fmCfgAuthorizationChecking
ES-MODULE-MIB ·
.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.12
Object
column
mandatory
r/w
Enumeration
This object controls enabling and disabling of authorization string checking by the SMT entity. When enabled, the FDDI module will use the current authorization string to verify SMT requests from remote stations. This item is disabled by default.
Context
- MIB
- ES-MODULE-MIB
- OID
.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- fmCfgEntry
- Table
- fmCfgTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fmCfgIndex mandatory This object identifies the module for which
this entry contains information. This value
is never greater than esModuleCapacity. | column | Integer32 | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.1 |
| fmCfgNovellFDDISNAPTranslation mandatory This object specifies the Ethernet frame type that
the FDDI module will translate Novell SNAP FDDI frames into.
automatic(1): the FDDI module will automaticall… | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.10 |
| fmCfgUnmatchedSNAPDestination mandatory This object specifies what the FDDI module is to do with
Novell SNAP FDDI frames whose destination frame type cannot
be determined. The value of this object is only valid when
fm… | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.11 |
| fmCfgAuthorizationString mandatory This item specifies the string to be used in the authentication
of SMT requests. The length is from 0 to 32 bytes and must be
a multiple of 4 bytes. This item is only used when … | column | OctetString | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.13 |
| fmCfgFirmwareVersion mandatory This object returns the version number of the
firmware stored in FLASH memory on the
FDDI module. The string has the
format 'v1.00'. | column | OctetString | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.2 |
| fmCfgBOOTCodeVersion mandatory This object returns the version number of the
BOOT code stored in permanent FLASH memory on
the FDDI module. The string has the
format 'v1.00'. | column | OctetString | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.3 |
| fmCfgPOSTResult mandatory This object indicates the result of the FDDI
module's Power On Self Test (POST). If the module
passed POST, this item will return noFailure(1). | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.4 |
| fmCfgPOSTTest mandatory This object indicates the specific test that caused
the POST to fail. If the module passed POST, this
item will return noFailure(1). | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.5 |
| fmCfgPOSTLoopbackResult mandatory In the event that the FDDI module fails the loopback
test during POST, this object will indicate which
portion of the test caused the failure. If the value
of fmCfgPOSTTest is an… | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.6 |
| fmCfgFlashStatus mandatory A string of up to 80 characters indicating the
status of the firmware stored in the FDDI module's
FLASH memory. The string includes the firmware
revision, the data and time of th… | column | OctetString | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.7 |
| fmCfgResetToFactoryDefaults mandatory Setting this object to reset(2) will cause the
settings on the FDDI module to revert to factory
defaults. The module will then be reset by the
system. The module's packet operat… | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.8 |
| fmCfgResetModule mandatory Setting this object to reset(2) causes the module to be
forced into a reset state. During the reset state, the
module's packet operations will cease while the module
resets to a … | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.9 |