DASAN-ADSL-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
14
Rows
14
Columns
181
dsAdslLineExtnTable
table.1.3.6.1.4.1.6296.9.5.1.1.3
·
1 row entry
·
7 columns
This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662.
An entry (conceptual row) in the dsAdslLineExtnTable.
The Table is indexed by ifIndex.
The Table is indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsAdslLineExtnAction
this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.3.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineExtnUtopiaL2RxAddr
This object indicates UTOPIA Level 2 Rx address for a line.
|
Integer32 Constraints: range: 1-254 |
.1.3.6.1.4.1.6296.9.5.1.1.3.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineExtnUtopiaL2TxAddr
This object indicates UTOPIA Level 2 Tx address for a line.
|
Integer32 Constraints: range: 1-254 |
.1.3.6.1.4.1.6296.9.5.1.1.3.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineExtnTransAtucCap
The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.3.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineExtnTransAtucActual
The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1.
|
Bits Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.3.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineExtnClockType
This object indicates parameter to set use of either crystal or oscillator.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.3.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineExtnLineDmtTrellis
Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.3.1.7 |
dsAdslAtucPhysExtnTable
table.1.3.6.1.4.1.6296.9.5.1.1.4
·
1 row entry
·
28 columns
This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662.
An entry (conceptual row) in the dsAdslAtucPhysExtnTable.
The Table is indexed by ifIndex.
The Table is indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsAdslAtucPhysExtnOpState
This object indicates the operational state of the ATU. Values include idle,handshake, training, etc.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnActualStd
This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnBertError
This object indicates the No. of bit errors detected during BERT.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnTxAtmCellCounter
This object Provides transmit ATM cell counter.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnRxAtmCellCounter
This object Provides receive ATM cell counter.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnStartProgress
This object provides current detailed start up information to be used for debugging.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnIdleBertError
Number of bit errors.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnIdleBertCells
Number of idle cells.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnBertSync
Indicates if the Signal is in Sync or not.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnParametricTestResult
Indicates the Result of the Parametric Test conducted on the Xcvr.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDataBoostStatus
This object indicates whether DataBoost is utilized for the connection.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnTestArray
This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets.
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnChanPerfCD
The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.…
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnChanPerfBE
The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltHLINSCus
DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltHLINpsus
DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltHLOGMTus
DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltHLOGpsus
DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltQLNMTus
DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltQLNpsus
DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnDeltLastTxState
DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnPMState
Line Power Management State. (Not available for ADSL).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnChanPerfCU
The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnExtendedPsdStatus
GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2…
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnChipVersion
GlobespanVirata parameter that indicates the DSP version number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnPilotTone
GlobespanVirata parameter that indicates the Pilot Tone Index.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucMSGds
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.4.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAtucPhysExtnPsdMaskMode
GlobespanVirata parameter that indicates the actual Psd Mask currently being used.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.4.1.38 |
dsAdslAturPhysExtnTable
table.1.3.6.1.4.1.6296.9.5.1.1.5
·
1 row entry
·
12 columns
This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR.
An entry (conceptual row) in the dsAdslAturPhysExtnTable.
The Table is indexed by IfIndex.
The Table is indexed by IfIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsAdslAturPhysExtnConfig
This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode).
|
OctetString Constraints: range: 0-255 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnChanPerfCD
The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(…
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnChanPerfCU
The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnChanPerfBE
The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltHLINSCds
DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltHLINpsds
DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltHLOGMTds
DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltHLOGpsus
DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus).
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltQLNMTds
DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus).
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltQLNpsds
DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.
|
OctetString Constraints: range: 0-42 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturPhysExtnDeltLastTxState
DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus).
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.5.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslAturMSGus
Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.5.1.12 |
dsAdslAtucChanExtnTable
table.1.3.6.1.4.1.6296.9.5.1.1.6
·
1 row entry
·
4 columns
This table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662.
An entry (conceptual row) in the dsAdslAtucChanExtnTable.
The Table is indexed by ifIndex.
