
54	m25GBaseFX
127	m1000BaseGBXU
128	m1000BaseGBXD
129	m1000BaseFBX
130	m1000BaseFBXU
131	m1000BaseFBXD
132	m1000BaseFX
133	m1000BaseFXIR
134	m1000BaseFXLR
136	m1000BaseXGSR
137	m1000BaseXGLR
138	m1000BaseXGER
139	m1000BaseXGSW
140	m1000BaseXGLW
141	m1000BaseXGEW
142	m1000BaseXGCX4
143	m1000BaseXGZR
144	m1000BaseXGZRD
255	notApplicable

.1.3.6.1.4.1.1991.1.1.3.3.5.1.21

snSwIfFastSpanPortEnable

The enabled/disabled fast span port status of the port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.5.1.22

snSwIfFastSpanUplinkEnable

The enabled/disabled fast span uplink status of the port.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.5.1.23

snSwIfVlanId deprecated

This object return 0 due to no support for this object from FI 08.0.80 release.
Write operation not-supported for this object.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.1991.1.1.3.3.5.1.24

snSwIfRouteOnly

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.3.5.1.25

snSwIfPresent

Indicate if the port is absent or present.
This object only valid for M4 module.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.1991.1.1.3.3.5.1.26

snSwIfGBICStatus

Enumeration

Enumerated Values:

1	gbic
2	miniGBIC
3	empty
4	other

.1.3.6.1.4.1.1991.1.1.3.3.5.1.27

snSwIfLoadInterval

The time in seconds for which average port utilization should be carried out.
The value should be incremental of 30 seconds, between the ranges specified.

Integer32r/w

Constraints:
range: 30-300

.1.3.6.1.4.1.1991.1.1.3.3.5.1.28

snSwIfStatsInFrames

The total number of packets received on the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.29

snSwIfStatsOutFrames

The total number of packets transmitted out of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.30

snSwIfStatsAlignErrors

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.31

snSwIfStatsFCSErrors

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.32

snSwIfStatsMultiColliFrames

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.33

snSwIfStatsTxColliFrames

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.34

snSwIfStatsRxColliFrames

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.35

snSwIfStatsFrameTooLongs

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.36

snSwIfStatsFrameTooShorts

A count of frames received on a particular
interface that below the minimum permitted
frame size.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.37

snSwIfStatsInBcastFrames

The total number of broadcast packets received on the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.38

snSwIfStatsOutBcastFrames

The total number of broadcast packets transmitted out of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.39

snSwIfStatsInMcastFrames

The total number of multicast packets received on the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.40

snSwIfStatsOutMcastFrames

The total number of multicast packets transmitted out of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.41

snSwIfStatsInDiscard

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.42

snSwIfStatsOutDiscard

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.43

snSwIfStatsMacStations

The total number of MAC Stations connected to the interface.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.5.1.44

snSwIfStatsLinkChange

The total number of link state change of the interface.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.45

snSwIfInOctets

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.5.1.46

snSwIfOutOctets

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.5.1.47

snSwIfStatsInBitsPerSec

The number of bits per second received on the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.48

snSwIfStatsOutBitsPerSec

The number of bits per second transmitted out of the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.49

snSwIfStatsInPktsPerSec

The number of packets per second received on the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.50

snSwIfStatsOutPktsPerSec

The number of packets per second transmitted out of the interface
over a 5 minutes interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.51

snSwIfStatsInUtilization

The input network utilization in hundredths of a percent
over a 5 minutes interval.

Integer32

Constraints:
range: 0-10000

.1.3.6.1.4.1.1991.1.1.3.3.5.1.52

snSwIfStatsOutUtilization

The output network utilization in hundredths of a percent
over a 5 minutes interval.

Integer32

Constraints:
range: 0-10000

.1.3.6.1.4.1.1991.1.1.3.3.5.1.53

snSwIfStatsInKiloBitsPerSec

Bit rate in kilobits per second received on the 10G and
faster interface over a 5 minutes interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.54

snSwIfStatsOutKiloBitsPerSec

Bit rate in kilobits per second transmitted out of the 10G
and faster interface over a 5 minutes interval.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.3.5.1.55

snSwIfStatsInJumboFrames

The total number of jumbo packets received on the interface.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.5.1.56

snSwIfStatsOutJumboFrames

The total number of jumbo packets transmitted out of the interface.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.5.1.57

snSwIfInfoMirrorMode

Enable/disable mirror on this port.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.1991.1.1.3.3.5.1.58

snSwIfMacLearningDisable

The status of MAC learning feature on an ethernet port.
For POS port, Get operation will return the default value and Set operation will return an error.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.59

snSwIfInfoNativeMacAddress

The port native MAC address. The native MAC address
represents the switch port.

PhysAddress

Textual Convention: PhysAddress OctetString

.1.3.6.1.4.1.1991.1.1.3.3.5.1.62

snSwIfQosMonitorDropCounterMode

Enable/disable monitoring egress drop counter on this port.
ICX7150 has a set of queue drop counters. A port can be selected to associate with these counters.
Only when the port is selected, these drop counters can be m…

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.1991.1.1.3.3.5.1.63

snSwIfLRMAdapterPresent

To display the state for Long Reach Module (LRM) adapter is presented on this port.
Some FastIron ICX devices support LRM optics on 10G fiber ports.
LRM adapter (Fluffy) is used to support LRM optics on those switch po…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.64

snSwIfStpBPDUGuardMode

The status of the spanning tree BPDU guard on an ethernet port.
The default is false state.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.65

snSwIfStpRootGuardMode

The status of the spanning tree root guard on an ethernet port.
Declare the port to be on root guard for all spanning trees.
The default is false state.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.66

snSwIfRstpAdminEdgePortMode

The status of the rapid spanning tree admin edge port on an ethernet port.
Declare the port to be an operational edge for all vlans.
The default is false state.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.67

snSwIfInfoClockMode

The port can be configured to operate in either
master or slave mode. The values are:
none(0).........no configured or no support for clock mode, like fiber ports.
master(1).......master mode
slave(2)........slave…

Enumerationr/w

Enumerated Values:

0	none
1	master
2	slave
3	auto

.1.3.6.1.4.1.1991.1.1.3.3.5.1.68

snSwIfProtectedMode

Protected port is a port-level, per-device/stack only, security feature that restricts communication with a device connected to the port.
The default is false state.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.69

snSwIfTrustDscpMode

The status of Trust DSCP on an ethernet port.
The default is false state.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.5.1.70

snSwIfVoiceVlanId

VLAN can be configurated as a voice over IP VLAN on an ethernet port.
The valid range of voice VLAN ID is 1-4095.
The value 0 means that the voice VLAN is not configurated or is not applicable

