ELECTROLINE-DHT-ENET-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
40
enetTestControlTable
table.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1
·
1 row entry
·
19 columns
Table of Test Controls Each entry is used to control a test instance. Tests parameters shall be inputed to the device first, then the enetTestControl MIB must be set the setupTest value and Ready status verified before starting a test.
An entry in the Table of Test Control. The will be one entry
per supported simultaneous tests.
per supported simultaneous tests.
Indexes
enetTestIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
enetTestIndex
Index for this set of test controls. One set controls one instance
of the test engine. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.1 |
||||||||||||
|
enetTestIdString
This String can be used by the management entity as a unique test
identifier string. The Enet module will simply copy this string in the result table. |
OctetStringr/w | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.2 |
||||||||||||
|
enetTestControl
Used to control the test engine. Once the control parameter for the
test are set, the management entity must set this to setupTest(2) & verify that the test control status returns ready before starting the test with … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.3 |
||||||||||||
|
enetTestSenderIP
This is the address of the sender entity for the test stream.
To set this device as the transmitter for the test, set this MIB to its IP address. |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.4 |
||||||||||||
|
enetTestSenderUDPPort
Port Number that the sender will use.
|
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.5 |
||||||||||||
|
enetTestReceiverIP
This is the address of the receiving entity for this test stream.
To set this device as the receiver for the test, set this MIB to its IP address. If both enetTestReceiverIP & enetTestSenderIP do not matc… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.6 |
||||||||||||
|
enetTestReceiverUDPPort
UDP port number to be used by the receiving entity.
In loopback mode the receiver Port number is also used as both the reception and source port of the loopbacking entity. |
Unsigned32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.7 |
||||||||||||
|
enetTestType
Sets the type of test to be ran. Selection is made between the following two:
voip(1): A VoIP simulation RTP test will be ran, sender will transmit packets simulating a voice codec and the VoIP metrics will be compu… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.8 |
||||||||||||
|
enetTestPacketSize
Size of the Ethernet packet (Including headers) to be used by this
test. Note that the packet size for rtp test is computed from the packet interval and the codec type. This MIB is used for packetLoss … |
Integer32r/w Constraints: range: 64-1514 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.9 |
||||||||||||
|
enetTestPacketInterval
Interval in milliseconds between each packets.
This parameter is used only for the RTP test type. |
Integer32r/w Constraints: range: 10-10range: 20-20range: 30-30 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.10 |
||||||||||||
|
enetTestPacketRate
Number of packets per seconds to be transmitted.
This parameter is used only for packetLoss test type. |
Integer32r/w Constraints: range: 0-255000 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.11 |
||||||||||||
|
enetTestNumOfPackets
Maximum duration of the test expressed in number of packets.
A sender will stop the transmitting when it reaches this amount. A receiver can use this parameter to know how many packets to expect. The … |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.12 |
||||||||||||
|
enetTestJitterBufferSize
Jitter buffer size in millisecond to be implemented by the receiving
entity. This will impact the total delay and the discarded packet count. The value set in this MIB must be a multiple of 20 millisecon… |
Integer32r/w Constraints: range: 0-200 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.13 |
||||||||||||
|
enetTestQosControl
This parameter tells the DHT is a specific service flow must be used
for the test. none(1): Means that the test will run in a best effort mode. preestablished(2): tells the DHT that a high … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.14 |
||||||||||||
|
enetTestCodecType
The Codec type to be used for the rtp test.
It is used by sender to set the appropriate value in the rtp header. The receiver can use this parameter in the computation of the R-Factor. Th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.15 |
||||||||||||
|
enetTestTosByte
Type of Service Byte to be used in the transmitted packets.
This parameter is used only for the rtp test type. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.16 |
||||||||||||
|
enetTestRoundTripTimeEstimate
The round trip time (in milliseconds) is used by the DHT in the computation of the CQE
R-Factor. It must be estimated by the management entity and supplied to the DHT via the use of this MIB for the RCQE result to be … |
Integer32r/w Constraints: range: 0-60000 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.17 |
||||||||||||
|
enetTestStatus
This MIB indicates the test status. A value of N/A(0) is returned
before the test is ran. A value of Running (1) is returned while the test is in progress. A value of Completed (2) is returned when the test is stoppe… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.18 |
||||||||||||
|
enetTestStatusString
This field is used by the device to further explain the Status of
the test. and its content is device specific. |
OctetString Constraints: range: 0-128 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.1.1.1.19 |
enetCurrentResultsTable
table.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1
·
1 row entry
·
21 columns
Table that contains the current cummulative test results.