The Table is indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
dsAdslAtucChanExtnCurrAtmStatus
indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.6.1.1 |
||||||
|
dsAdslAtucChanExtnRsSymbols
Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.6.1.2 |
||||||
|
dsAdslAtucChanExtnRsDepth
Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.6.1.3 |
||||||
|
dsAdslAtucChanExtnRsRedundancy
Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6296.9.5.1.1.6.1.4 |
dsAdslAturChanExtnTable
table.1.3.6.1.4.1.6296.9.5.1.1.7
·
1 row entry
·
4 columns
This table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125).
An entry (conceptual row) in the dsAdslAturChanExtnTable.
The Table is indexed by IfIndex.
The Table is indexed by IfIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
dsAdslAturChanExtnCurrAtmStatus
This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.7.1.1 |
||||||
|
dsAdslAturChanExtnRsSymbols
This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal t…
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.7.1.2 |
||||||
|
dsAdslAturChanExtnRsDepth
This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.7.1.3 |
||||||
|
dsAdslAturChanExtnRsRedundancy
This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.7.1.4 |
.1.3.6.1.4.1.6296.9.5.1.1.8
·
1 row entry
·
25 columns
This table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662.
An entry (conceptual row) in the dsAdslAtucPerfDataExtnTable.
The Table is indexed by ifIndex.
The Table is indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAtucPerfDataExtnStatFastR
The value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.1 |
|
dsAdslAtucPerfDataExtnStatFailedFastR
The value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.2 |
|
dsAdslAtucPerfDataExtnStatSesL
The value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.3 |
|
dsAdslAtucPerfDataExtnStatUasL
The value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.4 |
|
dsAdslAtucPerfDataExtnCurr15MinFastR
Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.5 |
|
dsAdslAtucPerfDataExtnCurr15MinFailedFastR
Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.6 |
|
dsAdslAtucPerfDataExtnCurr15MinSesL
Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.7 |
|
dsAdslAtucPerfDataExtnCurr15MinUasL
Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.8 |
|
dsAdslAtucPerfDataExtnCurr1DayFastR
Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.9 |
|
dsAdslAtucPerfDataExtnCurr1DayFailedFastR
Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.10 |
|
dsAdslAtucPerfDataExtnCurr1DaySesL
Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.11 |
|
dsAdslAtucPerfDataExtnCurr1DayUasL
Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.12 |
|
dsAdslAtucPerfDataExtnPrev1DayFastR
Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.13 |
|
dsAdslAtucPerfDataExtnPrev1DayFailedFastR
Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.14 |
|
dsAdslAtucPerfDataExtnPrev1DaySesL
Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.15 |
|
dsAdslAtucPerfDataExtnPrev1DayUasL
Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.16 |
|
dsAdslAtucPerfDataExtnPrev1DayTimeElapsed
Total elapsed seconds in this interval in seconds.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.17 |
|
dsAdslAtucPerfDataExtnStatFecsL
Count of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.18 |
|
dsAdslAtucPerfDataExtnCurr15MinFecsL
Count of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.19 |
|
dsAdslAtucPerfDataExtnCurr1DayFecsL
NCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.20 |
|
dsAdslAtucPerfDataExtnPrev1DayFecsL
Count of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.21 |
|
dsAdslAtucPerfDataExtnStatLossL
Count of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.22 |
|
dsAdslAtucPerfDataExtnCurr15MinLossL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.23 |
|
dsAdslAtucPerfDataExtnCurr1DayLossL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.24 |
|
dsAdslAtucPerfDataExtnPrev1DayLossL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.8.1.25 |
.1.3.6.1.4.1.6296.9.5.1.1.9
·
1 row entry
·
16 columns
This table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440).
An entry (conceptual row) in the dsAdslAturPerfDataExtnTable.
The Table is indexed by ifIndex.