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.5.1.71

snIfOpticalMonitoringInfoTable

table

.1.3.6.1.4.1.1991.1.1.3.3.6 · 1 row entry · 4 columns

Open in standard view

This table lists the instrumented parameters of all
optical interfaces.

snIfOpticalMonitoringInfoEntry entry .1.3.6.1.4.1.1991.1.1.3.3.6.1

Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
snIfOpticalMonitoringTemperature This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whether the …	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.6.1.1`
snIfOpticalMonitoringTxPower This object holds the value of the transmitter optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.6.1.2`
snIfOpticalMonitoringRxPower This object holds the value of the receiver optical signal power for the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.6.1.3`
snIfOpticalMonitoringTxBiasCurrent Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.6.1.4`

snInterfaceLookup2Table

table

.1.3.6.1.4.1.1991.1.1.3.3.7 · 1 row entry · 2 columns

Open in standard view

snInterfaceLookup2Entry entry .1.3.6.1.4.1.1991.1.1.3.3.7.1

Indexes

snInterfaceLookup2InterfaceId

Column	Syntax	OID
snInterfaceLookup2InterfaceId	InterfaceId2 Textual Convention: InterfaceId2 `ObjectIdentifier`	`.1.3.6.1.4.1.1991.1.1.3.3.7.1.1`
snInterfaceLookup2IfIndex	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.3.7.1.2`

snIfIndexLookup2Table

table

.1.3.6.1.4.1.1991.1.1.3.3.8 · 1 row entry · 2 columns

Open in standard view

snIfIndexLookup2Entry entry .1.3.6.1.4.1.1991.1.1.3.3.8.1

Indexes

snIfIndexLookup2IfIndex

Column	Syntax	OID
snIfIndexLookup2IfIndex	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.3.8.1.1`
snIfIndexLookup2InterfaceId	InterfaceId2 Textual Convention: InterfaceId2 `ObjectIdentifier`	`.1.3.6.1.4.1.1991.1.1.3.3.8.1.2`

snIfMediaInfoTable

table

.1.3.6.1.4.1.1991.1.1.3.3.9 · 1 row entry · 5 columns

Open in standard view

This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table.

snIfMediaInfoEntry entry .1.3.6.1.4.1.1991.1.1.3.3.9.1

An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
snIfMediaType The type of the media installed in the physical port.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.1991.1.1.3.3.9.1.1`
snIfMediaVendorName The media vendor name, full name of the corporation.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.1991.1.1.3.3.9.1.2`
snIfMediaVersion The media vendor product version number.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.1991.1.1.3.3.9.1.3`
snIfMediaPartNumber The media vendor part number.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.1991.1.1.3.3.9.1.4`
snIfMediaSerialNumber The vendor serial number of the media device.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.1991.1.1.3.3.9.1.5`

snIfOpticalLaneMonitoringTable

table

.1.3.6.1.4.1.1991.1.1.3.3.10 · 1 row entry · 6 columns

Open in standard view

This table lists the instrumented parameters of all
lanes within a 100G optic of type LR4 and LR10.
LR4 has 4 lanes per optic, LR10 has 10 lanes per optic.

snIfOpticalLaneMonitoringEntry entry .1.3.6.1.4.1.1991.1.1.3.3.10.1

Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.

Indexes

IF-MIBifIndex snIfOpticalLaneMonitoringLane

Column	Syntax	OID
snIfOpticalLaneMonitoringLane The lane number of this 100G optic. LR4 has 4, and LR10 has 10 lanes.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.3.10.1.1`
snIfOpticalLaneMonitoringTemperature This object holds the value of the transmitter laser diode temperature for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius), followed by whe…	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.10.1.2`
snIfOpticalLaneMonitoringTxPower This object holds the value of the transmitter optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.10.1.3`
snIfOpticalLaneMonitoringRxPower This object holds the value of the receiver optical signal power for the lane in the interface, measured in dBm, followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.10.1.4`
snIfOpticalLaneMonitoringTxBiasCurrent Tx Bias Current. It is measured in mA, and is followed by whether this is a normal value, or high/low warning or alarm.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.10.1.5`
snIfOpticalLaneMonitoringVoltage This object holds the value of the transmitter laser diode voltage for the lane in the interface. This object indicates the health of the transmitter. The format is xxx.yyyy volts, followed by whether the…	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.3.10.1.6`

brcdIfEgressCounterInfoTable

table

.1.3.6.1.4.1.1991.1.1.3.3.11 · 1 row entry · 5 columns

Open in standard view

This table lists the information of egress counters of 
all the queues in the physical ports.

brcdIfEgressCounterInfoEntry entry .1.3.6.1.4.1.1991.1.1.3.3.11.1

An entry in the Interface Egress Counter Information table.
The ifIndices of ethernet interfaces and the queue number will
be used to index this table.

Indexes

brcdIfEgressCounterIfIndex brcdIfEgressCounterQueueId

Column Syntax OID

brcdIfEgressCounterIfIndex

The port number of egress counter in the physical port. The port/interface index (ifindex).

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.11.1.1

brcdIfEgressCounterQueueId

The queue number of egress counter in the given port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.3.11.1.2

brcdIfEgressCounterType

The queue type of the egress counter in a given port.

Enumeration

Enumerated Values:

1	other
2	unicast
3	multicast
4	total

.1.3.6.1.4.1.1991.1.1.3.3.11.1.3

brcdIfEgressCounterPkts

The egress packet counters of the queue in a given port.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.11.1.4

brcdIfEgressCounterDropPkts

The egress dropped packet counters of the queue in a given port.
ICX7150 platform has another set of queue drop counters which are displayed only
when the port is monitored using the object, snSwIfQosMonitorDropCounter…

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.1991.1.1.3.3.11.1.5

snSwIfInfoLimitTable

table

.1.3.6.1.4.1.1991.1.1.3.3.12 · 1 row entry · 6 columns

Open in standard view

Rate limiting table for different types of traffic for a port.

snSwIfInfoLimitEntry entry .1.3.6.1.4.1.1991.1.1.3.3.12.1

An entry in the snSwIfInfoLimit table indicates the
configuration on a specified port for rate limiting values.

Indexes

snSwIfInfoPortNum snSwIfInfoLimitType

Column Syntax OID

snSwIfInfoLimitType

The type of the limit, the values specified in this row
applies for, which takes on values broadcast, multicast,
unknown-unicast.

Enumeration

Enumerated Values:

1	broadcast
2	multicast
3	unknown-unicast

.1.3.6.1.4.1.1991.1.1.3.3.12.1.1

snSwIfInfoLimitPkts

Limit the number of packets to forward per second out
of the switch port. Setting a value of 0 to this object
disables the limitation check.

Unsigned32

Constraints:
range: 0-8388607

.1.3.6.1.4.1.1991.1.1.3.3.12.1.2

snSwIfInfoLimitBits

Limit the number of kilo bytes to forward per second out
of the switch port. Setting a value of 0 to this object
disables the limitation check.

