snSwPortInfoGigType
FOUNDRY-SN-SWITCH-GROUP-MIB ·
.1.3.6.1.4.1.1991.1.1.3.3.1.1.36
Object
column
deprecated
Enumeration
The media type for the port. The values are: m1000BaseSX(0)....1Gbits per second fiber, with a short wavelength transceiver. m1000BaseLX(1)....1Gbits per second fiber, with a long wavelength transceiver (3km). m1000BaseLH(2)....1Gbits per second fiber, with a special wavelength transceiver (50km). m1000BaseLHA(3)....1Gbits per second fiber, with a special wavelength transceiver (70km). m1000BaseLHB(4)....1Gbits per second fiber, with a special wavelength transceiver (150km). m1000BaseTX(5)....1Gbits per second copper (100meter). m10000BaseSR(6)....10Gbits per second fiber, with a short range wavelength transceiver (100m). m10000BaseLR(7)....10Gbits per second fiber, with a long range wavelength transceiver (10km). m10000BaseER(8)....10Gbits per second fiber, with a extended range wavelength transceiver (40km). sfpCWDM1470nm80Km(9)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 80 kms. sfpCWDM1490nm80Km(10)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 80 kms. sfpCWDM1510nm80Km(11)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 80 kms. sfpCWDM1530nm80Km(12)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 80 kms. sfpCWDM1550nm80Km(13)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 80 kms. sfpCWDM1570nm80Km(14)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 80 kms. sfpCWDM1590nm80Km(15)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 80 kms. sfpCWDM1610nm80Km(16)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 80 kms. sfpCWDM1470nm100Km(17)....1Gbits per second CWDM fiber, with a wavelength 1470nm, reach 100 kms. sfpCWDM1490nm100Km(18)....1Gbits per second CWDM fiber, with a wavelength 1490nm, reach 100 kms. sfpCWDM1510nm100Km(19)....1Gbits per second CWDM fiber, with a wavelength 1510nm, reach 100 kms. sfpCWDM1530nm100Km(20)....1Gbits per second CWDM fiber, with a wavelength 1530nm, reach 100 kms. sfpCWDM1550nm100Km(21)....1Gbits per second CWDM fiber, with a wavelength 1550nm, reach 100 kms. sfpCWDM1570nm100Km(22)....1Gbits per second CWDM fiber, with a wavelength 1570nm, reach 100 kms. sfpCWDM1590nm100Km(23)....1Gbits per second CWDM fiber, with a wavelength 1590nm, reach 100 kms. sfpCWDM1610nm100Km(24)....1Gbits per second CWDM fiber, with a wavelength 1610nm, reach 100 kms. m1000BaseLHX(25)...1Gbits per second fiber, with a special wavelength transceiver (150km). m2500BaseTX(50)...2.5GBASE fiber. m100GBaseTX(51) ..100G base fiber mMultiGigBZ(52) .. 2.5G/5G/10G multiGig copper m40GBaseTX(53) .. 40G base fiber m25GBaseFX(54) .. 25G base fiber notApplicable(255)....a non-gigabit port.
Context
- MIB
- FOUNDRY-SN-SWITCH-GROUP-MIB
- OID
.1.3.6.1.4.1.1991.1.1.3.3.1.1.36- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- snSwPortInfoEntry
- Table
- snSwPortInfoTable
- Siblings
- 65
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | m1000BaseSX |
1 | m1000BaseLX |
2 | m1000BaseLH |
3 | m1000BaseLHA |
4 | m1000BaseLHB |
5 | m1000BaseTX |
6 | m10000BaseSR |
7 | m10000BaseLR |
8 | m10000BaseER |
9 | sfpCWDM1470nm80Km |
10 | sfpCWDM1490nm80Km |
11 | sfpCWDM1510nm80Km |
12 | sfpCWDM1530nm80Km |
13 | sfpCWDM1550nm80Km |
14 | sfpCWDM1570nm80Km |
15 | sfpCWDM1590nm80Km |
16 | sfpCWDM1610nm80Km |
17 | sfpCWDM1470nm100Km |
18 | sfpCWDM1490nm100Km |
19 | sfpCWDM1510nm100Km |
20 | sfpCWDM1530nm100Km |
21 | sfpCWDM1550nm100Km |
22 | sfpCWDM1570nm100Km |
23 | sfpCWDM1590nm100Km |
24 | sfpCWDM1610nm100Km |
25 | m1000BaseLHX |
26 | m1000BaseSX2 |
27 | m1000BaseGBXU |
28 | m1000BaseGBXD |
50 | m2500BaseTX |
51 | m100GBaseTX |
52 | mMultiGigBZ |
53 | m40GBaseTX |
54 | m25GBaseFX |
255 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snSwPortInfoPortNum deprecated The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.1 |
| snSwPortInfoPortQos deprecated The Stand alone stackable switch Port Qos Priority values are:
low(0) -- low prority
high(1) -- high prority.
