ES-MODULE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

esModuleTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.1.2.1 · 1 row entry · 19 columns

Open in standard view

Table of descriptive and status information about
the modules.

esModuleEntry entry .1.3.6.1.4.1.437.1.1.2.1.2.1.1

An entry in the table, containing information
about one of the modules.

Indexes

esModuleIndex

Column Syntax OID

esModuleIndex mandatory

This object identifies the module for which
this entry contains information. This value
is never greater than esModuleCapacity.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.1

esModuleStatus mandatory

Current operational status of the module. This value
is the same as swPortStatus for the corresponding
switched port. Possible values are:
enabled : normal operation (transmit and receive)
disabled-mgmt …

Enumeration

Enumerated Values:

1	enabled
2	disabled-mgmt
3	suspended-linkbeat
4	suspended-jabber
5	suspended-violation
7	disabled-violation
9	suspended-not-present
10	suspended-not-recognized
11	reset
12	suspended-ringdown
13	suspended-stp
14	disabled-self-test
15	enabled-degraded
16	suspended-atm-lane-down
17	suspended-no-vlan
18	disabled-no-vlan
19	suspended-atm-network-down
20	suspended-disl

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.2

esModuleAdminStatus mandatory

By explicit management action, change the port status
to either
enabled : normal status (transmit and receive)
disabled-mgmt: port is no longer in use.
This value is the same as swPortAdminStatus for the
correspond…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.3

esModuleDescr mandatory

A text string which includes the full name and
version identification of the module's hardware
type.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.4

esModuleID mandatory

A text representation of the Cisco specified
identifier for the installed module, or 'notPresent'.

OctetString

Constraints:
range: 0-60

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.5

esModuleVersion mandatory

The Cisco specified unique identification
for the module version, ranging from 1 to 254.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.6

esModuleObjectID mandatory

The vendor's authoritative identification of the
module. This value may be allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides a
straight-forward and unambiguous means for
determining what kind of g…

ObjectIdentifier

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.7

esModulePortCapacity mandatory

The number of external port attachments provided by the
module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.8

esModuleReset mandatory

Setting this object to reset causes the module to be
forced into a reset state. The reset state is a module
specific condition in which the module's packet operations
will cease while the module resets to a known state.

Enumerationr/w

Enumerated Values:

1	reset
2	noReset

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.9

esModuleLastStatusChange mandatory

Contains the value of sysUpTime at the time that the value
of the esModuleStatus object for this module last changed.
A value of zero indicates that the group's operational
status has not changed since the agent last re…

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.10

esModuleCollisionPeriods mandatory

Contains the count of times the firmware has toggled the
front panel module collision LED from the off state to the
on state. Successive reads of the counter may network
management software an indication of the rate of…

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.11

esModuleLinkDisplayMap mandatory

A bit array where the presence of a particular bit
indicates a lit link LED for a module port.

Each octet within the value of this object specifies a
set of eight link LEDs, with the first octet specifyin…

OctetString

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.12

esModuleDisabledDisplayMap mandatory

A bit array where the presence of a particular bit
indicates a lit disabled LED for a module port.

Each octet within the value of this object specifies a
set of eight disabled LEDs, with the first octet s…

OctetString

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.13

esModuleBroadcastStormBlocked mandatory

The current broadcast forwarding status of this module.
If this module is blocked by broadcast storm control, the
switch drops all broadcasts received from the module.
If the module is a multi-port repeater, broadcast
r…

Enumeration

Enumerated Values:

1	notBlocked
2	blocked

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.14

esModuleFirmwareVersion mandatory

This object returns the version number of the
firmware stored in FLASH memory on the
module. The string has the
format 'v1.00' for the FDDI module.
For the ATM module, the string is longer.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.15

esModuleBOOTCodeVersion mandatory

This object returns the version number of the
BOOT code stored in permanent FLASH memory on
the module. The string has the
format 'v1.00' for the FDDI module.
For the ATM module, the string is longer.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.16

esModuleFlashStatus mandatory

A string of up to 80 characters indicating the
status of the firmware stored in the module's
FLASH memory. The string includes the firmware
revision, the data and time of the last upgrade,
the source of the upgrade, as…