KBPSUnsigned32

Constraints:
range: 0-8388607

.1.3.6.1.4.1.1991.1.1.3.3.12.1.3

snSwIfInfoLimitThreshold

The number of packets to be dropped when the rate limit is
reached before taking the specified action like shutdown port.

Unsigned32

Constraints:
range: 1-1048576

.1.3.6.1.4.1.1991.1.1.3.3.12.1.4

snSwIfInfoLimitShutdownTime

Specifies the time the port should be in down state and this
takes effect only if Threshold is configured.

secondsUnsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.1991.1.1.3.3.12.1.5

snSwIfInfoLimitLog

Enable or disable the logging of the rate limit occurances.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.3.12.1.6

snFdbTable

table

.1.3.6.1.4.1.1991.1.1.3.4.1 · 1 row entry · 8 columns

Open in standard view

This table contains snFdb information for each station
known to the system, one entry per station.

snFdbEntry entry .1.3.6.1.4.1.1991.1.1.3.4.1.1

Each entry represents the information of a static MAC station.

Indexes

snFdbStationIndex

Column Syntax OID

snFdbStationIndex

The FDB Station index to the Fdb Station Table.

Integer32

Constraints:
range: 1-256

.1.3.6.1.4.1.1991.1.1.3.4.1.1.1

snFdbStationAddr

The snFdbs physical address. The physical address
represents a MAC Station.

PhysAddressr/w

Textual Convention: PhysAddress OctetString

.1.3.6.1.4.1.1991.1.1.3.4.1.1.2

snFdbStationPort

Station slot/port number.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.4.1.1.3

snFdbVLanId

The Station VLan ID.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.1991.1.1.3.4.1.1.4

snFdbStationQos

The Stand alone stackable station Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron switch station Priority values are:
level0(0), level1(1), level2(2), level3(3),
level4(4), level5(5…

Enumerationr/w

Enumerated Values:

0	level0
1	level1
2	level2
3	level3
4	level4
5	level5
6	level6
7	level7

.1.3.6.1.4.1.1991.1.1.3.4.1.1.5

snFdbStationType

The station type values are:
notSupported -- a read value only : this product does not
support MultiLayer Switching.
host -- any MAC station.
router -- a router-typed station.

Enumerationr/w

Enumerated Values:

0	notSupported
1	host
2	router

.1.3.6.1.4.1.1991.1.1.3.4.1.1.6

snFdbRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.4.1.1.7

snFdbStationIf

Station interface index.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.4.1.1.8

snPortStpTable

table deprecated

.1.3.6.1.4.1.1991.1.1.3.5.1 · 1 row entry · 16 columns

Open in standard view

A specific snPortStpTable consists of a number of 
switch ports. This table only exists if only if
snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is
enabled for each VLAN.

snPortStpEntry entry .1.3.6.1.4.1.1991.1.1.3.5.1.1

An entry in the snPortStpTable indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snPortStpTable requires the entired
sequence of the MIB Objects in each
snPortStpEntry stored in one PD…

Indexes

snPortStpVLanId snPortStpPortNum

Column Syntax OID

snPortStpVLanId deprecated

The VLAN ID of the VLAN switch community.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1991.1.1.3.5.1.1.1

snPortStpPortNum deprecated

The port number of the Switch.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.5.1.1.2

snPortStpPortPriority deprecated

The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1991.1.1.3.5.1.1.3

snPortStpPathCost deprecated

dot1dStpPortPathCost : The contribution of this
port to the path cost of paths towards the spanning
tree root which include this port. 802.1D-1990
recommends that the default value of this parameter
be in inverse p…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1991.1.1.3.5.1.1.4

snPortStpOperState deprecated

By default, this mode is set to notActivated(0).
notActivated(0)...the Port STP entry is not activated and not in running mode.
activated(1)......the Port STP entry is activated and in running mode

Enumeration

Enumerated Values:

0	notActivated
1	activated

.1.3.6.1.4.1.1991.1.1.3.5.1.1.5

snPortStpPortEnable deprecated

The enabled/disabled status of the port.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1991.1.1.3.5.1.1.6

snPortStpPortForwardTransitions deprecated

The number of times this port has transitioned
from the Learning state to the Forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.1.1.7

snPortStpPortState deprecated

The port's current state as defined by
application of the Spanning Tree Protocol. This
state controls what action a port takes on
reception of a frame. If the bridge has detected
a port that is malfunctioning it will …

Enumeration

Enumerated Values:

1	disabled
2	blocking
3	listening
4	learning
5	forwarding
6	broken
7	preforwarding

.1.3.6.1.4.1.1991.1.1.3.5.1.1.8

snPortStpPortDesignatedCost deprecated

The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.5.1.1.9

snPortStpPortDesignatedRoot deprecated

The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.1991.1.1.3.5.1.1.10

snPortStpPortDesignatedBridge deprecated

The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.1991.1.1.3.5.1.1.11

snPortStpPortDesignatedPort deprecated

The Port Identifier of the port on the Designated
Bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.1991.1.1.3.5.1.1.12

snPortStpPortAdminRstp deprecated

Enable or disable RSTP of a port which is a member of a VLAN.
If the VLAN is not operating in RSTP, this object will return
FALSE(2) and this object is not writable.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.1.1.13

snPortStpPortProtocolMigration deprecated

When operating in RSTP (version 2) mode, writing TRUE(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns FALSE(2) when read.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.1.1.14

snPortStpPortAdminEdgePort deprecated

The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this port should be assumed as a non-edge-port.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.1.1.15

snPortStpPortAdminPointToPoint deprecated

The administrative point-to-point status of the LAN segment
attached to this port. A value of TRUE(1) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of FALSE(…

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.1.1.16

snIfStpTable

table

.1.3.6.1.4.1.1991.1.1.3.5.2 · 1 row entry · 22 columns

Open in standard view

A specific snIfStpTable consists of a number of 
switch ports. This table only exists if only if
snVLanByPortCfgTable exists and snVLanByPortCfgStpMode is
enabled for each VLAN.

snIfStpEntry entry .1.3.6.1.4.1.1991.1.1.3.5.2.1

An entry in the snIfStpTable indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snIfStpTable requires the entired
sequence of the MIB Objects in each
snIfStpEntry stored in one PDU. Ot…

Indexes

snIfStpVLanId snIfStpPortNum

Column Syntax OID

snIfStpVLanId

The VLAN ID of the VLAN switch community.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1991.1.1.3.5.2.1.1

snIfStpPortNum

The port number of the Switch. It has the ifIndex value.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.5.2.1.2

snIfStpPortPriority

The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
dot1dStpPort.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.1991.1.1.3.5.2.1.3

snIfStpCfgPathCost

Integer32r/w

Constraints:
range: 0-200000000

.1.3.6.1.4.1.1991.1.1.3.5.2.1.4

snIfStpOperState

By default, this mode is set to notActivated(0).
notActivated(0)...the Port STP or RSTP entry is not configured and not in running mode.
activated(1)......the Port STP or RSTP entry is enabled

Enumeration

Enumerated Values:

0	notActivated
1	activated

.1.3.6.1.4.1.1991.1.1.3.5.2.1.5

snIfStpPortState

Enumeration

Enumerated Values:

1	disabled
2	blocking
3	listening
4	learning
5	forwarding
6	broken
7	preforwarding

.1.3.6.1.4.1.1991.1.1.3.5.2.1.8

snIfStpPortDesignatedCost

The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.5.2.1.9

snIfStpPortDesignatedRoot

The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the
segment to which the port is attached.

