snVLanByPortCfgStpForwardDelay

FOUNDRY-SN-SWITCH-GROUP-MIB · .1.3.6.1.4.1.1991.1.1.3.2.7.1.14
MIB view Table view

Object

column Timeout 
dot1dStpForwardDelay: From RFC1493(Bridge MIB).
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state.  The value determines how long the port
stays in each of the Listening and Learning
states, which precede the Forwarding state.  This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the Forwarding Database.  [Note that
this value is the one that this bridge is
currently using, in contrast to
dot1dStpBridgeForwardDelay which is the value that
this bridge and all others would start using
if/when this bridge were to become the root.]

Context

MIB
FOUNDRY-SN-SWITCH-GROUP-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.2.7.1.14
Type
column
Access
readonly
Status
current
Parent
snVLanByPortCfgEntry
Table
snVLanByPortCfgTable
Siblings
26

Syntax

Timeout
Source
Timeout
Base type
Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snVLanByPortCfgVLanId
The VLAN identifier (VLAN ID).
columnInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.1
snVLanByPortCfgStpProtocolSpecification
An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementat…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.2.7.1.10
snVLanByPortCfgStpMaxAge
dot1dStpMaxAge: From RFC1493(Bridge MIB). The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths…
columnTimeout.1.3.6.1.4.1.1991.1.1.3.2.7.1.11
snVLanByPortCfgStpHelloTime
dot1dStpHelloTime: From RFC1493(Bridge MIB). The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning …
columnTimeout.1.3.6.1.4.1.1991.1.1.3.2.7.1.12
snVLanByPortCfgStpHoldTime
dot1dStpHoldTime: From RFC1493(Bridge MIB). This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this nod…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.13
snVLanByPortCfgStpTimeSinceTopologyChange
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.1991.1.1.3.2.7.1.15
snVLanByPortCfgStpTopChanges
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.2.7.1.16
snVLanByPortCfgStpRootCost
dot1dStpRootCost: From RFC1493(Bridge MIB). The cost of the path to the root as seen from this bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.17
snVLanByPortCfgStpRootPort
dot1dStpRootPort: From RFC1493(Bridge MIB). The port number of the port which offers the lowest cost path from this bridge to the root bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.18
snVLanByPortCfgStpDesignatedRoot
dot1dStpDesignatedRoot: From RFC1493(Bridge MIB). The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi…
columnBridgeId.1.3.6.1.4.1.1991.1.1.3.2.7.1.19
snVLanByPortCfgQos
The Stand alone stackable switch VLAN Priority values are: level0(0) -- low prority level1(1) -- high prority. The BigIron switch VLAN Priority values are: level0(0), level1(1),…
columnPortQosTC.1.3.6.1.4.1.1991.1.1.3.2.7.1.2
snVLanByPortCfgBaseBridgeAddress
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong…
columnFOUNDRY-SN-AGENT-MIBMacAddress.1.3.6.1.4.1.1991.1.1.3.2.7.1.20
snVLanByPortCfgVLanName
VLAN Community Name string.
columnOctetString.1.3.6.1.4.1.1991.1.1.3.2.7.1.21
snVLanByPortCfgRouterIntf
Optional: A virtual interface for router to the VLAN -- applied to router only. If a SNMP-Get value is zero, that means this object was not configured.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.22
snVLanByPortCfgRowStatus
Use object to delete a vlan entry.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.2.7.1.23
snVLanByPortCfgStpVersion
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' in…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.2.7.1.24
snVLanByPortCfgInOctets deprecated
The number of bytes received on this VLAN. This can be used as the per VE couter, if there is one-to-one map for VLAN-VE.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.2.7.1.25
snVLanByPortCfgMcastMode
Multicast (IGMP snooping) mode on the VLAN can be set either active or passive or disabled and the default is disabled. disabled(0)..... IP Multicast is disabled on this VLAN …
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.2.7.1.26
snVLanByPortCfgMcastVersion
Multicast version at this VLAN can be set 2 or 3, and the default is 2. The initial value is 0
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.27
snVLanByPortCfgStpMode
Spanning Tree Mode in the Switch Group can be set either enabled or disabled and the default is enabled mode. disable(0)...........no Spanning Tree enableStp(1).........activate …
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.2.7.1.3
snVLanByPortCfgStpPriority
dot1dStpPriority : The value of the write-able portion of the Stp ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar…
columnInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.4
snVLanByPortCfgStpGroupMaxAge
dot1dStpBridgeMaxAge: From RFC1493(Bridge MIB). The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.5
snVLanByPortCfgStpGroupHelloTime
dot1dStpBridgeHelloTime: From RFC1493(Bridge MIB). The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.6
snVLanByPortCfgStpGroupForwardDelay
dot1dStpBridgeForwardDelay : From RFC1493(Bridge MIB). The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies tha…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.7
snVLanByPortCfgBaseNumPorts
The number of ports controlled by this bridging entity.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.2.7.1.8
snVLanByPortCfgBaseType
Indicates what type of bridging this bridge can perform. If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port table for the…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.2.7.1.9