snSwPortInLinePowerWattage

FOUNDRY-SN-SWITCH-GROUP-MIB · .1.3.6.1.4.1.1991.1.1.3.3.1.1.59
MIB view Table view

Object

column deprecated r/w SNMPv2-SMIInteger32 
Adjust the inline power wattage. Valid value between 
1000 and 15400. Each unit is milliwatts.
This object can only be set after snSwPortInLinePowerControl
has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If
a port does not have inline power capability, reading this
object returns undefined value.

Context

MIB
FOUNDRY-SN-SWITCH-GROUP-MIB
OID
.1.3.6.1.4.1.1991.1.1.3.3.1.1.59
Type
column
Access
readwrite
Status
deprecated
Parent
snSwPortInfoEntry
Table
snSwPortInfoTable
Siblings
65

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snSwPortInfoPortNum deprecated
The port index. The bit 0 to bit 7: port number. The bit 8 to bit 11: slot number (slot for chassis only).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.1
snSwPortInfoPortQos deprecated
The Stand alone stackable switch Port Qos Priority values are: low(0) -- low prority high(1) -- high prority. The BigIron Port Qos Priority values are: level0(0), level1(1), lev…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.10
snSwPortInfoPhysAddress deprecated
The port physical address. The physical address represents the switch port.
columnPhysAddress.1.3.6.1.4.1.1991.1.1.3.3.1.1.11
snSwPortStatsInFrames deprecated
The total number of packets received on the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.12
snSwPortStatsOutFrames deprecated
The total number of packets transmitted out of the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.13
snSwPortStatsAlignErrors deprecated
dot3StatsAlignmentErrors : A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.14
snSwPortStatsFCSErrors deprecated
dot3StatsFCSErrors : A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The coun…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.15
snSwPortStatsMultiColliFrames deprecated
dot3StatsMultipleCollisionFrames : A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.16
snSwPortStatsFrameTooLongs deprecated
dot3StatsFrameTooLongs : A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance o…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.17
snSwPortStatsTxColliFrames deprecated
A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by a co…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.18
snSwPortStatsRxColliFrames deprecated
A count of successfully received frames on a particular interface for which transmission is inhibited by more than one collision. This object is not specified in dot3 but it has …
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.19
snSwPortInfoMonitorMode deprecated
DEPRECATED by snSwPortInfoMirrorMode and snPortMonitorTable.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.2
snSwPortStatsFrameTooShorts deprecated
A count of frames received on a particular interface that below the minimum permitted frame size.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.20
snSwPortLockAddressCount deprecated
The number of source MAC addresses are allowed for a port. Writing 0 to this object will allow any number of addresses.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.21
snSwPortStpPortEnable deprecated
The enabled/disabled status of the port.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.22
snSwPortDhcpGateListId deprecated
The ID for a DHCP gateway list entry relative to this switch port. 0 = unset or no assigned ID
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.23
snSwPortName deprecated
Port Name string.
columnOctetString.1.3.6.1.4.1.1991.1.1.3.3.1.1.24
snSwPortStatsInBcastFrames deprecated
The total number of broadcast packets received on the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.25
snSwPortStatsOutBcastFrames deprecated
The total number of broadcast packets transmitted out of the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.26
snSwPortStatsInMcastFrames deprecated
The total number of multicast packets received on the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.27
snSwPortStatsOutMcastFrames deprecated
The total number of multicast packets transmitted out of the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.28
snSwPortStatsInDiscard deprecated
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possibl…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.29
snSwPortInfoTagMode deprecated
For tagged port, we could have multiple VLANs per port. For untagged port or auto port, there is only one VLAN ID per port.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.3
snSwPortStatsOutDiscard deprecated
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding su…
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.30
snSwPortStatsMacStations deprecated
The total number of MAC Stations connected to the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.31
snSwPortCacheGroupId deprecated
Cache Group ID for the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.32
snSwPortTransGroupId deprecated
Transparent Group ID for the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.33
snSwPortInfoAutoNegotiate deprecated
This feature only applies to Gigabit Ethernet ports. If set to disable(0), port will be put to non-negotiation mode. If set to enable(1), port will start auto-negotiation indefini…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.34
snSwPortInfoFlowControl deprecated
Enable/Disbale port flow control.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.35
snSwPortInfoGigType deprecated
The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a …
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.36
snSwPortStatsLinkChange deprecated
The total number of link state change of the interface.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.1.3.3.1.1.37
snSwPortIfIndex deprecated
In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 1213 and RFC 1573.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.38
snSwPortDescr deprecated
A textual string containing the slot/port information about the interface.
columnFOUNDRY-SN-AGENT-MIBDisplayString.1.3.6.1.4.1.1991.1.1.3.3.1.1.39
snSwPortInfoChnMode deprecated