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.1991.1.1.3.5.2.1.10

snIfStpPortDesignatedBridge

The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.

BridgeId

Textual Convention: BridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.1991.1.1.3.5.2.1.11

snIfStpPortDesignatedPort

The Port Identifier of the port on the Designated
Bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.1991.1.1.3.5.2.1.12

snIfStpPortAdminRstp

Enable or disable RSTP of a port which is a member of a VLAN.
If the VLAN is not operating in RSTP, this object will return
FALSE(2) and this object is not writable.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.2.1.13

snIfStpPortProtocolMigration

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.2.1.14

snIfStpPortAdminEdgePort

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.2.1.15

snIfStpPortAdminPointToPoint

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.1991.1.1.3.5.2.1.16

snIfStpOperPathCost

Integer32

Constraints:
range: 0-200000000

.1.3.6.1.4.1.1991.1.1.3.5.2.1.17

snIfStpPortRole

STP/RSTP port role.

Enumeration

Enumerated Values:

0	unknown
1	alternate
2	root
3	designated
4	backupRole
5	disabledRole

.1.3.6.1.4.1.1991.1.1.3.5.2.1.18

snIfStpBPDUTransmitted

STP/RSTP bridge protocol unit transmitted counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.2.1.19

snIfStpBPDUReceived

STP/RSTP bridge protocol unit received counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.2.1.20

snIfRstpConfigBPDUReceived

RSTP configuration bridge protocol unit received counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.2.1.21

snIfRstpTCNBPDUReceived

RSTP topology change notification bridge protocol unit received counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.2.1.22

snIfRstpConfigBPDUTransmitted

RSTP configuration bridge protocol unit transmitted counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.2.1.23

snIfRstpTCNBPDUTransmitted

RSTP topology change notification bridge protocol unit transmitted counter.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.5.2.1.24

snTrunkTable

table

.1.3.6.1.4.1.1991.1.1.3.6.1 · 1 row entry · 3 columns

Open in standard view

A specific snTrunkTable consists of a number of 
Trunk port-mask.

snTrunkEntry entry .1.3.6.1.4.1.1991.1.1.3.6.1.1

An entry in the snTrunkTable indicates the
configuration on a specified Trunk port membership.

Indexes

snTrunkIndex

Column Syntax OID

snTrunkIndex

The number of the trunk entries can be configured.
This can be 32*<slots> for Jetcore, and 16*<slots> for Ironcore.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.6.1.1.1

snTrunkPortMask

Trunk membership of the Switch.

PortMaskr/w

Textual Convention: PortMask Integer32

.1.3.6.1.4.1.1991.1.1.3.6.1.1.2

snTrunkType

The trunk connection type which specifies what
device the trunk ports are connected to.

Enumerationr/w

Enumerated Values:

1	switch
2	server

.1.3.6.1.4.1.1991.1.1.3.6.1.1.3

snMSTrunkTable

table

.1.3.6.1.4.1.1991.1.1.3.6.2 · 1 row entry · 4 columns

Open in standard view

A table contains the configuration of port members of
multi-slot trunk groups.

snMSTrunkEntry entry .1.3.6.1.4.1.1991.1.1.3.6.2.1

An entry of the snMSTrunkTable.

Indexes

snMSTrunkPortIndex

Column Syntax OID

snMSTrunkPortIndex

The primary port of a trunk group. For module with Gig ports,
primary port is port 1, 3, 5, 7. For module with 10/100 ports,
primary port is port 1, 5, 9, 13, 17, 21.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.6.2.1.1

snMSTrunkPortList

A list of port indices which are the port membership
of a trunk group. Each port index is a 16-bit integer
in big endian order. The first port index must be the
primary port index.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.6.2.1.2

snMSTrunkType

The trunk connection type which specifies what
device the trunk ports are connected to.

Enumerationr/w

Enumerated Values:

1	switch
2	server

.1.3.6.1.4.1.1991.1.1.3.6.2.1.3

snMSTrunkRowStatus

To create or delete a table entry.

Enumerationr/w

Enumerated Values:

1	invalid
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.6.2.1.4

snMSTrunkIfTable

table

.1.3.6.1.4.1.1991.1.1.3.6.3 · 1 row entry · 4 columns

Open in standard view

A table contains the configuration of port members of
multi-slot trunk groups.

snMSTrunkIfEntry entry .1.3.6.1.4.1.1991.1.1.3.6.3.1

An entry of the snMSTrunkIfTable.

Indexes

snMSTrunkIfIndex

Column Syntax OID

snMSTrunkIfIndex

The primary port(IfIndex) of a trunk group. For module with Gig ports,
primary port is port 1, 3, 5, 7. For module with 10/100 ports,
primary port is port 1, 5, 9, 13, 17, 21.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.6.3.1.1

snMSTrunkIfList

A list of interface indices which are the port membership
of a trunk group. Each interface index is a 16-bit integer
in big endian order. The first interface/port index must be
the primary port(ifIndex) index.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.6.3.1.2

snMSTrunkIfType

The trunk connection type which specifies what
device the trunk ports are connected to.

Enumerationr/w

Enumerated Values:

1	switch
2	server

.1.3.6.1.4.1.1991.1.1.3.6.3.1.3

snMSTrunkIfRowStatus

To create or delete a table entry.

Enumerationr/w

Enumerated Values:

1	invalid
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.6.3.1.4

snDhcpGatewayListTable

table

.1.3.6.1.4.1.1991.1.1.3.8.1 · 1 row entry · 3 columns

Open in standard view

A table of DHCP gateway list of addresses.

snDhcpGatewayListEntry entry .1.3.6.1.4.1.1991.1.1.3.8.1.1

An entry in the IP Port Address table.

Indexes

snDhcpGatewayListId

Column Syntax OID

snDhcpGatewayListId

The ID for a DHCP gateway list entry.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.1991.1.1.3.8.1.1.1

snDhcpGatewayListAddrList

The DHCP gateway address list for each DHCP gateway list ID.
This list contains 1 to 8 IP addresses represented by octet string.

