enetResultsDiscardedPacketCount
ELECTROLINE-DHT-ENET-MIB ·
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.9
Object
column
SNMPv2-SMIGauge32
Number of packets discarded by this device because they arrived too late to be played out by the codec. The value reported by this MIB is valid only in the receiving end-point.
Context
- MIB
- ELECTROLINE-DHT-ENET-MIB
- OID
.1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- enetCurrentResultsEntry
- Table
- enetCurrentResultsTable
- Siblings
- 20
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| enetResultsIndex Index for this set of data. | column | Unsigned32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.1 |
| enetResultsPacketLossRate Lost packets over total number of expected packets expressed in percent.
The value reported by this MIB is valid only in the receiving end-point. | column | ScaledPercentage | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.10 |
| enetResultsPacketDiscardRate Discarded packets over total number of expected packets expressed in percent.
The value reported by this MIB is valid only in the receiving end-point. | column | ScaledPercentage | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.11 |
| enetResultsMinInstantJitter Minimum value of the Inter packet delay variation.
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.12 |
| enetResultsMaxInstantJitter Maximum value of the Inter packet delay variation.
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.13 |
| enetResultsAvgInstantJitter Average value of the Inter packet delay variation.
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.14 |
| enetResultsMinRfcJitterLevel Mimimum of the smoothed Jitter level computed as per rfc3550.
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.15 |
| enetResultsMaxRfcJitterLevel Maximum of the smoothed Jitter level computed as per rfc3550.
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.16 |
| enetResultsAvgRfcJitterLevel Average of the smoothed Jitter level computed as per rfc3550.
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.17 |
| enetResultsRCQ Computed R-Factor - Conversationnal Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | Rfactor | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.18 |
| enetResultsRLQ Computed R-Factor - Listening Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | Rfactor | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.19 |
| enetResultsIdString A copy of the corresponding enetTestIdString string. | column | OctetString | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.2 |
| enetResultsMOSCQ Computed MOS - Conversationnal Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | ScaledMOSscore | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.20 |
| enetResultsMOSLQ Computed MOS - Listenning Quality Equivalent as per ITU G.107
The value reported by this MIB is valid only in the receiving end-point.
of an RTP test. | column | ScaledMOSscore | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.21 |
| enetResultsStatus This MIB shows the result status. A value of partial(1) is returned
while the test is running. A value of complete(2) is returned if the
test is stopped. … | column | Enumeration | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.3 |
| enetResultsDuration Total Duration of the test in milliseconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.4 |
| enetResultsStartTime System time at the beginning of the test. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.5 |
| enetResultsStopTime System time at the end of the test.
The value of this MIB is valid only if the enetResultsStatus is
complete(2) | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.6 |
| enetResultsProcessedPacketCount Total number of packets that have been processed by the device.
In transmission this indicates the number of packets sent
In reception this is the sum of the good packets and the … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.7 |
| enetResultsLossPacketCount Number of packets lost in the network before their arrival to this
device.
The value reported by this MIB is valid only in the receiving end-point. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5802.1.3.1.2.5.1.12.1.3.3.1.1.8 |