esModuleAdminStatus
ES-MODULE-MIB ·
.1.3.6.1.4.1.437.1.1.2.1.2.1.1.3
Object
column
mandatory
r/w
Enumeration
By explicit management action, change the port status to either enabled : normal status (transmit and receive) disabled-mgmt: port is no longer in use. This value is the same as swPortAdminStatus for the corresponding switched port.
Context
- MIB
- ES-MODULE-MIB
- OID
.1.3.6.1.4.1.437.1.1.2.1.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- esModuleEntry
- Table
- esModuleTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esModuleIndex mandatory This object identifies the module for which
this entry contains information. This value
is never greater than esModuleCapacity. | column | Integer32 | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.1 |
| esModuleLastStatusChange mandatory Contains the value of sysUpTime at the time that the value
of the esModuleStatus object for this module last changed.
A value of zero indicates that the group's operational
status… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.10 |
| esModuleCollisionPeriods mandatory Contains the count of times the firmware has toggled the
front panel module collision LED from the off state to the
on state. Successive reads of the counter may network
manageme… | column | RFC1155-SMICounter | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.11 |
| esModuleLinkDisplayMap mandatory A bit array where the presence of a particular bit
indicates a lit link LED for a module port.
Each octet within the value of this object specifies a
set of eight l… | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.12 |
| esModuleDisabledDisplayMap mandatory A bit array where the presence of a particular bit
indicates a lit disabled LED for a module port.
Each octet within the value of this object specifies a
set of eig… | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.13 |
| esModuleBroadcastStormBlocked mandatory The current broadcast forwarding status of this module.
If this module is blocked by broadcast storm control, the
switch drops all broadcasts received from the module.
If the modu… | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.14 |
| esModuleFirmwareVersion mandatory This object returns the version number of the
firmware stored in FLASH memory on the
module. The string has the
format 'v1.00' for the FDDI module.
For the ATM module, the string… | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.15 |
| esModuleBOOTCodeVersion mandatory This object returns the version number of the
BOOT code stored in permanent FLASH memory on
the module. The string has the
format 'v1.00' for the FDDI module.
For the ATM module,… | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.16 |
| esModuleFlashStatus mandatory A string of up to 80 characters indicating the
status of the firmware stored in the module's
FLASH memory. The string includes the firmware
revision, the data and time of the las… | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.17 |
| esModuleResetToFactoryDefaults mandatory Setting this object to reset(2) will cause the
settings on the module to revert to factory
defaults. The module will then be reset by the
system. The module's packet operations … | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.18 |
| esModuleSwPortIndex mandatory This is the value of swPortIndex object in the
STANDALONE-ETHERNET-SWITCH-MIB corresponding
to the module. | column | Integer32 | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.19 |
| esModuleStatus mandatory Current operational status of the module. This value
is the same as swPortStatus for the corresponding
switched port. Possible values are:
enabled : normal operation… | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.2 |
| esModuleDescr mandatory A text string which includes the full name and
version identification of the module's hardware
type. | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.4 |
| esModuleID mandatory A text representation of the Cisco specified
identifier for the installed module, or 'notPresent'. | column | OctetString | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.5 |
| esModuleVersion mandatory The Cisco specified unique identification
for the module version, ranging from 1 to 254. | column | Integer32 | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.6 |
| esModuleObjectID mandatory The vendor's authoritative identification of the
module. This value may be allocated within the SMI
enterprises subtree (1.3.6.1.4.1) and provides a
straight-forward and unambigu… | column | ObjectIdentifier | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.7 |
| esModulePortCapacity mandatory The number of external port attachments provided by the
module. | column | Integer32 | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.8 |
| esModuleReset mandatory Setting this object to reset causes the module to be
forced into a reset state. The reset state is a module
specific condition in which the module's packet operations
will cease … | column | Enumeration | .1.3.6.1.4.1.437.1.1.2.1.2.1.1.9 |