OctetStringr/w

Constraints:
range: 4-32

.1.3.6.1.4.1.1991.1.1.3.8.1.1.2

snDhcpGatewayListRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.8.1.1.3

snMacFilterTable

table

.1.3.6.1.4.1.1991.1.1.3.10.1 · 1 row entry · 10 columns

Open in standard view

MAC filter table.

snMacFilterEntry entry .1.3.6.1.4.1.1991.1.1.3.10.1.1

An entry in the MAC filter table.

Indexes

snMacFilterIndex

Column Syntax OID

snMacFilterIndex

The table index for a filter entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.10.1.1.1

snMacFilterAction

Action to take if the Mac packet match
with this filter.

Enumerationr/w

Enumerated Values:

0	deny
1	permit

.1.3.6.1.4.1.1991.1.1.3.10.1.1.2

snMacFilterSourceMac

Source MAC address.

FOUNDRY-SN-AGENT-MIBMacAddressr/w

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.10.1.1.3

snMacFilterSourceMask

Source MAC subnet mask.

FOUNDRY-SN-AGENT-MIBMacAddressr/w

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.10.1.1.4

snMacFilterDestMac

Destination MAC address.

FOUNDRY-SN-AGENT-MIBMacAddressr/w

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.10.1.1.5

snMacFilterDestMask

Destination MAC subnet mask.

FOUNDRY-SN-AGENT-MIBMacAddressr/w

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.10.1.1.6

snMacFilterOperator

Type of comparison to perform.

Enumerationr/w

Enumerated Values:

0	equal
1	notEqual
2	less
3	greater

.1.3.6.1.4.1.1991.1.1.3.10.1.1.7

snMacFilterFrameType

Frame Type: ethernet-type, LLC and SNAP types

Enumerationr/w

Enumerated Values:

0	notUsed
1	ethernet
2	llc
3	snap

.1.3.6.1.4.1.1991.1.1.3.10.1.1.8

snMacFilterFrameTypeNum

Frame Type Number. 0 means NA

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1991.1.1.3.10.1.1.9

snMacFilterRowStatus

Enumerationr/w

Enumerated Values:

1	invalid
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.10.1.1.10

snMacFilterPortAccessTable

table deprecated

.1.3.6.1.4.1.1991.1.1.3.10.2 · 1 row entry · 3 columns

Open in standard view

MAC Filter port access table.

snMacFilterPortAccessEntry entry .1.3.6.1.4.1.1991.1.1.3.10.2.1

An entry in the MAC Filter Port access table.

Indexes

snMacFilterPortAccessPortIndex

Column Syntax OID

snMacFilterPortAccessPortIndex deprecated

The port index.
For FastIron/NetIron products, port index value is from 1 to 42
For BigIron products, port index is an encoded number:
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number.
For virtual route…

Integer32

Constraints:
range: 1-3900

.1.3.6.1.4.1.1991.1.1.3.10.2.1.1

snMacFilterPortAccessFilters deprecated

1st octet correspond to 1st filter
number and so on.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.10.2.1.2

snMacFilterPortAccessRowStatus deprecated

Enumerationr/w

Enumerated Values:

1	invalid
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.10.2.1.3

snMacFilterIfAccessTable

table

.1.3.6.1.4.1.1991.1.1.3.10.3 · 1 row entry · 3 columns

Open in standard view

MAC Filter port access table.

snMacFilterIfAccessEntry entry .1.3.6.1.4.1.1991.1.1.3.10.3.1

An entry in the MAC Filter Port access table.

Indexes

snMacFilterIfAccessPortIndex

Column Syntax OID

snMacFilterIfAccessPortIndex

The port/interface index.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.10.3.1.1

snMacFilterIfAccessFilters

1st octet correspond to 1st filter number and so on.

OctetStringr/w

.1.3.6.1.4.1.1991.1.1.3.10.3.1.2

snMacFilterIfAccessRowStatus

Enumerationr/w

Enumerated Values:

1	invalid
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.10.3.1.3

snNTPServerTable

table

.1.3.6.1.4.1.1991.1.1.3.11.2 · 1 row entry · 3 columns

Open in standard view

NTP (Network Time Protocol) server table.

snNTPServerEntry entry .1.3.6.1.4.1.1991.1.1.3.11.2.1

An entry in the NTP server table.

Indexes

snNTPServerIp

Column Syntax OID

snNTPServerIp

NTP server IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.11.2.1.1

snNTPServerVersion

NTP server version.

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.1991.1.1.3.11.2.1.2

snNTPServerRowStatus

To create or delete a NTP server table entry.

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.11.2.1.3

snRadiusServerTable

table

.1.3.6.1.4.1.1991.1.1.3.12.2 · 1 row entry · 6 columns

Open in standard view

Radius server table.

snRadiusServerEntry entry .1.3.6.1.4.1.1991.1.1.3.12.2.1

An entry in the Radius server table.

Indexes

snRadiusServerIp

Column Syntax OID

snRadiusServerIp

Radius server IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.12.2.1.1

snRadiusServerAuthPort

Authentication UDP port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.12.2.1.2

snRadiusServerAcctPort

Account UDP port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.12.2.1.3

snRadiusServerRowStatus

To create or delete a Radius server table entry.

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.12.2.1.4

snRadiusServerRowKey

Authentication key displayed as encrypted text.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.12.2.1.5

snRadiusServerUsage

To allow this server to be dedicated for a particular AAA activity.

Enumerationr/w

Enumerated Values:

1	default
2	authenticationOnly
3	authorizationOnly
4	accountingOnly

.1.3.6.1.4.1.1991.1.1.3.12.2.1.6

snTacacsServerTable

table

.1.3.6.1.4.1.1991.1.1.3.13.2 · 1 row entry · 5 columns

Open in standard view

Tacacs server table.

snTacacsServerEntry entry .1.3.6.1.4.1.1991.1.1.3.13.2.1

An entry in the Tacacs server table.

Indexes

snTacacsServerIp

Column Syntax OID

snTacacsServerIp

Tacacs server IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.13.2.1.1

snTacacsServerAuthPort

Authentication UDP port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.13.2.1.2

snTacacsServerRowStatus

To create or delete a Tacacs server table entry.

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.13.2.1.3

snTacacsServerRowKey

Authentication key displayed as encrypted text.
Write operation can only be done if the SET request uses
SNMPv3 with data encrypted using privacy key.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.1991.1.1.3.13.2.1.4

snTacacsServerUsage

To allow this server to be dedicated for a particular AAA activity.