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.17

esModuleResetToFactoryDefaults mandatory

Setting this object to reset(2) will cause the
settings on the module to revert to factory
defaults. The module will then be reset by the
system. The module's packet operations will
cease while the module resets to a …

Enumerationr/w

Enumerated Values:

1	noReset
2	reset

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.18

esModuleSwPortIndex mandatory

This is the value of swPortIndex object in the
STANDALONE-ETHERNET-SWITCH-MIB corresponding
to the module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.1.2.1.1.19

esModulePortTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.1.3.1 · 1 row entry · 9 columns

Open in standard view

Table of descriptive and status information about
the individual ports in a module.

esModulePortEntry entry .1.3.6.1.4.1.437.1.1.2.1.3.1.1

An entry in the table, containing information
about one of the repeater ports.

Indexes

esModuleSlotIndex esModulePortIndex

Column Syntax OID

esModuleSlotIndex mandatory

This is the value of esModuleIndex object of the module
which this port belongs to. This value is never greater
than esModuleCapacity.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.1

esModulePortIndex mandatory

This object identifies the port for which
this entry contains information. This value
is never greater than esModulePortCapacity.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.2

esModulePortDescr mandatory

A descriptive string of up to 60 characters used by the
network administrator to name the port.

OctetStringr/w

Constraints:
range: 0-60

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.3

esModulePortAdminStatus mandatory

By explicit management action, change the port status
to either
enabled : normal status (transmit and receive)
disabled : the port neither transmits nor receives.
Once disabled, a por…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.4

esModulePortAutoPartitionState mandatory

Indicates whether the port is currently partitioned by
the repeater's auto-partition protection.

Enumeration

Enumerated Values:

1	notAutoPartitioned
2	autoPartitioned

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.5

esModulePortOperStatus mandatory

Indicates the port's operational status.
enabled : port is enabled and working
notOperational : the port neither transmits nor receives
suspended-not-present: the module group is not installed.

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	suspended-not-present

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.6

esModulePortLinkbeatStatus mandatory

The port's current linkbeat status.

Enumeration

Enumerated Values:

1	linkbeat
2	noLinkbeat

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.7

esModulePortConnectorType mandatory

The connector type for the port.
It is one of

other : none of the following (unknown)
rj45 : common unshielded twisted pair connector
bnc : thin-coax (BNC)
aui : thick-coax (A…

Enumeration

Enumerated Values:

1	other
2	rj45
3	bnc
4	aui
5	fiber-sc
6	fiber-st
7	empty
8	fddi-mic

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.8

esModulePortReceivePeriods mandatory

Contains the count of times the front panel port receive
activity LED has been toggled from the off state to the on
state. Successive reads of this counter give network
management software an indication of receive acti…

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.437.1.1.2.1.3.1.1.9

fmCfgTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.2.1.1.1 · 1 row entry · 13 columns

Open in standard view

Table of configuration and status information about
FDDI modules.

fmCfgEntry entry .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1

An entry in the table, containing information
about one a FDDI module.

Indexes

fmCfgIndex

Column Syntax OID

fmCfgIndex mandatory

This object identifies the module for which
this entry contains information. This value
is never greater than esModuleCapacity.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.1

fmCfgFirmwareVersion mandatory

This object returns the version number of the
firmware stored in FLASH memory on the
FDDI module. The string has the
format 'v1.00'.

OctetString

Constraints:
range: 0-10

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.2

fmCfgBOOTCodeVersion mandatory

This object returns the version number of the
BOOT code stored in permanent FLASH memory on
the FDDI module. The string has the
format 'v1.00'.

OctetString

Constraints:
range: 0-10

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.3

fmCfgPOSTResult mandatory

This object indicates the result of the FDDI
module's Power On Self Test (POST). If the module
passed POST, this item will return noFailure(1).

Enumeration

Enumerated Values:

1	noFailure
2	prom
3	cpu
4	flash
5	dram
6	arbiter
7	shared-ram
8	ethernet
9	fddi-mac
10	fddi-phy-a
11	fddi-phy-b
12	packet-ram

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.4

fmCfgPOSTTest mandatory

This object indicates the specific test that caused
the POST to fail. If the module passed POST, this
item will return noFailure(1).