The BigIron Port Qos Priority values are:
level0(0), level1(1), lev… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.10 |
| snSwPortInfoPhysAddress deprecated The port physical address. The physical address
represents the switch port. | column | PhysAddress | .1.3.6.1.4.1.1991.1.1.3.3.1.1.11 |
| snSwPortStatsInFrames deprecated The total number of packets received on the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.12 |
| snSwPortStatsOutFrames deprecated The total number of packets transmitted out of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.13 |
| snSwPortStatsAlignErrors deprecated dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.14 |
| snSwPortStatsFCSErrors deprecated dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.
The coun… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.15 |
| snSwPortStatsMultiColliFrames deprecated dot3StatsMultipleCollisionFrames :
A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.16 |
| snSwPortStatsFrameTooLongs deprecated dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.
The count represented by an instance o… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.17 |
| snSwPortStatsTxColliFrames deprecated A count of successfully transmitted frames on
a particular interface for which transmission
is inhibited by more than one collision.
A frame that is counted by a co… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.18 |
| snSwPortStatsRxColliFrames deprecated A count of successfully received frames on
a particular interface for which transmission
is inhibited by more than one collision. This
object is not specified in dot3 but it has … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.19 |
| snSwPortInfoMonitorMode deprecated DEPRECATED by snSwPortInfoMirrorMode and
snPortMonitorTable. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.2 |
| snSwPortStatsFrameTooShorts deprecated A count of frames received on a particular
interface that below the minimum permitted
frame size. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.20 |
| snSwPortLockAddressCount deprecated The number of source MAC addresses are allowed
for a port. Writing 0 to this object will allow
any number of addresses. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.21 |
| snSwPortStpPortEnable deprecated The enabled/disabled status of the port. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.22 |
| snSwPortDhcpGateListId deprecated The ID for a DHCP gateway list entry relative
to this switch port. 0 = unset or no assigned ID | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.23 |
| snSwPortName deprecated Port Name string. | column | OctetString | .1.3.6.1.4.1.1991.1.1.3.3.1.1.24 |
| snSwPortStatsInBcastFrames deprecated The total number of broadcast packets received on the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.25 |
| snSwPortStatsOutBcastFrames deprecated The total number of broadcast packets transmitted out of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.26 |
| snSwPortStatsInMcastFrames deprecated The total number of multicast packets received on the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.27 |
| snSwPortStatsOutMcastFrames deprecated The total number of multicast packets transmitted out of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.28 |
| snSwPortStatsInDiscard deprecated The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possibl… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.29 |
| snSwPortInfoTagMode deprecated For tagged port, we could have multiple VLANs
per port. For untagged port or auto port, there
is only one VLAN ID per port. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.3 |
| snSwPortStatsOutDiscard deprecated The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding su… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.30 |
| snSwPortStatsMacStations deprecated The total number of MAC Stations connected to the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.31 |
| snSwPortCacheGroupId deprecated Cache Group ID for the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.32 |
| snSwPortTransGroupId deprecated Transparent Group ID for the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.33 |
| snSwPortInfoAutoNegotiate deprecated This feature only applies to Gigabit Ethernet ports. If set to
disable(0), port will be put to non-negotiation mode. If set to
enable(1), port will start auto-negotiation indefini… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.34 |
| snSwPortInfoFlowControl deprecated Enable/Disbale port flow control. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.35 |
| snSwPortStatsLinkChange deprecated The total number of link state change of the interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.37 |
| snSwPortIfIndex deprecated In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.38 |
| snSwPortDescr deprecated A textual string containing the slot/port information
about the interface. | column | FOUNDRY-SN-AGENT-MIBDisplayString | .1.3.6.1.4.1.1991.1.1.3.3.1.1.39 |
| snSwPortInfoChnMode deprecated The port can be configured to operate in either
half or full duplex mode. The values are:
halfDuplex(1)...half duplex mode
fullDuplex(2)...full duplex mode
The read-back channel… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.4 |
| snSwPortInOctets deprecated The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string… | column | OctetString | .1.3.6.1.4.1.1991.1.1.3.3.1.1.40 |
| snSwPortOutOctets deprecated The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octe… | column | OctetString | .1.3.6.1.4.1.1991.1.1.3.3.1.1.41 |
| snSwPortStatsInBitsPerSec deprecated The number of bits per second received on the interface
over a 5 minutes interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.42 |
| snSwPortStatsOutBitsPerSec deprecated The number of bits per second transmitted out of the interface
over a 5 minutes interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.43 |
| snSwPortStatsInPktsPerSec deprecated The number of packets per second received on the interface
over a 5 minutes interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.44 |
| snSwPortStatsOutPktsPerSec deprecated The number of packets per second transmitted out of the interface
over a 5 minutes interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.45 |
| snSwPortStatsInUtilization deprecated The input network utilization in hundredths of a percent
over a 5 minutes interval. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.46 |
| snSwPortStatsOutUtilization deprecated The output network utilization in hundredths of a percent
over a 5 minutes interval. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.47 |
| snSwPortFastSpanPortEnable deprecated The enabled/disabled fast span port status of the port. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.48 |
| snSwPortFastSpanUplinkEnable deprecated The enabled/disabled fast span uplink status of the port. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.49 |
| snSwPortInfoSpeed deprecated The speed configuration for a port. The values are:
none(0)..........link down or no traffic.