Enumerationr/w

Enumerated Values:

1	default
2	authenticationOnly
3	authorizationOnly
4	accountingOnly

.1.3.6.1.4.1.1991.1.1.3.13.2.1.5

snQosProfileTable

table

.1.3.6.1.4.1.1991.1.1.3.14.1 · 1 row entry · 4 columns

Open in standard view

A table contains the configuration of qos profile 
groups.

snQosProfileEntry entry .1.3.6.1.4.1.1991.1.1.3.14.1.1

An entry of the snQosProfileTable.

Indexes

snQosProfileIndex

Column	Syntax	OID
snQosProfileIndex The table index of QOS Profile.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.1991.1.1.3.14.1.1.1`
snQosProfileName Qos Profile Name string.	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.1991.1.1.3.14.1.1.2`
snQosProfileRequestedBandwidth Qos Profile Requested Bandwidth.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.1991.1.1.3.14.1.1.3`
snQosProfileCalculatedBandwidth Qos Profile Calculated Bandwidth.	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.1991.1.1.3.14.1.1.4`

snQosBindTable

table

.1.3.6.1.4.1.1991.1.1.3.14.2 · 1 row entry · 3 columns

Open in standard view

A table contains the configuration of 802.1p to qos profile 
binding groups.

snQosBindEntry entry .1.3.6.1.4.1.1991.1.1.3.14.2.1

An entry of the snQosBindTable.

Indexes

snQosBindIndex

Column	Syntax	OID
snQosBindIndex The table index of QOS Bind.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.1991.1.1.3.14.2.1.1`
snQosBindPriority QOS bind priority.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.14.2.1.2`
snQosBindProfileIndex QOS Bind Profile Index. This is pointer to the index of snQosProfile Table.	Integer32r/w Constraints: `range: 1-8`	`.1.3.6.1.4.1.1991.1.1.3.14.2.1.3`

snDosAttackPortTable

table

.1.3.6.1.4.1.1991.1.1.3.14.3.2 · 1 row entry · 5 columns

Open in standard view

Denial of service attack port table.

snDosAttackPortEntry entry .1.3.6.1.4.1.1991.1.1.3.14.3.2.1

An entry of the denial of service attack port table.

Indexes

snDosAttackPort

Column	Syntax	OID
snDosAttackPort ifIndex value of a port.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.1`
snDosAttackPortICMPDropCount ICMP drop counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.2`
snDosAttackPortICMPBlockCount ICMP block counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.3`
snDosAttackPortSYNDropCount SYN drop counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.4`
snDosAttackPortSYNBlockCount SYN block counter.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.14.3.2.1.5`

snNetFlowCollectorTable

table

.1.3.6.1.4.1.1991.1.1.3.18.2 · 1 row entry · 5 columns

Open in standard view

A table of each NetFlow collector information.

snNetFlowCollectorEntry entry .1.3.6.1.4.1.1991.1.1.3.18.2.1

A row in the NetFlow collector table.

Indexes

snNetFlowCollectorIndex

Column Syntax OID

snNetFlowCollectorIndex

The index to the NetFlow collector table.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.1991.1.1.3.18.2.1.1

snNetFlowCollectorIp

The NetFlow collector ip address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.18.2.1.2

snNetFlowCollectorUdpPort

The NetFlow collector UDP port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.2.1.3

snNetFlowCollectorSourceInterface

The ifIndex value to specify source port to
export NetFlow packet. Value 0 to indicate
default outgoing port.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.2.1.4

snNetFlowCollectorRowStatus

To create or delete a NetFlow collector table entry.

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.18.2.1.5

snNetFlowAggregationTable

table

.1.3.6.1.4.1.1991.1.1.3.18.3 · 1 row entry · 9 columns

Open in standard view

A table of each NetFlow aggregation scheme information.

snNetFlowAggregationEntry entry .1.3.6.1.4.1.1991.1.1.3.18.3.1

A row in the NetFlow Aggregation table.

Indexes

snNetFlowAggregationIndex

Column Syntax OID

snNetFlowAggregationIndex

The Aggregation scheme ID

Enumeration

Enumerated Values:

1	as
2	protocolPort
3	destPrefix
4	sourcePrefix
5	prefix

.1.3.6.1.4.1.1991.1.1.3.18.3.1.1

snNetFlowAggregationIp

The NetFlow aggregation collector ip address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.18.3.1.2

snNetFlowAggregationUdpPort

The NetFlow aggregation collector UDP port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.3.1.3

snNetFlowAggregationSourceInterface

The ifIndex value to specify source port to
export NetFlow aggregation packet.
Value 0 to indicate default outgoing port.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.3.1.4

snNetFlowAggregationNumberOfCacheEntries

Number of cache entries for aggregation scheme

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.3.1.5

snNetFlowAggregationActiveTimeout

Maximum time an active flow can be in
the aggregation cache

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.3.1.6

snNetFlowAggregationInactiveTimeout

Maximum time an inactive flow can be in
the aggregation cache

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.3.1.7

snNetFlowAggregationEnable

Enable/disable NetFlow aggregation
for this aggregation scheme.

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.18.3.1.8

snNetFlowAggregationRowStatus

To create or delete a NetFlow collector table entry.

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.18.3.1.9

snNetFlowIfTable

table

.1.3.6.1.4.1.1991.1.1.3.18.4 · 1 row entry · 2 columns

Open in standard view

A list of interface entries.  The number of entries
is given by the value of ifNumber.

snNetFlowIfEntry entry .1.3.6.1.4.1.1991.1.1.3.18.4.1

Entry containing the type of switching performed
on that interface.

Indexes

snNetFlowIfIndex

Column Syntax OID

snNetFlowIfIndex

A unique value, greater than zero, for each
interface. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain constant at least from
one re-initiali…

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.18.4.1.1

snNetFlowIfFlowSwitching

To enable/disable flow switching in a particular
interface:
disable (0) - no flow switching
enable (1) - flow switching

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.1991.1.1.3.18.4.1.2

snSflowCollectorTable

table

.1.3.6.1.4.1.1991.1.1.3.19.2 · 1 row entry · 4 columns

Open in standard view

Table of all but first sFlow collectors. The first collector can be configured
using sFlowTable in RFC 3176. The RFC cannot be used to configure more
than one sFlow collectors. This table has been created to fill this gap.

snSflowCollectorEntry entry .1.3.6.1.4.1.1991.1.1.3.19.2.1

A row in the sFlow collector table.