The port can be configured to operate in either half or full duplex mode. The values are: halfDuplex(1)...half duplex mode fullDuplex(2)...full duplex mode The read-back channel…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.4
snSwPortInOctets deprecated
The total number of octets received on the interface, including framing characters. This object is a 64-bit counter of the ifInOctets object, defined in RFC 1213. The octet string…
columnOctetString.1.3.6.1.4.1.1991.1.1.3.3.1.1.40
snSwPortOutOctets deprecated
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit counter of the ifOutOctets object, defined in RFC 1213. The octe…
columnOctetString.1.3.6.1.4.1.1991.1.1.3.3.1.1.41
snSwPortStatsInBitsPerSec deprecated
The number of bits per second received on the interface over a 5 minutes interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.3.3.1.1.42
snSwPortStatsOutBitsPerSec deprecated
The number of bits per second transmitted out of the interface over a 5 minutes interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.3.3.1.1.43
snSwPortStatsInPktsPerSec deprecated
The number of packets per second received on the interface over a 5 minutes interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.3.3.1.1.44
snSwPortStatsOutPktsPerSec deprecated
The number of packets per second transmitted out of the interface over a 5 minutes interval.
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.1991.1.1.3.3.1.1.45
snSwPortStatsInUtilization deprecated
The input network utilization in hundredths of a percent over a 5 minutes interval.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.46
snSwPortStatsOutUtilization deprecated
The output network utilization in hundredths of a percent over a 5 minutes interval.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.47
snSwPortFastSpanPortEnable deprecated
The enabled/disabled fast span port status of the port.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.48
snSwPortFastSpanUplinkEnable deprecated
The enabled/disabled fast span uplink status of the port.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.49
snSwPortInfoSpeed deprecated
The speed configuration for a port. The values are: none(0)..........link down or no traffic. sAutoSense(1)....Auto-sensing 10 or 100Mbits. s10M(2)..........10Mbits per second. s1…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.5
snSwPortVlanId deprecated
The ID of a VLAN of which this port is a member. Port must be untagged. For tagged port which belongs to multiple VLANs, this object return 0 which is an invalid VLAN ID value.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.50
snSwPortRouteOnly deprecated
Enable/Disable L2 switching of a routing switch port. By default, the routing switch performs routing first. If routing failed, it performs switching. Enable route only instrcuts …
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.51
snSwPortPresent deprecated
Indicate if the port is absent or present. This object only valid for M4 module
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.52
snSwPortGBICStatus deprecated
Indicate if the gig port has GBICs on them. If set to GBIC(1), it means that the port is GBIC. If set to miniGBIC(2), it means that the port miniGBIC. If set to empty(3), it mea…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.53
snSwPortStatsInKiloBitsPerSec deprecated
Bit rate in kilobits per second received on the 10G and faster interface over a 5 minutes interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.1.3.3.1.1.54
snSwPortStatsOutKiloBitsPerSec deprecated
Bit rate in kilobits per second transmitted out of the 10G and faster interface over a 5 minutes interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.1991.1.1.3.3.1.1.55
snSwPortLoadInterval deprecated
The time in seconds for which average port utilization should be carried out. The value should be incremental of 30 seconds, between the ranges specified.
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.56
snSwPortTagType deprecated
The IEEE802.1q tag type embedded in the length/type field of an Ethernet packet. It specifies that the 2 octets after the length/type field in an Ethernet packet is the tag value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.57
snSwPortInLinePowerControl deprecated
Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.58
snSwPortInfoMediaType deprecated
The media type for the port. The values are: other(1).........other or unknown media. m100BaseTX(2)....100Mbits per second copper. m100BaseFX(3)....100Mbits per second fiber…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.6
snSwPortInLinePowerClass deprecated
Adjust the inline power class. This object can only be set after snSwPortInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline …
columnInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.60
snSwPortInLinePowerPriority deprecated
Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.61
snSwPortInfoMirrorMode deprecated
Enable/disable mirror on this port.
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.62
snSwPortStatsInJumboFrames deprecated
The total number of jumbo packets received on the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.3.1.1.63
snSwPortStatsOutJumboFrames deprecated
The total number of jumbo packets transmitted out of the interface.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.1.3.3.1.1.64
snSwPortInLinePowerConsumed deprecated
Inline power consumed by the port. Each unit is milliwatts.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.1.3.3.1.1.66
snSwPortInLinePowerPDType deprecated
Inline Power device type 802.3af or Legacy device.
columnFOUNDRY-SN-AGENT-MIBDisplayString.1.3.6.1.4.1.1991.1.1.3.3.1.1.67
snSwPortInfoConnectorType deprecated
The type of connector that the port offers. The values are: other(1)...........other or unknown connector copper(2)..........Copper connector fiber(3)...........Fiber connector…
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.7
snSwPortInfoAdminStatus deprecated
The desired state of all ports. The testing(3) state indicates that no operational packets can be passed. (same as ifAdminStatus in MIB-II)
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.8
snSwPortInfoLinkStatus deprecated
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. (same as ifOperStatus in MIB-II)
columnEnumeration.1.3.6.1.4.1.1991.1.1.3.3.1.1.9