The Table is indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAturPerfDataExtnStatSesL
.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.1 |
|
dsAdslAturPerfDataExtnCurr15MinSesL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.2 |
|
dsAdslAturPerfDataExtnCurr1DaySesL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.3 |
|
dsAdslAturPerfDataExtnPrev1DaySesL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.4 |
|
dsAdslAturPerfDataExtnStatUasL
.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.5 |
|
dsAdslAturPerfDataExtnCurr15MinUasL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.6 |
|
dsAdslAturPerfDataExtnCurr1DayUasL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.7 |
|
dsAdslAturPerfDataExtnPrev1DayUasL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.8 |
|
dsAdslAturPerfDataExtnStatFecsL
Count of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL).
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.9 |
|
dsAdslAturPerfDataExtnCurr15MinFecsL
Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.10 |
|
dsAdslAturPerfDataExtnCurr1DayFecsL
Count of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.11 |
|
dsAdslAturPerfDataExtnPrev1DayFecsL
Count of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.12 |
|
dsAdslAturPerfDataExtnStatLossL
Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.13 |
|
dsAdslAturPerfDataExtnCurr15MinLossL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.14 |
|
dsAdslAturPerfDataExtnCurr1DayLossL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.15 |
|
dsAdslAturPerfDataExtnPrev1DayLossL
.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.9.1.16 |
.1.3.6.1.4.1.6296.9.5.1.1.10
·
1 row entry
·
5 columns
This table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662.
An entry (conceptual row) in the dsAdslAtucIntervalExtnTable.
The Table is indexed by ifIndex and adslAtucIntervalNumber.
The Table is indexed by ifIndex and adslAtucIntervalNumber.
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAtucIntervalNumber
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAtucIntervalExtnFastR
This variable indicates Count of seconds in the interval when there was Fast Retrains.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.10.1.1 |
|
dsAdslAtucIntervalExtnFailedFastR
This variable indicates Count of seconds in the interval when there was Failed Fast Retrains.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.10.1.2 |
|
dsAdslAtucIntervalExtnSesL
This variable indicates Count of seconds in the interval when there was severely errored seconds.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.10.1.3 |
|
dsAdslAtucIntervalExtnUasL
This variable indicates Count of seconds in the interval when there was unavailable errored seconds.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.10.1.4 |
|
dsAdslAtucIntervalExtnTimeElapsed
This variable indicates the total Elapsed time in this interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.10.1.5 |
.1.3.6.1.4.1.6296.9.5.1.1.12
·
1 row entry
·
13 columns
This table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable.
An entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable.
The Table is indexed by ifIndex.
The Table is indexed by ifIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAtucChanPerfDataExtnTimeElapsed
Total elapsed seconds in this interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.1 |
|
dsAdslAtucChanPerfDataExtnNcd
Count of no cell delineation(ncd) on this channel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.2 |
|
dsAdslAtucChanPerfDataExtnOcd
Count of out of cell delineation (ocd) on this channel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.3 |
|
dsAdslAtucChanPerfDataExtnHec
Header error check counter(hec) on this channel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.4 |
|
dsAdslAtucChanPerfDataExtnCurr15MinNcd
Count of no cell delineation(ncd) on this channel within the current 15 minute time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.5 |
|
dsAdslAtucChanPerfDataExtnCurr15MinOcd
Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.6 |
|
dsAdslAtucChanPerfDataExtnCurr15MinHec
Header error check counter(hec) on this channel within the current 15 minute time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.7 |
|
dsAdslAtucChanPerfDataExtnCurr1DayNcd
Count of no cell delineation (ncd) on this channel within the current 1 day time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.8 |
|
dsAdslAtucChanPerfDataExtnCurr1DayOcd
Count of out of cell delineation (ocd) on this channel within the current 1 day time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.9 |
|
dsAdslAtucChanPerfDataExtnCurr1DayHec
Header error check counter (hec) on this channel within the current 1 day time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.10 |
|
dsAdslAtucChanPerfDataExtnPrev1DayNcd
Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.11 |
|
dsAdslAtucChanPerfDataExtnPrev1DayOcd
Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.12 |
|
dsAdslAtucChanPerfDataExtnPrev1DayHec
Header error check counter(hec) on this channel within the most recent previous 1-day period.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.12.1.13 |
.1.3.6.1.4.1.6296.9.5.1.1.13
·
1 row entry
·
8 columns
This table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved).
An entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable.
The Table is indexed by IfIndex.
The Table is indexed by IfIndex.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAturChanPerfDataExtnNcd
Number of packets with no cell delineation(NCD) error on this channel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.1 |
|
dsAdslAturChanPerfDataExtnHec
Number of packets with Header error check (HEC) error on this channel.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.2 |
|
dsAdslAturChanPerfDataExtnCurr15MinNcd
Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.3 |
|
dsAdslAturChanPerfDataExtnCurr15MinHec
Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.4 |
|
dsAdslAturChanPerfDataExtnCurr1DayNcd
Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.5 |
|
dsAdslAturChanPerfDataExtnCurr1DayHec
Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.6 |
|
dsAdslAturChanPerfDataExtnPrev1DayNcd
Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.7 |
|
dsAdslAturChanPerfDataExtnPrev1DayHec
Number of packets with Header error check (HEC) error on this channel within the most recent previous period.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.13.1.8 |
.1.3.6.1.4.1.6296.9.5.1.1.14
·
1 row entry
·
4 columns
This table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662.
An entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable.
The Table is indexed by ifIndex and adslAtucChanIntervalNumber.
The Table is indexed by ifIndex and adslAtucChanIntervalNumber.
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAtucChanIntervalNumber
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAtucChanIntervalExtnTimeElapsed
Total time elapsed (in seconds) in this interval.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.14.1.1 |
|
dsAdslAtucChanIntervalExtnNcd
Indicates count of no cell delineation on this channel for this interval.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.14.1.2 |
|
dsAdslAtucChanIntervalExtnOcd
Indicates count of out cell delineation on this channel for this interval.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.14.1.3 |
|
dsAdslAtucChanIntervalExtnHec
Indicates Header error check counter on this channel during this interval.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.14.1.4 |
.1.3.6.1.4.1.6296.9.5.1.1.15
·
1 row entry
·
2 columns
This table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval.
An entry (conceptual row) in the dsAdslAturChanIntervalExtnTable.
The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber.
The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber.
Indexes
IF-MIBifIndex ADSL-LINE-MIBadslAturChanIntervalNumber
| Column | Syntax | OID |
|---|---|---|
|
dsAdslAturChanIntervalExtnNcd
Indicates count of no cell delineation on this channel for this interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.15.1.1 |
|
dsAdslAturChanIntervalExtnHec
Indicates Header error check counter on this channel during this interval.
|
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6296.9.5.1.1.15.1.2 |
.1.3.6.1.4.1.6296.9.5.1.1.16
·
1 row entry
·
28 columns
This table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable.
An entry (conceptual row) in the dsAdslLineConfProfileExtnTable.
The Table is indexed by adslLineConfProfileName.
The Table is indexed by adslLineConfProfileName.
Indexes
ADSL-LINE-MIBadslLineConfProfileName
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dsAdslLineConfProfileName
This object is used by the line configuration table in order to identify a row of this table.
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnRsIntCorrectionUp
Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnLineType
This object is used to configure the ADSL physical line mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnTxEndBin
Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively.
|
Integer32r/w Constraints: range: 6-511 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnTxStartBin
Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively.
|
Integer32r/w Constraints: range: 6-511 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnRxStartBin
Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01.
|
Integer32r/w Constraints: range: 1-511 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnRxEndBin
Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively.
|
Integer32r/w Constraints: range: 6-511 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnRxBinAdjust
Employs Rx Start/End bin settings.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnStandard
Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnTxPowerAttenuation
Specifies value of Tx power attenuation.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnRsFastOvrhdDown
Sets the percentage overhead for the downstream-fast buffer.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnIntCorrectionDown
This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnRsFastOvrhdUp
Sets the 4576014verhead for the upstream-fast buffer.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnAnnexType
This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnMaxDCo
This object is used to indicate Maximum interleaving depth supported by the customer's hardware.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnAdvertisedCapabilities
Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPsdMaskType
Selects the PSD mask option to be used.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnLineDmtConfMode
Selects if there is overlap or no overlap of bins.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnUpstreamPSD
This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPMMode
PM-related parameter used by the ATU-C to set the allowed link states.
