DNOS-VPC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
30

agentVpcConfigTable

table obsolete
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7 · 1 row entry · 2 columns
Open in standard view 
VPC config table.
agentVpcConfigEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1
VPC config entry.
Indexes
agentVpcConfigId
Column Syntax OID
agentVpcConfigId obsolete
VPC Id. This object is obselete. Refer to agentVpcDomainIndex for configuring VPC Id.
Unsigned32
Constraints:
range: 1-63
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1.1
agentVpcTrackPortMask obsolete
Tracking of non-mlag links.
DELL-REF-MIBAgentPortMaskr/w
Textual Convention: DELL-REF-MIBAgentPortMask OctetString
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.7.1.2

agentPeerConfigTable

table obsolete
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8 · 1 row entry · 5 columns
Open in standard view 
VPC config table.
agentPeerConfigEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1
VPC config entry.
Indexes
agentPeerConfigRowIndex
Column Syntax OID
agentPeerConfigRowIndex obsolete
Index.
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.1
agentPeerIpAddr obsolete
To configure IP address of the peer VPC switch. This
configuration is used by the dual control plane detection
protocol (DCPDP) on the VPC switches.

NOTE: In order to set value for the object, need to set…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.2
agentSourceIpAddr obsolete
To configure Self IP address of the VPC switch that is used as
the source IP by the dual control plane detection protocol (DCPDP)
on the VPC switches.

NOTE: In order to set value for the object, need to s…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.3
agentDcpdpUdpPort obsolete
To configure the UDP port on which the VPC switch listens to
the DCPDP messages.
Configurable range is 1 to 65535. Default value is 50000.

NOTE: In order to set value for the object, need to set values fo…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.4
agentPeerRowStatus obsolete
Peer config status.

Supported values:
active(1) - valid instance.
createAndGo(4) - used to configure peer configuration.
destroy(6) - reset peer configuration.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.8.1.5

agentVpcDomainConfigTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9 · 1 row entry · 13 columns
Open in standard view 
VPC domain config table.
agentVpcDomainConfigEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1
VPC domain config entry.
Indexes
agentVpcDomainIndex
Column Syntax OID
agentVpcDomainIndex
VPC Domain ID.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.1
agentVpcDomainKeepalivePriority
To configure the priority of the VPC switch. This value is used
for the VPC role election.
Configurable range is 1 to 255. The default value is 100.
Note: The VPC switch with lower priority becomes the Primary. If
…
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.2
agentVpcDomainKeepaliveTimeout
To configure the peer keepalive timeout value (in seconds). If
an VPC switch does not receive keepalive messages from the peer
for this timeout value, it takes the decision to transition its
role (if required).
Configur…
Unsigned32r/w
Constraints:
range: 2-15
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.3
agentVpcDomainKeepaliveMode
To start/stop the keepalive state machine on the VPC device, if
VPC is globally enabled.
The following options are supported:

enable - Enable keepalive
disable - Disable keepalive
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.4
agentVpcDomainPeerDetectionMode
To start/stop the dual control plane detection protocol (DCPDP) on the
VPC switch.
The following options are supported:

enable - Enable the DCPDP on VPC switch
disable - Disable the DCPDP on VPC switch
…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.5
agentVpcDomainSystemMac
To configure the MAC address for the VPC domain. This mac-address
is used in the LACP PDUs and STP BPDUs
that are sent out on VPC member ports. For the VPC domain to use
the manually configured VPC MAC address, it sh…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.6
agentVpcDomainSystemPriority
To configure the system priority for the VPC domain. This is used
in the LACP PDUs sent out on VPC member ports. System-priority
should be configured same on both the VPC peers. If the configured
VPC system priority …
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.7
agentVpcDomainPeerDetectionInterval
To configure the DCPDP transmission interval.
NOTE: In order to set value for the object, need to set values for DCPDP
transmission interval and reception timeout simultaneously.
Unsigned32r/w
Constraints:
range: 200-4000
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.8
agentVpcDomainPeerDetectionTimeout
To configure the DCPDP reception timeout.
NOTE: In order to set value for the object, need to set values for DCPDP
transmission interval and reception timeout simultaneously.
Unsigned32r/w
Constraints:
range: 700-14000
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.9
agentVpcDomainPeerIpAddr
To configure IP address of the peer VPC switch. This
configuration is used by the dual control plane detection
protocol (DCPDP) on the VPC switches.

NOTE: In order to set value for the object, need to set…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.10
agentVpcDomainSourceIpAddr
To configure Self IP address of the VPC switch that is used as
the source IP by the dual control plane detection protocol (DCPDP)
on the VPC switches.

NOTE: In order to set value for the object, need to s…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.11
agentVpcDomainDcpdpUdpPort
To configure the UDP port on which the VPC switch listens to
the DCPDP messages.
Configurable range is 1 to 65535. Default value is 50000.

NOTE: In order to set value for the object, need to set values fo…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.12
agentVpcDomainStatus
Status of VPC Domain.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.1.9.1.13

agentVpcSelfMemberStatusTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14 · 1 row entry · 3 columns
Open in standard view 
VPC self member ports status table.
agentVpcSelfMemberStatusEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1
VPC self member port status entry.
Indexes
agentVpcSelfMemberStatusVpcId agentVpcSelfMemberStatusIntfId
Column Syntax OID
agentVpcSelfMemberStatusVpcId
VPC Id.
Unsigned32
Constraints:
range: 1-63
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.1
agentVpcSelfMemberStatusIntfId
Interface Id.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.2
agentVpcSelfMemberStatusIntfState
VPC self member interface status.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.14.1.3

agentVpcPeerMemberStatusTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15 · 1 row entry · 3 columns
Open in standard view 
VPC peer member ports status table.
agentVpcPeerMemberStatusEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1
VPC peer member port status entry.
Indexes
agentVpcPeerMemberStatusVpcId agentVpcPeerMemberStatusIntfId
Column Syntax OID
agentVpcPeerMemberStatusVpcId
VPC Id.
Unsigned32
Constraints:
range: 1-63
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.1
agentVpcPeerMemberStatusIntfId
Interface Id.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.2
agentVpcPeerMemberStatusIntfState
VPC peer member interface status.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.15.1.3

agentVpcStatusTable

table
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16 · 1 row entry · 4 columns
Open in standard view 
VPC status table.
agentVpcStatusEntry entry .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1
VPC status entry.
Indexes
agentVpcStatusId
Column Syntax OID
agentVpcStatusId
VPC Id.
Unsigned32
Constraints:
range: 1-63
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.1
agentVpcOperationalStatus
VPC operational status.
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.2
agentPortChannelId
Port-channel ID.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.3
agentVpcInterfaceState
The following states of a VPC port-channel interface mean:
DISABLE: The state of a port-channel before VPC functionality is enabled on it.
WAIT: The VPC port-channel 'waits' for the VPC functionality
to …
Enumeration
Enumerated Values:
1disable
2wait
3error
4active
5inactive
 .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.200.4.16.1.4