dsAdslLineConfProfileExtnPML2EntryThresholdRate

DASAN-ADSL-MIB · .1.3.6.1.4.1.6296.9.5.1.1.16.1.64
MIB view Table view

Object

column r/w Integer32 
PM configuration parameter, related to the L2 low power state.
This parameter specifies the downstream data rate threshold
that triggers autonomous entry into low power state (L2). The data rate
is coded in bit/s, and must be less than or equal to the value of
GSMIB_adslAtucConfGsPML2Exit ThresholdRate.

Context

MIB
DASAN-ADSL-MIB
OID
.1.3.6.1.4.1.6296.9.5.1.1.16.1.64
Type
column
Access
readwrite
Status
current
Parent
dsAdslLineConfProfileExtnEntry
Table
dsAdslLineConfProfileExtnTable
Siblings
27

Syntax

Integer32

Values & Constraints

Object Constraints
range: 256000-1024000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dsAdslLineConfProfileName
This object is used by the line configuration table in order to identify a row of this table.
columnOctetString.1.3.6.1.4.1.6296.9.5.1.1.16.1.1
dsAdslLineConfProfileExtnRxBinAdjust
Employs Rx Start/End bin settings.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.10
dsAdslLineConfProfileExtnStandard
Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.13
dsAdslLineConfProfileExtnTxPowerAttenuation
Specifies value of Tx power attenuation.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.15
dsAdslLineConfProfileExtnRsFastOvrhdDown
Sets the percentage overhead for the downstream-fast buffer.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.17
dsAdslLineConfProfileExtnIntCorrectionDown
This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.18
dsAdslLineConfProfileExtnRsFastOvrhdUp
Sets the 4576014verhead for the upstream-fast buffer.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.19
dsAdslLineConfProfileExtnAnnexType
This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.26
dsAdslLineConfProfileExtnRsIntCorrectionUp
Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.3
dsAdslLineConfProfileExtnMaxDCo
This object is used to indicate Maximum interleaving depth supported by the customer's hardware.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.30
dsAdslLineConfProfileExtnAdvertisedCapabilities
Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.32
dsAdslLineConfProfileExtnPsdMaskType
Selects the PSD mask option to be used.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.33
dsAdslLineConfProfileExtnLineDmtConfMode
Selects if there is overlap or no overlap of bins.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.34
dsAdslLineConfProfileExtnLineType
This object is used to configure the ADSL physical line mode.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.4
dsAdslLineConfProfileExtnUpstreamPSD
This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only.
columnEnumeration.1.3.6.1.4.1.6296.9.5.1.1.16.1.41
dsAdslLineConfProfileExtnPMMode
PM-related parameter used by the ATU-C to set the allowed link states.
columnBits.1.3.6.1.4.1.6296.9.5.1.1.16.1.42
dsAdslLineConfProfileExtnPML0Time
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into th…
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.43
dsAdslLineConfProfileExtnPML2Time
PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim …
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.44
dsAdslLineConfProfileExtnPML2ATPR
PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a sin…
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.45
dsAdslLineConfProfileExtnPML2Rate
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s.
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.46
dsAdslLineConfProfileExtnTxEndBin
Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively.
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.5
dsAdslLineConfProfileExtnTxStartBin
Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively.
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.6
dsAdslLineConfProfileExtnAtucConfMinINP
Parameter used to specify the minimum impulse noise protection for the downstream bearer channel.
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.63
dsAdslLineConfProfileExtnPML2ExitThresholdRate
PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2).…
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.65
dsAdslLineConfProfileExtnPML2EntryRateMinTime
PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay belo…
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.66
dsAdslLineConfProfileExtnRxStartBin
Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01.
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.8
dsAdslLineConfProfileExtnRxEndBin
Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively.
columnInteger32.1.3.6.1.4.1.6296.9.5.1.1.16.1.9