|
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.16.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML0Time
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.43 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML2Time
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecut…
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.44 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML2ATPR
PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state.
|
Integer32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.45 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML2Rate
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s.
|
Integer32r/w Constraints: range: 256000-1024000 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.46 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnAtucConfMinINP
Parameter used to specify the minimum impulse noise protection
for the downstream bearer channel. |
Integer32 Constraints: range: 0-400 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.63 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML2EntryThresholdRate
PM configuration parameter, related to the L2 low power state.
This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and m… |
Integer32r/w Constraints: range: 256000-1024000 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.64 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML2ExitThresholdRate
PM configuration parameter, related to the L2 low power state.
This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2). The data rate is coded in bit/s, and mu… |
Integer32r/w Constraints: range: 256000-1024000 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.65 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
dsAdslLineConfProfileExtnPML2EntryRateMinTime
PM configuration parameter, related to the L2 low power state.
This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay below GSMIB_adslAtucConfGsPML2EntryThreshold… |
Integer32r/w Constraints: range: 900-65535 |
.1.3.6.1.4.1.6296.9.5.1.1.16.1.66 |
.1.3.6.1.4.1.6296.9.5.1.1.17
·
1 row entry
·
25 columns
This table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662.
An entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable.
The Table is indexed by adslLineAlarmConfProfileName.
The Table is indexed by adslLineAlarmConfProfileName.
Indexes
ADSL-LINE-MIBadslLineAlarmConfProfileName
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
dsAdslLineAlarmConfProfileName
This object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provid…
|
OctetString Constraints: range: 0-32 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.1 |
||||
|
dsAdslLineAlarmExtnAtucThresh15MinFailFastR
The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap.
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.2 |
||||
|
dsAdslLineAlarmExtnAtucThresh15MinSesL
The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap.
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.3 |
||||
|
dsAdslLineAlarmExtnAtucThresh15MinUasL
The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be …
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.4 |
||||
|
dsAdslLineAlarmExtnAtucOpStateTrapEnable
Enables and disables the OpStateChangeTrap.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.17.1.5 |
||||
|
dsAdslLineAlarmExtnAtucThresh15MinFecsL
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.6 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayLofs
The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.7 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayLoss
The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.8 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayLols
The number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.9 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayLprs
The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.10 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayESs
The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.11 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DaySesL
The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.12 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayUasL
The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.13 |
||||
|
dsAdslLineAlarmExtnAtucThresh1DayFecsL
The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.14 |
||||
|
dsAdslLineAlarmExtnAturThresh15MinFecsL
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'.
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.15 |
||||
|
dsAdslLineAlarmExtnAturThresh1DayLofs
The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.16 |
||||
|
dsAdslLineAlarmExtnAturThresh1DayLoss
The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.17 |
||||
|
dsAdslLineAlarmExtnAturThresh1DayLprs
The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.18 |
||||
|
dsAdslLineAlarmExtnAturThresh1DayESs
The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.19 |
||||
|
dsAdslLineAlarmExtnAturThresh1DaySesL
The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.20 |
||||
|
dsAdslLineAlarmExtnAturThresh1DayUasL
The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.21 |
||||
|
dsAdslLineAlarmExtnAturThresh1DayFecsL
The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'.
|
Integer32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.22 |
||||
|
dsAdslLineAlarmExtnAturThresh15MinSesL
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.23 |
||||
|
dsAdslLineAlarmExtnAturThresh15MinUasL
The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.
|
Integer32r/w Constraints: range: 0-900 |
.1.3.6.1.4.1.6296.9.5.1.1.17.1.24 |
||||
|
dsAdslLineAlarmExtnAtucPmStateTrapEnable
Enables and disables the PmStateChangeTrap.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6296.9.5.1.1.17.1.25 |