This table is used for both packetLoss and RTP test types
but some values are valid only for the RTP tests.
The result values are reset each time the test is started.
Note that all the results for one entry are updated at once
when a get on the enetResultsStatus is performed. This ensures
that all displayed results where taken in the same period and
are coherent with each other.
An entry in the result table. Each simultaneous test has its own
entry. The index of the enetResultsEntry will match that of the
EnetTestControlEntry.
entry. The index of the enetResultsEntry will match that of the
EnetTestControlEntry.
Indexes
enetResultsIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
enetResultsIndex
Index for this set of data.
|
Unsigned32 Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.1 |
||||||
|
enetResultsIdString
A copy of the corresponding enetTestIdString string.
|
OctetString | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.2 |
||||||
|
enetResultsStatus
This MIB shows the result status. A value of partial(1) is returned
while the test is running. A value of complete(2) is returned if the test is stopped. The inconsistent(0)… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.3 |
||||||
|
enetResultsDuration
Total Duration of the test in milliseconds.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.4 |
||||||
|
enetResultsStartTime
System time at the beginning of the test.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.5 |
||||||
|
enetResultsStopTime
System time at the end of the test.
The value of this MIB is valid only if the enetResultsStatus is complete(2) |
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.6 |
||||||
|
enetResultsProcessedPacketCount
Total number of packets that have been processed by the device.
In transmission this indicates the number of packets sent In reception this is the sum of the good packets and the discarded packets. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.7 |
||||||
|
enetResultsLossPacketCount
Number of packets lost in the network before their arrival to this
device. The value reported by this MIB is valid only in the receiving end-point. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.8 |
||||||
|
enetResultsDiscardedPacketCount
Number of packets discarded by this device because they arrived too
late to be played out by the codec. The value reported by this MIB is valid only in the receiving end-point. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.9 |
||||||
|
enetResultsPacketLossRate
Lost packets over total number of expected packets expressed in percent.
The value reported by this MIB is valid only in the receiving end-point. |
ScaledPercentage Textual Convention: ScaledPercentage Unsigned32Type Constraints: range: 0..1000 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.10 |
||||||
|
enetResultsPacketDiscardRate
Discarded packets over total number of expected packets expressed in percent.
The value reported by this MIB is valid only in the receiving end-point. |
ScaledPercentage Textual Convention: ScaledPercentage Unsigned32Type Constraints: range: 0..1000 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.11 |
||||||
|
enetResultsMinInstantJitter
Minimum value of the Inter packet delay variation.
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.12 |
||||||
|
enetResultsMaxInstantJitter
Maximum value of the Inter packet delay variation.
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.13 |
||||||
|
enetResultsAvgInstantJitter
Average value of the Inter packet delay variation.
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.14 |
||||||
|
enetResultsMinRfcJitterLevel
Mimimum of the smoothed Jitter level computed as per rfc3550.
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.15 |
||||||
|
enetResultsMaxRfcJitterLevel
Maximum of the smoothed Jitter level computed as per rfc3550.
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.16 |
||||||
|
enetResultsAvgRfcJitterLevel
Average of the smoothed Jitter level computed as per rfc3550.
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.17 |
||||||
|
enetResultsRCQ
Computed R-Factor - Conversationnal Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
Rfactor Textual Convention: Rfactor Unsigned32Type Constraints: range: 0..120range: 127 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.18 |
||||||
|
enetResultsRLQ
Computed R-Factor - Listening Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
Rfactor Textual Convention: Rfactor Unsigned32Type Constraints: range: 0..120range: 127 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.19 |
||||||
|
enetResultsMOSCQ
Computed MOS - Conversationnal Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
ScaledMOSscore Textual Convention: ScaledMOSscore Integer32Type Constraints: range: 10..50range: 127 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.20 |
||||||
|
enetResultsMOSLQ
Computed MOS - Listenning Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point. of an RTP test. |
ScaledMOSscore Textual Convention: ScaledMOSscore Integer32Type Constraints: range: 10..50range: 127 |
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.21 |