Enumeration

Enumerated Values:

1	noFailure
2	invalid-marker
3	checksum
4	ram-quick-scan
5	ram-byte-test
6	checkerboard
7	arbiter-id
8	read-only-register
9	read-write-register
10	ethernet-interrupt
11	loopback
12	invalid-version

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.5

fmCfgPOSTLoopbackResult mandatory

In the event that the FDDI module fails the loopback
test during POST, this object will indicate which
portion of the test caused the failure. If the value
of fmCfgPOSTTest is anything other than loopback(11),
this obj…

Enumeration

Enumerated Values:

1	noFailure
2	cannot-transmit
3	receive-timeout
4	data-mismatch
5	length-mismatch
6	receiver-error
7	buffer-error

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.6

fmCfgFlashStatus mandatory

A string of up to 80 characters indicating the
status of the firmware stored in the FDDI module's
FLASH memory. The string includes the firmware
revision, the data and time of the last upgrade,
the source of the upgrad…

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.7

fmCfgResetToFactoryDefaults mandatory

Setting this object to reset(2) will cause the
settings on the FDDI module to revert to factory
defaults. The module will then be reset by the
system. The module's packet operations will
cease while the module resets …

Enumerationr/w

Enumerated Values:

1	noReset
2	reset

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.8

fmCfgResetModule mandatory

Setting this object to reset(2) causes the module to be
forced into a reset state. During the reset state, the
module's packet operations will cease while the module
resets to a known state.

Enumerationr/w

Enumerated Values:

1	noReset
2	reset

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.9

fmCfgNovellFDDISNAPTranslation mandatory

This object specifies the Ethernet frame type that
the FDDI module will translate Novell SNAP FDDI frames into.

automatic(1): the FDDI module will automatically
learn which frame t…

Enumerationr/w

Enumerated Values:

1	automatic
2	ethernet-8023
3	ethernet-SNAP
4	ethernet-II
5	drop

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.10

fmCfgUnmatchedSNAPDestination mandatory

This object specifies what the FDDI module is to do with
Novell SNAP FDDI frames whose destination frame type cannot
be determined. The value of this object is only valid when
fmCfgNovellFDDISNAPTranslation is set to a…

Enumerationr/w

Enumerated Values:

1	all
2	ethernet-8023
3	ethernet-SNAP
4	ethernet-II
5	drop

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.11

fmCfgAuthorizationChecking mandatory

This object controls enabling and disabling of authorization
string checking by the SMT entity. When enabled, the FDDI
module will use the current authorization string to verify SMT
requests from remote stations. This…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.12

fmCfgAuthorizationString mandatory

This item specifies the string to be used in the authentication
of SMT requests. The length is from 0 to 32 bytes and must be
a multiple of 4 bytes. This item is only used when authorization
string checking is enabled.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.13

fmXlateToEthTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.2.1.2.1 · 1 row entry · 11 columns

Open in standard view

Table of statistics that count the number of
frames successfully forwarded from the FDDI
module to the switch forwarding engine.

fmXlateToEthEntry entry .1.3.6.1.4.1.437.1.1.2.2.1.2.1.1

An entry in the table, containing information
about a FDDI module.

Indexes

fmXlateToEthIndex

Column	Syntax	OID
fmXlateToEthIndex mandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.1`
fmXlateToEthNovellSnapToRaw8023Frames mandatory This object is a count of the number of Novell SNAP FDDI frames that have been converted to Raw 802.3 Ethernet frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.2`
fmXlateToEthNovellSnapToEthIIFrames mandatory This object is a count of the number of Novell SNAP FDDI frames that have been converted to Ethernet II frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.3`
fmXlateToEthNovellSnapToSnapFrames mandatory This object is a count of the number of Novell SNAP FDDI frames that have been converted to Novell SNAP Ethernet frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.4`
fmXlateToEthAppleTalkSnapToSnapFrames mandatory This object is a count of the number of AppleTalk SNAP FDDI frames that have been converted to Novell SNAP Ethernet frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.5`
fmXlateToEthIpSnapForFragmentationFrames mandatory This object is a count of the number of IP FDDI frames that were fragmented.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.6`
fmXlateToEthIpSnapFragmentedFrames mandatory This object is a count of the number of Ethernet frames that were forwarded to the switch forwarding engine as a result of IP fragmentation.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.7`
fmXlateToEthBridgeTunnelToEthIIFrames mandatory This object is a count of the number of Bridge Tunnel FDDI frames that have been converted to Ethernet II frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.8`
fmXlateToEthOtherSnapToEthIIFrames mandatory This object is a count of the number of SNAP FDDI frames that do not fall into one of the previous SNAP FDDI categories that have been converted to Ethernet II frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.9`
fmXlateToEthOtherSnapToSnapFrames mandatory This object is a count of the number of SNAP FDDI frames that do not fall into one of the previous SNAP FDDI categories that have been converted to Ethernet SNAP frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.10`
fmXlateToEth8022To8022Frames mandatory This object is a count of the number of 802.2 FDDI frames that have been converted to Ethernet 802.2 frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.2.1.1.11`