Indexes

snSflowCollectorIndex

Column Syntax OID

snSflowCollectorIndex

The index to the sFlow collector table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.19.2.1.1

snSflowCollectorIP

The sFlow collector ip address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.1991.1.1.3.19.2.1.2

snSflowCollectorUDPPort

The sFlow collector UDP port number.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.19.2.1.3

snSflowCollectorRowStatus

To create, update or delete a SFlow collector table entry.
If the row exists, then a SET with
value of create(4) returns error
'badValue'. Deleted rows go away
immediately. The following values
can be returned on reads:…

Enumerationr/w

Enumerated Values:

0	noSuch
1	other
2	valid
3	delete
4	create
5	modify

.1.3.6.1.4.1.1991.1.1.3.19.2.1.4

snFdpInterfaceTable

table

.1.3.6.1.4.1.1991.1.1.3.20.1.1.1 · 1 row entry · 3 columns

Open in standard view

Status of FDP on the device's interfaces.

snFdpInterfaceEntry entry .1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1

An entry in the snFdpInterfaceTable,
having the status of FDP on an interface.

Indexes

snFdpInterfaceIfIndex

Column Syntax OID

snFdpInterfaceIfIndex

ifIndex value of the local interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.1

snFdpInterfaceFdpEnable

The flag, whether the Ruckus Wireless Discovery Protocol
is currently running on this interface. It has no
effect when FDP is disabled (snFdpGlobalRun = FALSE).

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.2

snFdpInterfaceCdpEnable

The flag, whether the Cisco Discovery Protocol
is currently running on this interface. It has no
effect when CDP is disabled (snCdpGlobalRun = FALSE).

Enumerationr/w

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.1991.1.1.3.20.1.1.1.1.3

snFdpCacheTable

table

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1 · 1 row entry · 15 columns

Open in standard view

The table for the cached information obtained
via receiving FDP/CDP messages.

snFdpCacheEntry entry .1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1

An entry in the snFdpCacheTable, having the information
received via FDP/CDP on one interface from one device.
Entries appear when a FDP/CDP advertisement is received
from a neighbor device.
Entries disappear when FD…

Indexes

snFdpCacheIfIndex snFdpCacheDeviceIndex

Column Syntax OID

snFdpCacheIfIndex

ifIndex value of the local interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.1

snFdpCacheDeviceIndex

Identification of a device, which sent FDP/CDP messages

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.2

snFdpCacheDeviceId

The Device-ID string as reported in the most recent FDP/CDP
message. The zero-length string indicates no Device-ID
field (TLV) was reported in the most recent FDP/CDP
message.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.3

snFdpCacheAddressType

An indication of the type of address contained in the
corresponding instance of snFdpCacheAddress.

Enumeration

Enumerated Values:

1	ip
2	ipx
3	appletalk

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.4

snFdpCacheAddress

The (first) network-layer address of the device
as reported in the most recent FDP/CDP message
in the following format:
IP address: 4 octets, ip(1)
IPX address: 10 octets, ipx(2)
First 4-octet as the network num…

OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.5

snFdpCacheVersion

Version string as reported in the most recent FDP/CDP message.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.6

snFdpCacheDevicePort

The Port-ID string as reported in the most recent FDP/CDP
message. This will typically be the value of the ifName
object (e.g., Ethernet0). The zero-length string
indicates no Port-ID field (TLV) was reported in the
m…

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.7

snFdpCachePlatform

The Device's Hardware Platform as reported in the most
recent FDP/CDP message. The zero-length string indicates
that no Platform field (TLV) was reported in the most
recent FDP/CDP message.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.8

snFdpCacheCapabilities

The Device's Functional Capabilities as reported in the
most recent FDP/CDP message.

FOUNDRY-SN-AGENT-MIBDisplayString

Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.9

snFdpCacheVendorId

Indicates the entry received by either FDP or CDP.

Enumeration

Enumerated Values:

1	fdp
2	cdp

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.10

snFdpCacheIsAggregateVlan

Neighbor device is in aggregated-vlan.

Enumeration

Enumerated Values:

0	false
1	true

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.11

snFdpCacheTagType

Neighbor device tag-type.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.12

snFdpCachePortVlanMask

Neighbor device port VLAN masks in 512-byte octet string.

OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.13

snFdpCachePortTagMode

Neighbor device port tag mode. Dual(3) mode not supported from
FI 08.0.80 release. This object will return 0 for dual(3) Mode.

Enumeration

Enumerated Values:

1	untagged
2	tagged
3	dual

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.14

snFdpCacheDefaultTrafficeVlanIdForDualMode deprecated

This object return 0 due to no support for this object from FI 08.0.80 release.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.2.1.1.15

snFdpCachedAddressTable

table

.1.3.6.1.4.1.1991.1.1.3.20.1.4.1 · 1 row entry · 5 columns

Open in standard view

Cached address table from receiving FDP/CDP messages.

snFdpCachedAddressEntry entry .1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1

An entry (conceptual row) in the snFdpCacheAddressTable,
containing one cached address from FDP/CDP messages.

Indexes

snFdpCachedAddrIfIndex snFdpCachedAddrDeviceIndex snFdpCachedAddrDeviceAddrEntryIndex

Column Syntax OID

snFdpCachedAddrIfIndex

The ifIndex value of the local interface.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.1

snFdpCachedAddrDeviceIndex

A unique vlaue for each device from which FDP/CDP messages
are being received.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.2

snFdpCachedAddrDeviceAddrEntryIndex

A unique vlaue for address entry in device from which FDP/CDP messages
are being received.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.3

snFdpCachedAddrType

An indication of the type of address contained in the
corresponding instance of snFdpCacheAddrValue.

Enumeration

Enumerated Values:

1	ip
2	ipx
3	appletalk

.1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.4

snFdpCachedAddrValue

The network-layer address of the device
SNMP-agent as reported in the most recent FDP/CDP message
in the following format:
IP address: 4 octets, ip(1)
IPX address: 10 octets, ipx(2)
First 4-octet as the network …

OctetString

.1.3.6.1.4.1.1991.1.1.3.20.1.4.1.1.5

snPortMacSecurityTable

table

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1 · 1 row entry · 8 columns

Open in standard view

Status of port MAC security on the device's interfaces.

snPortMacSecurityEntry entry .1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1

An entry in the snPortMacSecurityTable

Indexes

snPortMacSecurityIfIndex snPortMacSecurityResource snPortMacSecurityQueryIndex

Column Syntax OID

snPortMacSecurityIfIndex

ifIndex value of the local Ethernet interface on
which MAC security is configured.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.1

snPortMacSecurityResource

The MAC address was secured using local or shared resources.

Enumeration

Enumerated Values:

1	local
2	shared

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.2

snPortMacSecurityQueryIndex

Entry index within the given resource of local Ethernet interface on
which MAC security is configured.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.3

snPortMacSecurityMAC

The secure MAC address for this interface.