sAutoSense(1)....Auto-sensing 10 or 100Mbits.
s10M(2)..........10Mbits per second.
s1… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.5 |
| snSwPortVlanId deprecated The ID of a VLAN of which this port is a member. Port must
be untagged. For tagged port which belongs to multiple
VLANs, this object return 0 which is an invalid VLAN ID
value. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.50 |
| snSwPortRouteOnly deprecated Enable/Disable L2 switching of a routing switch port.
By default, the routing switch performs routing first.
If routing failed, it performs switching. Enable route
only instrcuts … | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.51 |
| snSwPortPresent deprecated Indicate if the port is absent or present.
This object only valid for M4 module | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.52 |
| snSwPortGBICStatus deprecated Indicate if the gig port has GBICs on them.
If set to GBIC(1), it means that the port is GBIC.
If set to miniGBIC(2), it means that the port miniGBIC.
If set to empty(3), it mea… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.53 |
| snSwPortStatsInKiloBitsPerSec deprecated Bit rate in kilobits per second received on the 10G and faster interface
over a 5 minutes interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.54 |
| snSwPortStatsOutKiloBitsPerSec deprecated Bit rate in kilobits per second transmitted out of the 10G and faster interface
over a 5 minutes interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.55 |
| snSwPortLoadInterval deprecated The time in seconds for which average port utilization should be carried out.
The value should be incremental of 30 seconds, between the ranges specified. | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.56 |
| snSwPortTagType deprecated The IEEE802.1q tag type embedded in the length/type field of
an Ethernet packet. It specifies that the 2 octets after the
length/type field in an Ethernet packet is the tag value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.57 |
| snSwPortInLinePowerControl deprecated Control inline power on/off to a port. If a port does not
have inline power capability, reading this object returns
'other(1)'. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.58 |
| snSwPortInLinePowerWattage deprecated Adjust the inline power wattage. Valid value between
1000 and 15400. Each unit is milliwatts.
This object can only be set after snSwPortInLinePowerControl
has been set to 'enable… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.59 |
| snSwPortInfoMediaType deprecated The media type for the port. The
values are:
other(1).........other or unknown media.
m100BaseTX(2)....100Mbits per second copper.
m100BaseFX(3)....100Mbits per second fiber… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.6 |
| snSwPortInLinePowerClass deprecated Adjust the inline power class. This object can only be set
after snSwPortInLinePowerControl has been set to 'enable(3)'
or 'enableLegacyDevice(4)'. If a port does not have inline
… | column | Integer32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.60 |
| snSwPortInLinePowerPriority deprecated Inline power allocation priority for the power device
0- Not a POE port, 1- Critical, 2- High, 3- Low,
4- Medium, 5- other. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.61 |
| snSwPortInfoMirrorMode deprecated Enable/disable mirror on this port. | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.62 |
| snSwPortStatsInJumboFrames deprecated The total number of jumbo packets received on the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.63 |
| snSwPortStatsOutJumboFrames deprecated The total number of jumbo packets transmitted out of the interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.64 |
| snSwPortInLinePowerConsumed deprecated Inline power consumed by the port. Each unit is milliwatts. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1991.1.1.3.3.1.1.66 |
| snSwPortInLinePowerPDType deprecated Inline Power device type 802.3af or Legacy device. | column | FOUNDRY-SN-AGENT-MIBDisplayString | .1.3.6.1.4.1.1991.1.1.3.3.1.1.67 |
| snSwPortInfoConnectorType deprecated The type of connector that the port offers.
The values are:
other(1)...........other or unknown connector
copper(2)..........Copper connector
fiber(3)...........Fiber connector… | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.7 |
| snSwPortInfoAdminStatus deprecated The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II) | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.8 |
| snSwPortInfoLinkStatus deprecated The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II) | column | Enumeration | .1.3.6.1.4.1.1991.1.1.3.3.1.1.9 |