fmXlateToFDDITable

table mandatory

.1.3.6.1.4.1.437.1.1.2.2.1.3.1 · 1 row entry · 8 columns

Open in standard view

Table of statistics that count the number of
frames successfully forwarded from the switch
forwarding engine to the FDDI ring.

fmXlateToFDDIEntry entry .1.3.6.1.4.1.437.1.1.2.2.1.3.1.1

An entry in the table, containing information
about a FDDI module.

Indexes

fmXlateToFDDIIndex

Column	Syntax	OID
fmXlateToFDDIIndex mandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.1`
fmXlateToFDDINovellRaw8023ToSnapFrames mandatory This object is a count of the number of Novell Raw 802.3 Ethernet frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.2`
fmXlateToFDDINovellEthIIToSnapFrames mandatory This object is a count of the number of Ethernet II frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.3`
fmXlateToFDDINovellSnapToSnapFrames mandatory This object is a count of the number of Novell SNAP Ethernet frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.4`
fmXlateToFDDIEthIIToBridgeTunnelFrames mandatory This object is a count of the number of Ethernet II frames that have been converted to Bridge Tunnel FDDI frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.5`
fmXlateToFDDIEthIIToSnapFrames mandatory This object is a count of the number of Ethernet II frames that have been converted to SNAP FDDI frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.6`
fmXlateToFDDIOtherSnapToSnapFrames mandatory This object is a count of the number of SNAP frames that do not fall into one of the above listed SNAP type categories that have been translated to Ethernet II.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.7`
fmXlateToFDDI8022To8022Frames mandatory This object is a count of the number of FDDI 802.2 frames that have been converted to Ethernet 802.2 frames.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.3.1.1.8`

fmFilterTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.2.1.4.1 · 1 row entry · 17 columns

Open in standard view

Table of statistics that count the number of
frames that were not forwarded by the FDDI module.

fmFilterEntry entry .1.3.6.1.4.1.437.1.1.2.2.1.4.1.1

An entry in the table, containing information
about a FDDI module.

Indexes

fmFilterIndex

Column	Syntax	OID
fmFilterIndex mandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.1`
fmFilterFcsInvalidFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid FCS.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.2`
fmFilterDataLengthFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid data length.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.3`
fmFilterErrorIndFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame's error indication flag was set.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.4`
fmFilterFddiFifoOverrunFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the FDDI FIFO experienced an overflow.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.5`
fmFilterFddiInternalErrorFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the module experienced an internal error.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.6`
fmFilterNoBufferSpaceFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the module did not have sufficient buffer space.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.7`
fmFilterNoEndDelimitFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid end delimiter.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.8`
fmFilterNoLlcHeaderFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid LLC header.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.9`
fmFilterSourceRouteFrames mandatory The FDDI module does not forward source routing frames. This object is a count of the number of such frames that were filtered.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.10`
fmFilterNoSnapHeaderFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame did not have a valid SNAP header.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.11`
fmFilterTooLargeFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame was too large.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.12`
fmFilterNovellSnapFilteredFrames mandatory This object is a count of the number of Novell SNAP FDDI frames that were filtered by the module.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.13`
fmFilterCantFragmentFrames mandatory This object is a count of the number of FDDI IP frames that were not forwarded because the module was unable to fragment the frame.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.14`
fmFilterBadIpHeaderFrames mandatory This object is a count of the number of FDDI frames that were not forwarded because the frame contained an invalid IP header.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.15`
fmFilterRingDownDiscards mandatory This object is a count of the number of FDDI frames that were not forwarded because the FDDI ring was not operational.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.16`
fmFilterNovellOtherFilteredFrames mandatory This object is the sum of the Novell Ethernet frames that were not forwarded because they contained an invalid size field and the number of Novell Ethernet frames that were not forwarded because the FDDI module was conf…	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.1.4.1.1.17`

fmAtmCfgTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.2.2.1.1 · 1 row entry · 5 columns

Open in standard view

Table of configuration and status information about
ATM modules.

fmAtmCfgEntry entry .1.3.6.1.4.1.437.1.1.2.2.2.1.1.1

An entry in the table, containing information
about one ATM module.