FOUNDRY-SN-AGENT-MIBMacAddress

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.4

snPortMacSecurityAgeLeft

The number of minutes the MAC address will remain secure
before being aged out. 0 means no aging.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.5

snPortMacSecurityShutdownStatus

Interface up/down status.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.6

snPortMacSecurityShutdownTimeLeft

If snPortMacSecurityShutdownStatus is up(1), this value will be 0.
If snPortMacSecurityShutdownStatus is down(2), this gives
the number of seconds before this interface is enabled again.
In the later case, 0 means inter…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.7

snPortMacSecurityVlanId

The vlan membership of this interface.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1991.1.1.3.24.1.1.1.1.8

snPortMacSecurityModuleStatTable

table

.1.3.6.1.4.1.1991.1.1.3.24.1.1.2 · 1 row entry · 5 columns

Open in standard view

Port MAC security statistics on each module.

snPortMacSecurityModuleStatEntry entry .1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1

An entry in the snPortMacSecurityModuleStatTable

Indexes

snPortMacSecurityModuleStatSlotNum

Column	Syntax	OID
snPortMacSecurityModuleStatSlotNum The slot number of the port security device module.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.1`
snPortMacSecurityModuleStatTotalSecurityPorts The totol number of Ethernet interfaces on which MAC security is configured in this module.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.2`
snPortMacSecurityModuleStatTotalMACs The totol number of port MAC security MAC addresses are learned or configured in this module.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.3`
snPortMacSecurityModuleStatViolationCounts The totol number of counts of violation are collected in this module.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.4`
snPortMacSecurityModuleStatTotalShutdownPorts The totol number of Ethernet interfaces are shutted down due to security violation in this module.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1991.1.1.3.24.1.1.2.1.5`

snPortMacSecurityIntfContentTable

table

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3 · 1 row entry · 9 columns

Open in standard view

Port MAC security statistics on each Ethernet Interface.

snPortMacSecurityIntfContentEntry entry .1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1

An entry in the snPortMacSecurityIntfContentTable

Indexes

snPortMacSecurityIntfContentIfIndex

Column Syntax OID

snPortMacSecurityIntfContentIfIndex

In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 2863.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.1

snPortMacSecurityIntfContentSecurity

Port security for this interface can be either disabled or enabled.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.2

snPortMacSecurityIntfContentViolationType

Port security violation type for this interface is shutdown or restrict.

Enumerationr/w

Enumerated Values:

0	shutdown
1	restrict
2	notSupported

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.3

snPortMacSecurityIntfContentShutdownTime

If snPortMacSecurityIntfContentViolationType is shutdown(1),
this value gives the number of seconds this interface is shut down when violation occurs.
In the shutdown(1) case, 0 means interface is permanently down.
If s…

Unsigned32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.4

snPortMacSecurityIntfContentShutdownTimeLeft

If snPortMacSecurityIntfContentViolationType is shutdown(1),
whether this interface has been shut down due to a security violation
and the value gives the number of seconds before this interface is enabled again.
If s…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.5

snPortMacSecurityIntfContentAgeOutTime

The amount of time, in minutes, MAC addresses learned on this interface will remain secure.
It allows configurable values 0-1440. 0 means no aging permanently.

Unsigned32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.6

snPortMacSecurityIntfContentMaxLockedMacAllowed

Maximum number of security MAC addresses can be locked to this interface.

SNMPv2-SMIUnsigned32r/w

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.7

snPortMacSecurityIntfContentTotalMACs

The totol number of port MAC security MAC addresses are locked in this interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.8

snPortMacSecurityIntfContentViolationCounts

The totol number of counts of violation are collected in this interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.3.1.9

snPortMacSecurityIntfMacTable

table

.1.3.6.1.4.1.1991.1.1.3.24.1.1.4 · 1 row entry · 4 columns

Open in standard view

Status of port MAC security on the device's interfaces.

snPortMacSecurityIntfMacEntry entry .1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1

An entry in the snPortMacSecurityIntfMacTable

Indexes

snPortMacSecurityIntfMacIfIndex snPortMacSecurityIntfMacAddress

Column Syntax OID

snPortMacSecurityIntfMacIfIndex

ifIndex value of the local Ethernet interface on
which MAC security is configured.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.1

snPortMacSecurityIntfMacAddress

The secure MAC address for this local Ethernet interface on
which the secure MAC Address is configured and/or learned.
The maximum number of the secure MAC Addresses is restricted
by the snPortMacSecurityIntfContent…

FOUNDRY-SN-AGENT-MIBMacAddress

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.2

snPortMacSecurityIntfMacVlanId

The vlan membership of this interface, zero means don't care.

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.3

snPortMacSecurityIntfMacRowStatus

Enumerationr/w

Enumerated Values:

1	other
2	valid
3	delete
4	create

.1.3.6.1.4.1.1991.1.1.3.24.1.1.4.1.4

snPortMacSecurityAutosaveMacTable

table

.1.3.6.1.4.1.1991.1.1.3.24.1.1.5 · 1 row entry · 4 columns

Open in standard view

Autosave MAC addresses of port MAC security on the device's interfaces.

snPortMacSecurityAutosaveMacEntry entry .1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1

An entry in the snPortMacSecurityAutosaveMacTable

Indexes

snPortMacSecurityAutosaveMacIfIndex snPortMacSecurityAutosaveMacResource snPortMacSecurityAutosaveMacQueryIndex

Column Syntax OID

snPortMacSecurityAutosaveMacIfIndex

ifIndex value of the local Ethernet interface on
which MAC security is configured.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.1

snPortMacSecurityAutosaveMacResource

The MAC address was autosaved using local or shared resources.

Enumeration

Enumerated Values:

1	local
2	shared

.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.2

snPortMacSecurityAutosaveMacQueryIndex

Entry index within the given resource of local Ethernet interface on
which MAC security is autosaved.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.3

snPortMacSecurityAutosaveMacAddress

The secure MAC address for this local Ethernet interface on
which the secure MAC Address is autosaved.

FOUNDRY-SN-AGENT-MIBMacAddress

Textual Convention: FOUNDRY-SN-AGENT-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.1991.1.1.3.24.1.1.5.1.4

snPortMonitorTable

table

.1.3.6.1.4.1.1991.1.1.3.25.1 · 1 row entry · 2 columns

Open in standard view

Status of port monitoring on the device's interfaces.

snPortMonitorEntry entry .1.3.6.1.4.1.1991.1.1.3.25.1.1

An entry in the snPortMonitorTable

Indexes

snPortMonitorIfIndex

Column	Syntax	OID
snPortMonitorIfIndex ifIndex value of the local interface on which monitoring is configuerd.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.1991.1.1.3.25.1.1.1`
snPortMonitorMirrorList Lists the monitoring configuration of this port. The value is a space delimited sequence of ifIndex of mirror port and monitor mode. The values for mode can be - 0 - off, 1 - input, 2 - output, 3 - both Eg. '65 2 66 1'…	FOUNDRY-SN-AGENT-MIBDisplayStringr/w Textual Convention: FOUNDRY-SN-AGENT-MIBDisplayString `OctetString`	`.1.3.6.1.4.1.1991.1.1.3.25.1.1.2`