fmCfgFlashStatus

ES-MODULE-MIB · .1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.7
MIB view Table view

Object

column mandatory OctetString 
A string of up to 80 characters indicating the
status of the firmware stored in the FDDI module's
FLASH memory.  The string includes the firmware
revision, the data and time of the last upgrade,
the source of the upgrade, as well as the validity
of the firmware.  The string is in net ASCII and
conforms to one of the following formats:
              
For factory installed firmware:
              
' v1.00 factory installed: valid'
              
For out-of-band upgrades:
              
' v1.00 written 07-22-1994 08:19:15 from serial terminal: valid'
              
For in-band upgrades:
              
' v1.00 written 07-22-1994 12:19:15 from 192.009.200.200: invalid'

Context

MIB
ES-MODULE-MIB
OID
.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.7
Type
column
Access
readonly
Status
mandatory
Parent
fmCfgEntry
Table
fmCfgTable
Siblings
12

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-80

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fmCfgIndex mandatory
This object identifies the module for which this entry contains information. This value is never greater than esModuleCapacity.
columnInteger32.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.1
fmCfgNovellFDDISNAPTranslation mandatory
This object specifies the Ethernet frame type that the FDDI module will translate Novell SNAP FDDI frames into. automatic(1): the FDDI module will automaticall…
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.10
fmCfgUnmatchedSNAPDestination mandatory
This object specifies what the FDDI module is to do with Novell SNAP FDDI frames whose destination frame type cannot be determined. The value of this object is only valid when fm…
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.11
fmCfgAuthorizationChecking mandatory
This object controls enabling and disabling of authorization string checking by the SMT entity. When enabled, the FDDI module will use the current authorization string to verify …
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.12
fmCfgAuthorizationString mandatory
This item specifies the string to be used in the authentication of SMT requests. The length is from 0 to 32 bytes and must be a multiple of 4 bytes. This item is only used when …
columnOctetString.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.13
fmCfgFirmwareVersion mandatory
This object returns the version number of the firmware stored in FLASH memory on the FDDI module. The string has the format 'v1.00'.
columnOctetString.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.2
fmCfgBOOTCodeVersion mandatory
This object returns the version number of the BOOT code stored in permanent FLASH memory on the FDDI module. The string has the format 'v1.00'.
columnOctetString.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.3
fmCfgPOSTResult mandatory
This object indicates the result of the FDDI module's Power On Self Test (POST). If the module passed POST, this item will return noFailure(1).
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.4
fmCfgPOSTTest mandatory
This object indicates the specific test that caused the POST to fail. If the module passed POST, this item will return noFailure(1).
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.5
fmCfgPOSTLoopbackResult mandatory
In the event that the FDDI module fails the loopback test during POST, this object will indicate which portion of the test caused the failure. If the value of fmCfgPOSTTest is an…
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.6
fmCfgResetToFactoryDefaults mandatory
Setting this object to reset(2) will cause the settings on the FDDI module to revert to factory defaults. The module will then be reset by the system. The module's packet operat…
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.8
fmCfgResetModule mandatory
Setting this object to reset(2) causes the module to be forced into a reset state. During the reset state, the module's packet operations will cease while the module resets to a …
columnEnumeration.1.3.6.1.4.1.437.1.1.2.2.1.1.1.1.9