Indexes

fmAtmCfgIndex

Column Syntax OID

fmAtmCfgIndex mandatory

This object identifies the module for which
this entry contains information. This value
is never greater than esModuleCapacity.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.1

fmAtmCfgPOSTResult mandatory

This object indicates the result of the ATM
module's Power On Self Test (POST), that is, which
module component, if any, failed POST. If the module
passed POST, this item will return no-failure(2).

Enumeration

Enumerated Values:

1	other
2	unknown
3	no-failure
4	fpga
5	shared-memory
6	host-interface
7	ethernet-controller
8	sar-controller
9	sar-memory
10	framer
11	traffic-co-processor
12	traffic-co-processor-memory
13	flash

.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.2

fmAtmCfgPOSTTest mandatory

This object indicates the specific test that caused the
POST to fail. If the ATM module passed POST, this
item will return no-failure(2).

Enumeration

Enumerated Values:

1	other
2	unknown
3	no-failure
4	refresh
5	quick-scan-word
6	quick-scan-byte
7	byte-pattern
8	checkerboard
9	no-response
10	data-mismatch
11	interrupt
12	control-memory
13	checksum
14	read-only-configuration-register
15	read-write-configuration-register
16	read-only-register
17	read-write-register
18	local-loopback
19	host-loopback
20	module-to-host-interrupt
21	host-to-module-interrupt

.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.3

fmAtmCfgPOSTLoopbackResult mandatory

In the event that the ATM module fails a loopback
test during POST, this object will indicate which
portion of the test caused the failure. If the value
of fmAtmCfgPOSTTest is anything other than
local-loopback(17) or …

Enumeration

Enumerated Values:

1	other
2	unknown
3	no-failure
4	cannot-transmit
5	receive-timeout
6	data-mismatch
7	length-mismatch
8	receiver-error
9	buffer-error

.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.4

fmAtmCfgFramingMode mandatory

The mode of operation for the SONET PLIM.
The default value is sts-3c(1).

Enumeration

Enumerated Values:

1	sts-3c
2	stm-1

.1.3.6.1.4.1.437.1.1.2.2.2.1.1.1.5

fmAtmRxStatTable

table mandatory

.1.3.6.1.4.1.437.1.1.2.2.2.2.1 · 1 row entry · 8 columns

Open in standard view

Table of receive statistics on ATM modules.

fmAtmRxStatEntry entry .1.3.6.1.4.1.437.1.1.2.2.2.2.1.1

An entry in the table, containing receive statistics
about one ATM module.

Indexes

fmAtmRxStatIndex

Column	Syntax	OID
fmAtmRxStatIndex mandatory This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.1`
fmAtmRxControlFrames mandatory A count of number of AAL5 control frames received by the module.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.2`
fmAtmRxLocalLecFrames mandatory A count of AAL5 frames received with LEC ids matching the module's LEC id. These frames are discarded.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.3`
fmAtmRxNoBufferDiscards mandatory A count of AAL5 frames received that were discarded due to a lack of frame buffer resources in the module's forwarding engine.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.4`
fmAtmRxCRCErrors mandatory A count of AAL5 frames received that were discarded due to CRC errors.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.5`
fmAtmRxFrameTooLongs mandatory A count of AAL5 frames received that exceed the maximum permitted frame size as defined by ifMtu object the port.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.6`
fmAtmRxOtherDiscards mandatory A count of AAL5 frames received that were discarded due to reasons other than a lack of frame buffer resources in the module's forwarding engine, errors, frames exceeding maximum frame size, or frames with LEC id matchi…	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.7`
fmAtmRxHecCellErrors mandatory A count of ATM cells received with errors in HEC header.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.437.1.1.2.2.2.2.1.1.8`